KRAFT KF-HBM1043BGLR [24/44] Troubleshooting

KRAFT KF-HBM1043BGLR [24/44] Troubleshooting
24
hand blender
USer GUIde
Store the device in a dry, clean, ventilated place away from heating devices and direct
sunlight. During transportation and storage, do not expose the device to mechanical
inuences that may damage the device and/or violate the integrity of the package. Keep
the packaging of the device away from water and other liquids.
ATTENTION! Keep the device out of the reach of children!

During operation, if malfunctions are detected that the consumer cannot eliminate
on their own, it is necessary to contact the service workshop. But before contacting the
repair service, read this section. This list includes the most common cases that are not
the result of poor assembly quality or poor-quality materials used in this device.
ATTENTION! Before troubleshooting, it is necessary to disconnect the device
from the power supply. Troubleshooting that is not presented in this manual should
be carried out only by a qualied and competent specialist.
Malfunction  
The device does not turn on.
The device is not connected
to the power supply.
Connect the device to the
power supply.
The electrical outlet is faulty.
Plug the device into a
working outlet.
When grinding products, a
strong vibration of the device
is felt.
The products are cut too
large.
Cut the products smaller.
The engine stopped during
operation.
Overload and overheating
protection has been
activated.
Follow the instructions in
the section “Overload and
overheating protection”
During the operation of the
device, an extraneous smell
appeared.
The device overheats during
operation.
Reduce the time of
continuous operation,
increase the intervals
between switching on the
device.
In case of malfunctions that are not prescribed in this manual, you should immediately
contact an authorized service center, specifying the type of problem and the model of
your immersion blender. Only original spare parts can be used for repairs. Unskilled
repairs remove the device from warranty service.
IMPORTANT! During the operation of the immersion blender, the sound of the
electric motor running can be heard and a slight vibration can be created. This is
normal and is not a malfunction.

Содержание

Похожие устройства

Скачать