Thomson CF20A02 [54/60] Self cleaning

If indicator is lit, it means that the appliance needs to be self-cleaned. The

appliance will remain in the best condition if this function is performed at least once

a month or more often, depending on the hardness of the water used.

1. Fill the water tank completely.

2. Add one package of cleaning agent to the water tank (included).

IMPORTANT: Do not use vinegar or other cleaning agents not intended for decalcifying

coffee machines. The use of other cleaning agents not intended for decalcifying

coffee machines can damage the appliance.

3. Plug the appliance into an outlet.

4. Put a large enough container under the coffee dispenser.

5. In standby mode, press and hold button and the espresso button for 5

seconds. You will hear a beep and indicators will start flashing.

6. Press the espresso button to confirm the self-cleaning process. To return to

standby mode, press

7. will flash, it means that the appliance is in the process of self-cleaning. Caution:

Hot water. Be careful. Beware of burns.

8. When all the water in the water tank is drained, and the espresso button

will flash. Remove all remaining solution from the water tank and fill the tank

with normal clean drinking water to the maximum position. When the water tank

will be filled, will go off. Then the machine will continue the descaling process,

first the machine will drain half of the water tank, and then wait for about 1 minute,

after which it will drain the remaining water from the water tank.

9. When the self-cleaning process is completed, the appliance will automatically

turn off.

Note: To ensure that the descaling process is completed, be patient during the

process and make sure that the appliance turns off automatically.

It is recommended to use the drain function before a long period of downtime or

before contacting a service center.

Self-cleaning

Drain function

54 Operating manual