![RME HDSP 9632 [71/87] Totalmix midi remote control](/img/pdf.png)
RME HDSP 9632 [71/87] Totalmix midi remote control
![RME HDSP 9632 [71/87] Totalmix midi remote control](/views2/2009491/page71/bg47.png)
User's Guide HDSP System HDSP 9632 © RME
71
Unfortunately, very often it is not possible within the record software to assign a different input
channel to an existing track 'on the fly'. The loopback mode solves this problem elegantly. The
routing scheme stays the same, with the input channel 1 sent to any output via TotalMix, to the
Compressor, from the Compressor back to any input. Now this input signal is routed directly to
output 1, and output 1 is then switched into loopback mode via Ctrl-mouse.
As explained in chapter 29.5, the hardware input of channel 1 now no longer feeds the record
software, but is still connected to TotalMix (and thus to the Compressor). The record software
receives the signal of submix channel 1 instead – the Compressor's return path.
30. TotalMix MIDI Remote Control
30.1 Overview
TotalMix can be remote controlled via MIDI. It is compatible to the widely spread Mackie Control
protocol, so TotalMix can be controlled with all hardware controllers supporting this standard.
Examples are the Mackie Control, Tascam US-2400 or Behringer BCF 2000.
Additionally, the stereo output faders (lowest row) which are set up as Monitor Main outputs in
the Monitor panel can also be controlled by the standard Control Change Volume via MIDI
channel 1. With this, the main volume of the HDSP 9632 is controlable from nearly any MIDI
equipped hardware device.
30.2 Mapping
TotalMix supports the following Mackie Control surface elements*:
Element: Meaning in TotalMix:
Channel faders 1 – 8 volume
Master fader Main Monitor channel's faders
SEL(1-8) + DYNAMICS reset fader to Unity Gain
V-Pots 1 – 8 pan
pressing V-Pot knobs pan = center
CHANNEL LEFT or REWIND move one channel left
CHANNEL RIGHT or FAST FORWARD move one channel right
BANK LEFT or ARROW LEFT move eight channels left
BANK RIGHT or ARROW RIGHT move eight channels right
ARROW UP or Assignable1/PAGE+ move one row up
ARROW DOWN or Assignable2/PAGE- move one row down
EQ Master Mute
PLUGINS/INSERT Master Solo
STOP Dim Main Monitor
PLAY Talkback
PAN Mono Main Monitor
MUTE Ch. 1 – 8 Mute
SOLO Ch. 1 – 8 Solo
SELECT Ch. 1 – 8 Select
REC Ch. 1 – 8 in Submix mode only: select output bus
F1 - F8 load preset 1 - 8
F9 select Main Monitor
F10 - F12 Monitor Phones 1 - 3
*Tested with Behringer BCF2000 Firmware v1.07 in Mackie Control emulation for Steinberg mode and with Mackie
Control under Mac OS X.
