Jaguar Pro5 [66/96] Adjusting stitch width and length

Jaguar Pro5 [66/96] Adjusting stitch width and length
64
mm 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
0
0.25
0.5
0.75
1.0
1.25
1.5
1.75
2.0
2.5
3.0
Under side
Изнанка
Зворотний бік
Теріс жағы
Top side
Лицевая сторона
Лицьовий бік
Оң жағы
ZIGZAG STITCHING
SETTINGS :Presser foot - General Purpose Foot
:Thread tension control - AUTO
The top thread may appear on the bottom depending on the thread, fabric, type of stitch and
sewing speed, but the bobbin thread must never appear on the top of the fabric.
If bobbin thread is pulling to the top or you are experiencing puckering, slightly reduce the
tension with the Thread Tension Control.
ADJUSTING STITCH WIDTH AND LENGTH
Dark grey box indicates the Auto/default value set automatically when the pattern is
selected.
For the Zigzag Pattern the stitch length is 2 mm and the stitch width is 5 mm.
The light grey boxes indicate all the possible personal preference options available to
set manualy.
NOTE: The values shown in the chart are actual sewing lengths and widths and do
not correspond to the scale and number markings on the sewing machine.
Center position
Центральное положение
Центральне положення
Орталық күй
STITCH LENGTH
ДЛИНА СТЕЖКА
ДОВЖИНА СТІБКА
ҚАБУДЫҢ ҰЗЫНДЫҒЫ
STITCH WIDTH
ШИРИНА СТЕЖКА
ШИРИНА СТІБКА
ҚАБУДЫҢ ЕНІ
SATIN STITCH
This is a closely spaced zig zag stitch used for appliqué, bar-tacking, etc. Slightly loosen the
top thread tension and manually adjust the stitch length between 0.5 and 2.0 for satin stitching.
Use a backing of stabilizer for lightweight fabrics to avoid puckering.
NOTE: When sewing a dense stitch, the Satin Stitch Foot (Optional) MUST be
used.
PLACEMENT OF PATTERNS
Stitch width of pattern increases from center needle position as illustrated.

Содержание

Похожие устройства

Скачать