Dreame Bot Robot Vacuum and Mop D9 Plus White [7/89] Reset wi fi
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Dreame Bot Robot Vacuum and Mop D9 Plus White [7/89] Reset wi fi

Dreame Bot Robot Vacuum and Mop D9 Plus White [7/89] Reset wi fi
8 9
ENEN
1. Remove the protective strips 3. Connect to a power outlet and start charging
2.
Install the side brush
Click
WithintheGood
Wi-FiRange
Putawaythepowercord
intothecordstorageslot
Preparation Before Use
Note:
• Keep the immediate area 1.5 m in front of the base and 0.5 m to its both sides
clear of objects.
• Make sure that no objects might block the signaling area.
Note: Install the side brush until it clicks into place.
Place the base on level ground against the wall and connect it to a power
outlet. Place the robot onto the base to charge. The robot will turn on
automatically and begin charging. It is recommended to fully charge your
robot before rst-time use.
About the Auto-Empty Base
Itisrecommendedthattherobotsetoutfromthebasebeforecleaning.Donot
movethebasewhiletherobotiscleaning.Thisensuresthattherobotreturnsto
basesmoothly.
Aftertherobotcompletesthecleaningtaskandautomaticallyreturnstothe
base,thebasewillstartauto-empty.MoresettingscanbeoperatedontheAPP.
> 0.3 m
> 0.5 m
> 0.5 m
> 1.5 m
Connecting with Dreamehome App
Open the Dreamehome App, tap " " in the upper right corner, and scan the
QR code above again to add "DreameBot D9 Plus". Please follow the prompts
to nish the Wi-Fi connection.
This product works with the Dreamehome App which can be used to
control your device.
1. Download the Dreamehome App
Scan the QR code on the robot, or search for "Dreamehome" in the app store to
download and install the app.
2.Add Device
Note:
• Only 2.4GHz Wi-Fi is supported.
• Due to upgrades in the app software, the actual operations may dier
from the directions in this manual. Please follow the instructions based on
the current app version.
3. Reset Wi-Fi
Simultaneously press and hold the and buttons until you hear a
voice prompt say, "Waiting for the network conguration." Once the Wi-Fi
indicator is blinking slowly, the Wi-Fi has been successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and
add the device again.
Wi-Fi Indicator
·
Blinking slowly: To be
connected
·
Blinking quickly: Connecting
·
On: Connected
QR Code

Содержание

Похожие устройства

Скачать