Brayer BR1114 [14/64] Cleaning the coffee maker
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR1114 [14/64] Cleaning the coffee maker

Brayer BR1114 [14/64] Cleaning the coffee maker
14
EN
• If necessary, wash the tray (1) and the grid (2) with
water and soft detergent, rinse and dry.
STORAGE
• Before taking the co󰀨ee maker away for long storage,
unplug it and let the unit cool down.
• Clean the co󰀨ee maker.
• Pack the co󰀨ee maker in the original package.
• Use and store the co󰀨ee maker at the temperature
above 0 °C.
• Keep the co󰀨ee maker in a dry cool place out of reach
of children and disabled persons.
TROUBLESHOOTING
Problem Cause Solution
Water leaks from
the bottom of the
co󰀨ee maker
The tray is full of
water.
Please, clean the tray.
The co󰀨ee
maker is
damaged.
Please, apply to the service
center for repairing the
co󰀨ee maker.
Water leaks from
the lter holder.
There is ground
co󰀨ee on the
lter.
Clean the lter edges from
ground co󰀨ee.
Ready co󰀨ee
has unpleasant
taste.
The co󰀨ee
maker was not
washed after
descaling.
Clean the co󰀨ee maker
from mineral scale and
wash it from the remaining
descaling agent.
Ground co󰀨ee
was stored in a
humid place for
a long time.
Please, use fresh ground
co󰀨ee. Keep unused
ground co󰀨ee in a hermetic
package in a dry cool place.
18. Fill the water tank (15) with clear water until maximal
level and repeat the steps 10, 12 at least 3 times
without the 10-15 minute break.
19. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨
button (17) « », the buttons (17, 18, 19, 20)
illumination will go out.
Note: to remove the scale you can use special descaling
agents for co󰀨ee makers and co󰀨ee machines, strictly
following the instructions on their usage.
CLEANING THE COFFEE MAKER
• If there is ground co󰀨ee scale remainin in the lter (6)
openings, clean the lter (6) with a small brush.
• Wipe the co󰀨ee maker body with a soft, slightly damp
cloth and then wipe the co󰀨ee maker body (12) dry.
Do not use abrasives and solvents to clean the co󰀨ee
maker body.
• Do not immerse the co󰀨ee maker body (12), the power
cord and the power plug into water or any other liquids.
• Wash the removable parts of the co󰀨ee maker with
warm water and neutral detergent, then rinse them and
dry.
DRIP TRAY
• A red pop-up indicator (3) in the grid (2) will show when
the tray (1) is full.
• Remove the grid (2) from the tray (1), remove the tray
(1) and pour out water, install the tray back to its place,
put the grid (2) on the tray (1).

Содержание

Похожие устройства

Скачать