Coolfort CF-3400 [4/28] English

Coolfort CF-3400 [4/28] English
4
ENGLISH
IRON CF-3400
The iron is intended for ironing clothes, bedding and for
vertical steaming of fabrics.
DESCRIPTION
1. Water spray
2. Water inlet lid
3. «Continuous Steam Supply» Switch
4. Burst of steam button
5. Water spray button
6. Handle
7. Heating element on/off/auto switch-off indicator
8. Self-Clean Button
9. Iron base
10. Water tank
11. Temperature control knob
12. Maximum water level mark
13. Iron soleplate
14. Beaker
«Continuous Steam Supply» Switch (3)
15. Steam Supply is off
16. Steam Supply is on
17. Steam Supply is at maximum
ATTENTION!
For additional protection it is reasonable to install a residual
current device (RCD) with nominal operation current not
exceeding 30 mA, to install RCD, contact a specialist.
SAFETY MEASURES
Before using the electrical unit, read this instruction manual
carefully and keep it for future reference.
Use the unit for its intended purpose only, as specified in
this manual. Mishandling of the unit may lead to its breakage
and cause harm to the user or damage to his/her property.
Before switching the unit on, make sure that your home
mains voltage corresponds to the unit operating voltage.
The power cord is equipped with a Euro-plug; insert it
into a socket that has a reliable grounding connection.
To avoid fire, do not use adapters for plugging the unit in.
To avoid mains overloading, provide the at no other
electrical appliances with higher power consumption are
connected to the same outlet.
Do not use the iron outdoors and in places with high
humidity.
Place the iron on a flat stable surface or use a stable
ironing board.
ATTENTION! The surfaces of the iron get hot during opera-
tion. Keep open skin areas away from iron hot surfaces or
outgoing steam to avoid burns.
Do not fill the water tank with scented liquids, vinegar,
starch solution, descaling reagents, chemicals etc.
Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
To avoid damaging the soleplate be very careful when
ironing clothes with metal zippers or buttons.
Make sure that the power cord is not on the ironing board
and it doesn’t touch hot surfaces and sharp edges.
Never leave the unit connected to the mains unattended.
During breaks in operation and when the iron is cooling
down, put the iron on the base (in a vertical position).
Before plugging/unplugging the iron, set the tempera-
ture control knob to the minimum position and switch the
continuous steam supply off.
Always unplug the iron if you are not using it.
Always take the power plug out of the mains socket
before filling the water tank with water.
The water inlet lid should be closed during ironing.
To unplug the iron, always hold the power plug, never
pull the power cord.
To avoid electric shock, do not immerse the iron, the
power cord and the plug into water or any other liquids.
Before taking the iron away, let it cool down completely
and pour out the remaining water.
Pour out water from the water tank only after unplug-
ging the iron.
Clean the unit regularly.
Do not touch the unit body and the power plug with wet
hands.
Do not allow children to touch the iron body and the
power cord during operation.
Do not leave children unattended to avoid them using
the unit as a toy.
For children safety reasons do not leave polyethylene
bags, used as packaging, unattended.
Attention! Do not allow children to play with polyethylene
bags or packaging film. Danger of suffocation!
This unit is not intended for usage by children. Place the
unit out of reach of children during operation and cool-
ing down.
The unit is not intended to be used by people with physi-
cal, sensory or mental disabilities (including children) or
by persons lacking experience or knowledge if they are
not under supervision of a person who is responsible for
their safety or if they are not instructed by this person on
the usage of the unit.
Do not use the unit if the power plug or the power cord
is damaged. If the power cord is damaged, it should be
replaced by the manufacturer, maintenance service or
similar qualified personnel to avoid danger.
Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it
was dropped, unplug the unit and apply to any authorized
service center from the contact address list given in the
warranty certificate and on the website www.coolfort.ru.
Transport the unit in the original package only.
Keep the unit out of reach of children and disabled per-
sons.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low temperature
keep it for at least three hours at room temperature
before switching on.
Unpack the iron; remove the protection from the sole-
plate (13), if any.
Check the unit for damages, do not use the iron in case
of damages.
Before switching the iron on, make sure that your home
mains voltage corresponds to the iron operating voltage.
There may be water residue in the tank (10), this is nor-
mal, as the iron has undergone factory quality control.
Note:
While the first switching on the heating element of the
iron burns, therefore occurrence of foreign smell and a
small amount of smoke is possible, it is normal.

Содержание

Похожие устройства

Скачать