Coolfort CF-3400 [6/28] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Coolfort CF-3400 [6/28] English

Coolfort CF-3400 [6/28] English
6
ENGLISH
• Place the iron on its base (9).
• Set the continuous steam supply knob (3) to the position
(15) – the steam supply is off.
• Insert the power plug into the mains socket.
• Make sure that there is enough water in the water
tank (10).
• Turn the control knob (11) to set the required ironing
temperature: «•••» or «MAX», the pilot lamp (7) will
light up.
• When the soleplate (13) reaches the set temperature, the
indicator (7) will go out, you can start ironing.
• Turn the Continuous Steam Supply Knob (3) into the
position (16) – Steam Supply is on; steam will start
coming out of the outlet vents on the soleplate (13) of
the iron.
• For «double steam» supply set the switch to the utmost
right position (17) and hold it, steam will start outgoing
from the soleplate (13) openings more intensively.
• After you finish ironing, set the temperature control knob
(11) to the position «MIN», and the continuous steam
supply knob (3) to the position (15) – steam supply is off.
• Pull the power plug out of the mains socket and let the
iron cool down completely.
ATTENTION!
If the steam is not constantly supplied during operation,
check whether the temperature control knob (11) is set
properly and there is water in the water tank (10).
BURST OF STEAM
The burst of steam function is useful for ironing folds and
can only be used at high ironing temperatures (when the
temperature control knob (11) is set to the position «•••»,
«МАХ»).
• When pressing the burst of steam button (4) steam will
go out of the iron soleplate more intensively.
Note:
To avoid water leakage from the steam openings, press
the burst of steam button (4) with an interval no less than
4-5 sec.
VERTICAL STEAM
Vertical steam function can be used only at high ironing
temperatures (that is, when the temperature control knob
(11) is set to «•••» or «MAX»). Hold the iron vertically at the
distance of 10-30 cm from the clothes and press the burst
of steam button (4) with an interval no less than 4-5 sec.,
steam will be released from the openings of the iron sole-
plate (13) intensively.
IMPORTANT INFORMATION: Vertical steaming is not
recommended for synthetic fabrics.
• To avoid fabric melting, do not touch it with the iron sole-
plate while steaming.
• Never steam clothes on a person as temperature of the
released steam is very high, use a clothes hanger or a
coat rack.
• After you finish ironing, switch the iron off, wait until it
cools down completely, then open the water inlet lid (2),
turn over the iron and pour out the remaining water.
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recommend cleaning the
steam chamber regularly.
• Set the continuous steam supply knob (3) to the posi-
tion (15).
• Fill the water tank (10) up to the maximal mark «MAX».
• Place the iron on its base (9).
• Insert the power plug into the mains socket.
• Set the control knob (11) to the maximum soleplate
temperature «MAX», the indicator (7) will light up.
• When the soleplate (13) reaches the desired tempera-
ture value, the indicator (7) will go out, you can start
cleaning.
• Switch the iron off setting the temperature control
knob (11) to the «MIN» position (SWITCHED OFF).
Remove the power plug from the mains socket.
• Position the iron above the sink horizontally and press
the self-clean button (8) «CLEAN» .
• Boiling water and steam with scale will be released
from the iron soleplate (13) openings.
• Slightly sway the iron back and forth until all the water
leaves the water tank (10).
• Release the continuous steam supply knob (3) and set
it to the position (15).
• Place the iron on its base (9) and let it cool down
completely.
• When the iron soleplate (13) cools down completely,
wipe it with a dry cloth.
• Before you take the iron away for storage, make sure
that there is no water in the water tank (10) and that
the iron soleplate (13) is completely dry.
AUTO SWITCH-OFF FUNCTION
• If the iron remains still for about 30 seconds in hori-
zontal position or for about 8 minutes in vertical posi-
tion, it will switch off automatically, and the indicator
(7) will be flashing. To switch the iron on again just
start ironing.
Note: - after switching the iron on the preset soleplate
temperature will be restored after some time depending
on the temperature control knob position.
CLEANING AND CARE
• Before cleaning the iron, make sure that it is unplugged
and has cooled down completely.
• Wipe the iron body with a slightly damp cloth and then
wipe it dry.
• Do not immerse the iron, the power cord and the
power plug into water or any other liquids.
• Scale on the iron soleplate can be removed with a
cloth soaked in vinegar.
• After removing scale, polish the iron soleplate surface
with a dry cloth.
• Do not use abrasives to clean the iron soleplate and
body.
• Avoid contact of the iron soleplate with sharp metal
objects.
STORAGE
• Set the temperature control knob (11) to the posi-
tion «MIN», and the continuous steam supply knob
(3) to the lower position (15) – continuous steam
supply is off. Remove the power plug from the
mains socket.
• Put the iron vertically and let it cool down completely.
• Open the water inlet lid (2), turn over the iron and drain
any remaining water from the water tank (10).
• Close the lid (2).
• You can wind the power cord around the iron base (9).
• Store the iron vertically in a dry cool place out of reach
of children and disabled persons.

Содержание

Похожие устройства

Скачать