Brayer BR1114 [13/64] Removing mineral scale

Brayer BR1114 [13/64] Removing mineral scale
13
EN
REMOVING MINERAL SCALE
For e󰀨ective operation of the co󰀨ee maker we recommend
removing scale every 2-3 months and when using »hard”
water more often.
1. Make sure that the power plug is not inserted into the
mains socket.
2. Make sure that the steam supply is closed. To do this
turn the knob (9) «
» clockwise until bumping
«•».
3. Make citric acid solution: 2 teaspoons of acid to 1
litre of water and pour the solution into the water tank
(15). Install the tank (15) back to its place.
4. Insert one of the co󰀨ee lters (6) into the holder (5).
Do not put ground co󰀨ee into the lter (6).
5. Install the lter holder (5) into the co󰀨ee maker. The
holder (5) ledges should match the grooves on the
boiler «INSERT», after that turn the lter holder
handle (4) to the right until bumping «LOCK».
6. Place a suitable cup on the grid (2).
7. Insert the power plug into the mains socket.
8. Switch the co󰀨ee maker on by pressing the on/o󰀨
button (17) « », the button (17) illumination will
light up, when the buttons (18, 19, 20) illumination
lights up, it means preheating is completed.
9. Press the button (19) «
», depending on the
preset water supply time, press the button (19) «
» once or twice, ll a cup of approximately 100 ml
capacity with water (it is necessary to remove water
from the boiler and ll it with citric acid solution), if
necessary, switch the water supply o󰀨 by pressing the
button (19) «
» again. Pour the liquid out from the
cup.
10. Switch the water supply on by pressing the button (19)
«
» and ll a cup of about 100 ml capacity, press
the button (19) «
» again to switch the water supply
o󰀨 and pour the liquid out of the cup.
11. After a while repeat the procedure described in the
paragraph 10 and ll the cup of about 100 ml capacity
again.
12. Press the steam supply button (20) «
». Put a
suitable bowl under the tip (11) and slightly open
the steam supply by turning the knob (9) « »
counterclockwise. Carefully turn the knob (9) « »
to the maximal steam release position, release the
steam for about 1 minute, then close the steam by
turning the knob (9) « » clockwise until bumping
«•».
13. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨
button (17) « »,. Wait for 10-15 minutes.
14. Perform the steps 10 and 11 at least 3 times.
15. Repeat the cleaning procedure for the steam release
channels described in the paragraph 12.
16. With small intervals, repeat the boiler cleaning
procedure (paragraph 10) until the citric acid solution
dissolves in the tank (20) completely.
17. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨
button (17) « ».

Содержание

Похожие устройства