![RME HDSP 9632 [7/87] Hardware installation](/img/pdf.png)
RME HDSP 9632 [7/87] Hardware installation
![RME HDSP 9632 [7/87] Hardware installation](/views2/2009491/page7/bg7.png)
User's Guide HDSP System HDSP 9632 © RME
7
5. Hardware Installation
Before installing the PCI card, please make sure the computer is switched off and the
power cable is disconnected from the mains supply. Inserting or removing a PCI card while
the computer is in operation can cause irreparable damage to both motherboard and card!
1. Disconnect the power cord and all other cables from the computer.
2. Remove the computer's housing. Further information on how to do this can be obtained
from your computer´s instruction manual.
3. Important: Before removing the HDSP 9632 from its protective bag, discharge any static in
your body by touching the metal chassis of the PC.
4. Prior to installation: Connect the HDSP 9632 card to any Expansion Board (if present) using
the supplied flat ribbon cable. Please read the Expansion Board's manual for more details.
5. Insert the HDSP 9632 firmly into a free PCI slot, press and fasten the screw.
6. If present, insert the Expansion Board(s) and fasten the screw(s).
7. Replace the computer's housing.
8. Reconnect all cables including the power cord.
6. Hardware - Connectors
6.1 External Connectors
The bracket of the
HDSP 9632 has one
ADAT optical input
and output, a 9-pin
and a 15-pin D-type
socket. The included
breakout cable pro-
vides all the analog
and digital connec-
tions.
The ADAT I/O can also be used as optical SPDIF I/O, if set up accordingly in the Settings dia-
log.
The 9-pin digital breakout cable has two RCA connectors as coaxial SPDIF I/O. The red phono
socket is the output. The breakout cable BO968 (option) has the same RCA connectors, but
adds an XLR AES/EBU input and output.
The 15-pin analog breakout cable has four RCA connectors (stereo analog I/O), a 1/4" TRS
jack (headphones), and two 5-pin DIN connectors (MIDI I/O). Using the optional analog XLR
breakout cable BO9632-XLRMKH, the HDSP 9632 offers balanced Line inputs and outputs via
female and male XLR connectors.
Optional HDSP 9632 Word Clock Module
The expansion board HDSP 9632 Word Clock Module provides one word clock input and two
word clock outputs. A green LED signals the LOCK state of the word clock input stage. A small
push switch allows to activate 75 Ohm termination for the word clock input. The yellow LED is lit
when termination is active.
Optional Analog Expansion Boards AI4S-192 and AO4S-192
These expansion boards increase the number of available channels by four balanced analog
inputs and outputs respectively. Thus the HDSP 9632 turns into an I/O solution with eight chan-
nels ADAT, two channels SPDIF and six channels analog, a sum of 16 channels in and out.
Although not being limited to 96 kHz, the name '19232' did not convince anyone at RME.
Содержание
- Dsp system hdsp 9632 1
- Hammerfal 1
- User s guide 1
- Driver installation and operation windows 2
- General 2
- Connections and totalmix 3
- Driver installation and operation mac os x 3
- Technical reference 4
- General 5
- Hdsp 9632 5
- User s guide 5
- Brief description and characteristics 6
- Introduction 6
- Package contents 6
- System requirements 6
- External connectors 7
- Hardware connectors 7
- Hardware installation 7
- Internal connectors 8
- Accessories 9
- Warranty 9
- Appendix 10
- Ce fcc compliance 11
- Iso 9001 11
- Note on disposal 11
- Driver installation and operation windows 13
- Hdsp 9632 13
- User s guide 13
- Deinstalling the drivers 14
- Driver and firmware 14
- Driver installation 14
- Driver update 14
- Configuring the hdsp 9632 15
- Firmware update 15
- Settings dialog 15
