AMERICAN DJ Penta Pix [7/14] Default setting

ADJ Products, LLC - www.adj.com - Penta Pix Instruction Manual Page 13ADJ Products, LLC - www.adj.com - Penta Pix Instruction Manual Page 12

Penta Pix DMX Control

Universal DMX Control: This function allows you to use a univer-

sal DMX-512 controller to control the colors, chases, dimmer and

strobe. A DMX controller allows you to create unique programs tai-

lored to your individual needs.

1. The Penta Pix has 5 DMX Modes; a 4 Channel Mode, 8 Channel

Mode, 11 Channel Mode, 20 Channel Mode & 27 Channel Mode.

See pages 14-20 for a detailed description of the DMX traits.

Mode and to set the DMX address. After you have selected your

DMX mode and set the address, then connect your DMX control-

ler.

5. For longer cable runs (more than a 100 feet) use a terminator on

the last fixture.

6. For help operating in DMX mode consult the manual included

with your DMX controller.

Penta Pix System Menu

2. Press ENTER to change the running temperature When you

press ENTER the current temperature setting will begin to ash.

Use the UP and DOWN buttons to switch between the tempera-

the colors.

1. Press the MODE button until “Whitebal.” is displayed.

2. Press the ENTER button and the “LED” number will begin to

blink. Use the UP or DOWN buttons to nd the head you would

like to balance and press ENTER.

3. Use the UP or DOWN buttons scroll through the colors. Once

you nd the color you would like to adjust press ENTER.

4. Use the UP or DOWN buttons to adjust the color.

Default Settings - In this menu you can reset the unit

back to its default settings.

units together and operate without a controller. In a Master-Slave set

up one unit will act as the controlling unit and the others will react to the

controlling units programs. Any unit can act as a Master or as a Slave.

1. Using appropriate XLR cables, daisy chain your units together via

the XLR connector on the rear of the units. Remember the Male

XLR connector is the input and the Female XLR connector is the

output. The rst unit in the chain (master) will use the female XLR

con nector only - The last unit in the chain will use the male XLR

the last fixture.