Thomson CF20A02 [44/60] Hot water preparation function

Thomson CF20A02 [44/60] Hot water preparation function
Assemble an automatic milk frothing
system, as described in the section
«Automatic milk frothing system».
(page 19)
1. Fill the milk container with chilled
milk and close the lid. Turn on the
appliance by pressing the on/off
button and make sure that there is
drip tray under the coffee supply unit,
and the water tank is filled. Appliance
will perform automatic rinsing; you
can stop it by pressing the hot water
button.
2. Place the cup under the coffee supply
unit.
3. Tap the button with the milk frothing
function The button indicator
lights up during operation.
4. After use, the automatic milk frothing
system must be thoroughly cleaned
(see «Daily cleaning of appliance»,
Milk frothing function
Hot water preparation function
section «Cleaning of the automatic
milk frothing system»).
Note:
Clean the automatic milk frothing
system before the first use.
Use cold milk (at a temperature of
approximately 5°C/41°F) to ensure an
optimal frothing result. Experiment with
different brands of milk.
Warning:
Milk frothing is performed with the help
of steam. Beware of burns.
After use, put the flexible milk tube (15)
around the lid of the milk container.
Do not let it fall freely, so that the milk
does not splash due to the pressure
difference.
1. Place the cup under the coffee supply
unit.
2. Press the hot water button, only
the hot water button will light up
indicating that hot water is being
prepared. The indicator lights up
during the making process.
44 Operating manual

Содержание

Скачать
Случайные обсуждения