- Settings dialog dds 18
- Clock modes synchronisation 19
- Operation and usage 21
- Playback 21
- Dvd playback ac 3 dts under mme 22
- Notes on wdm 23
- Multi client operation 24
- Digital recording 25
- Analog recording 26
- General 26
- Known problems 26
- Operation under asio 2 26
- Operation under gsif gigasampler interface 27
- Windows 2000 xp 27
- Digicheck 28
- Using more than one hammerfall dsp 28
- General 29
- Hotline troubleshooting 29
- Installation 30
- Channel routing asio at 96 khz 31
- Diagrams 31
- Channel routing wdm at 96 khz 32
- Driver installation and operation mac os x 33
- Hdsp 9632 33
- User s guide 33
- Driver and flash update 34
- Driver installation 34
- Driver update 34
- Flash update 34
- Configuring the hdsp 9632 35
- Settings dialog 35
- Settings dialog dds 37
- Clock modes synchronisation 38
- Mac os x faq 40
- Midi doesn t work 40
- Round about driver installation 40
- Pci card and pci slot compatibility 41
- Repairing disk permissions 41
- Supported sample rates 41
- Various information 41
- Hotline troubleshooting 42
- Diagram channel routing at 96 khz 43
- Connections and totalmix 45
- Hdsp 9632 45
- User s guide 45
- Analog connections 46
- Line inputs 46
- Headphones 47
- Line outputs 47
- Digital connections 48
- Word clock 50
- Word clock input and output optional word clock module 50
- Technical description and usage 51
- Cabling and termination 52
- Operation 52
- Overview 53
- Totalmix routing and monitoring 53
- The user interface 55
- Elements of a channel 56
- Tour de totalmix 56
- Mute und solo 58
- Submix view 58
- Presets 59
- The quick access panel 59
- Preferences 61
- The monitor panel 61
- Editing the names 62
- Hotkeys 63
- Menu options 64
- Level meter 65
- Elements of the matrix view 66
- Operation 66
- Overview 66
- Totalmix the matrix 66
- Advantages of the matrix 67
- Asio direct monitoring windows only 67
- Totalmix super features 67
- Copy routings to other channels 68
- Delete routings 68
- Selection and group based operation 68
- Recording a subgroup loopback 69
- Using external effects devices 70
- Mapping 71
- Overview 71
- Totalmix midi remote control 71
- Operation 72
- Simple midi control 73
- Loopback detection 74
- Hdsp 9632 75
- Technical reference 75
- User s guide 75
- Tech info 76
- Analog 77
- Technical specifications 77
- Digital inputs 78
- Digital outputs 78
- Digital 79
- Lock and synccheck 80
- Technical background 80
- Latency and monitoring 81
- Ds double speed 82
- Aes ebu spdif 83
- Qs quad speed 83
- Noise level in ds qs mode 84
- Steadyclock 84
- Block diagram hdsp 9632 85
- Diagrams 85
- Connector pinouts 86
- Overview channels expansion boards 87
Похожие устройства
- RCF C 5215-94 Руководство по эксплуатации
- Jedia JPA-1360B Руководство по эксплуатации
- IMAGE-LINE FL Studio 20 Producer Edition Руководство по эксплуатации
- DTS FOS 100 SOLO POWER FC Руководство по эксплуатации
- DTS FOS 100 SOLO POWER CT Руководство по эксплуатации
- DTS FOS 100 POWER FC Руководство по эксплуатации
- JBL PMB Pole Mount Bracket Руководство по эксплуатации
- JBL CONTROL 19 CST Руководство по эксплуатации
- JBL ASB6118 Руководство по эксплуатации
- K-ARRAY KK202K Руководство по эксплуатации
- K-ARRAY KK102 Руководство по эксплуатации
- K-ARRAY KAN200+ Руководство по эксплуатации
- K-ARRAY KJ50vb Руководство по эксплуатации
- K-ARRAY KA24 Руководство по эксплуатации
- Dsppa MP-8712 Руководство по эксплуатации
- DPA MMC4018 Руководство по эксплуатации
- CIOKS DC5 Link Руководство по эксплуатации
- CAMEO G Scan 80 LED Gobo Scanner 80W Руководство по эксплуатации
- CAMEO Scuba Руководство по эксплуатации
- CAMEO Flat PAR 1 RGBW IR Bk Руководство по эксплуатации