Thomson CF20A02 [57/60] Troubleshooting

Thomson CF20A02 [57/60] Troubleshooting
Troubleshooting
PROBLEM CAUSE REMEDY
Appliance doesn't work. Appliance is not connected to the
power supply.
Connect the appliance to the power
supply and turn it on. Check the cable
and plug
When the buttons on the appliance
display are pressed, they do not work
or react slowly.
- The appliance is under the influence
of electromagnetic interference
- The panel of appliance is dirty.
- Disconnect the appliance from the
power supply. Restart the appliance
after a few minutes.
- Clean the case with a cloth.
Coffee is not hot enough. - Cups were not preheated.
- Brewing unit is too cold.
Before making coffee, rinse the
appliance at least 3 times.
Coffee does not flow from dispenser. The drain function may have
been used.
Press the hot water button until water
flows out of the dispenser.
The first cup of low-quality coffee. When the coffee grinder is first
started, a sufficient amount of coffee
beans does not enter the brewing
unit.
Drain the first cup of coffee. The
remaining cups of coffee will be of
good quality.
There is no coffee foam. The coffee beans are not fresh. Replace the coffee beans or use a
different brand of coffee.
The touch buttons do not respond to
pressing.
Do not press indicators on the front
panel.
Click on the lower part of the
touch button icon on the top of the
appliance.
Appliance will take a long time to
turn on.
It is necessary to clean the appliance. Start the self-cleaning function.
The water tank is being removed/the
water level is very low, but there is no
warning signal.
The area near the water tank is wet. Wipe the water tank connector.
Inner drip tray is filled with great
amount of water.
The coffee powder is too fine,
it blocks the water supply.
Adjust the grinding degree to a
higher level on the handle of the
grinder regulator.
The coffee is supplied too slowly or
a drop at a time.
The coffee powder is too fine,
it blocks the water supply.
Adjust the grinding degree to a
higher level on the handle of the
grinder regulator.
The no coffee indicator flashes,
although there is coffee in the coffee
bean container.
The inner passage of the coffee
is blocked.
Follow the instructions in the cleaning
section of the appliance.
The hole of the connecting nozzle on
the flexible tube is clogged with milk
residues that are difficult to clean.
The connecting tip and the flexible
tube must not be cleaned for a long
time. This may cause damage to the
appliance.
Immerse the milk connecting tube
in warm water for an hour, follow
the instructions for «cleaning the
milk container and the flexible milk
tube» in the «Daily cleaning of the
appliance» section, continue to use
the milk foaming function for cleaning
until the water flows out of the
dispenser smoothly. Use a hook and
brush to clean the hole.
57Automatic coffee machine CF20A02

Содержание

Скачать
Случайные обсуждения