Содержание
- Dsp system hdsp 9632 1
- Hammerfal 1
- User s guide 1
- Driver installation and operation windows 2
- General 2
- Connections and totalmix 3
- Driver installation and operation mac os x 3
- Technical reference 4
- General 5
- Hdsp 9632 5
- User s guide 5
- Brief description and characteristics 6
- Introduction 6
- Package contents 6
- System requirements 6
- External connectors 7
- Hardware connectors 7
- Hardware installation 7
- Internal connectors 8
- Accessories 9
- Warranty 9
- Appendix 10
- Ce fcc compliance 11
- Iso 9001 11
- Note on disposal 11
- Driver installation and operation windows 13
- Hdsp 9632 13
- User s guide 13
- Deinstalling the drivers 14
- Driver and firmware 14
- Driver installation 14
- Driver update 14
- Configuring the hdsp 9632 15
- Firmware update 15
- Settings dialog 15
- Settings dialog dds 18
- Clock modes synchronisation 19
- Operation and usage 21
- Playback 21
- Dvd playback ac 3 dts under mme 22
- Notes on wdm 23
- Multi client operation 24
- Digital recording 25
- Analog recording 26
- General 26
- Known problems 26
- Operation under asio 2 26
- Operation under gsif gigasampler interface 27
- Windows 2000 xp 27
- Digicheck 28
- Using more than one hammerfall dsp 28
- General 29
- Hotline troubleshooting 29
- Installation 30
- Channel routing asio at 96 khz 31
- Diagrams 31
- Channel routing wdm at 96 khz 32
- Driver installation and operation mac os x 33
- Hdsp 9632 33
- User s guide 33
- Driver and flash update 34
- Driver installation 34
- Driver update 34
- Flash update 34
- Configuring the hdsp 9632 35
- Settings dialog 35
- Settings dialog dds 37
- Clock modes synchronisation 38
- Mac os x faq 40
- Midi doesn t work 40
- Round about driver installation 40
- Pci card and pci slot compatibility 41
- Repairing disk permissions 41
- Supported sample rates 41
- Various information 41
- Hotline troubleshooting 42
- Diagram channel routing at 96 khz 43
- Connections and totalmix 45
- Hdsp 9632 45
- User s guide 45
- Analog connections 46
- Line inputs 46
- Headphones 47
- Line outputs 47
- Digital connections 48
- Word clock 50
- Word clock input and output optional word clock module 50
- Technical description and usage 51
- Cabling and termination 52
- Operation 52
- Overview 53
- Totalmix routing and monitoring 53
- The user interface 55
- Elements of a channel 56
- Tour de totalmix 56
- Mute und solo 58
- Submix view 58
- Presets 59
- The quick access panel 59
- Preferences 61
- The monitor panel 61
- Editing the names 62
- Hotkeys 63
- Menu options 64
- Level meter 65
- Elements of the matrix view 66
- Operation 66
- Overview 66
- Totalmix the matrix 66
- Advantages of the matrix 67
- Asio direct monitoring windows only 67
- Totalmix super features 67
- Copy routings to other channels 68
- Delete routings 68
- Selection and group based operation 68
- Recording a subgroup loopback 69
- Using external effects devices 70
- Mapping 71
- Overview 71
- Totalmix midi remote control 71
- Operation 72
- Simple midi control 73
- Loopback detection 74
- Hdsp 9632 75
- Technical reference 75
- User s guide 75
- Tech info 76
- Analog 77
- Technical specifications 77
- Digital inputs 78
- Digital outputs 78
- Digital 79
- Lock and synccheck 80
- Technical background 80
- Latency and monitoring 81
- Ds double speed 82
- Aes ebu spdif 83
- Qs quad speed 83
- Noise level in ds qs mode 84
- Steadyclock 84
- Block diagram hdsp 9632 85
- Diagrams 85
- Connector pinouts 86
- Overview channels expansion boards 87
Похожие устройства
- RCF C 5215-94 Руководство по эксплуатации
- Jedia JPA-1360B Руководство по эксплуатации
- IMAGE-LINE FL Studio 20 Producer Edition Руководство по эксплуатации
- DTS FOS 100 SOLO POWER FC Руководство по эксплуатации
- DTS FOS 100 SOLO POWER CT Руководство по эксплуатации
- DTS FOS 100 POWER FC Руководство по эксплуатации
- JBL PMB Pole Mount Bracket Руководство по эксплуатации
- JBL CONTROL 19 CST Руководство по эксплуатации
- JBL ASB6118 Руководство по эксплуатации
- K-ARRAY KK202K Руководство по эксплуатации
- K-ARRAY KK102 Руководство по эксплуатации
- K-ARRAY KAN200+ Руководство по эксплуатации
- K-ARRAY KJ50vb Руководство по эксплуатации
- K-ARRAY KA24 Руководство по эксплуатации
- Dsppa MP-8712 Руководство по эксплуатации
- DPA MMC4018 Руководство по эксплуатации
- CIOKS DC5 Link Руководство по эксплуатации
- CAMEO G Scan 80 LED Gobo Scanner 80W Руководство по эксплуатации
- CAMEO Scuba Руководство по эксплуатации
- CAMEO Flat PAR 1 RGBW IR Bk Руководство по эксплуатации