Brayer BR1114 [7/64] Before using the coffee maker

Brayer BR1114 [7/64] Before using the coffee maker
7
EN
Transport the co󰀨ee maker in the original package.
Keep the unit out of reach of children and disabled
persons.
COFFEE MAKER IS INTENDED FOR HOUSEHOLD
USE ONLY, DO NOT USE THE COFFEE MAKER FOR
COMMERCIAL OR LABORATORY PURPOSES.
BEFORE USING THE COFFEE MAKER
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
Unpack the co󰀨ee maker and remove all the
packaging materials.
Keep the original package.
Read the safety measures and operating
recommendations.
Check the delivery set.
Examine the co󰀨ee maker for damages, in case of
damage do not plug it into the mains.
Make sure that the specications of power supply
voltage specied on the lower panel of the unit
correspond to the specications of your mains.
Wipe the co󰀨ee maker body (12) surface with a
clean, slightly damp cloth to remove dust, wipe the
co󰀨ee maker body (12) dry.
Make sure that the steam supply is closed. To do this
turn the knob (9) «
» clockwise until bumping
«•».
Before using the espresso machine for the rst time,
wash all removable parts (1, 2, 5, 6, 15, 16) with
warm water and neutral detergent, rinse and dry
them.
Remove the water tank (15), ll it with cold water up
to the MAX mark and install it back to its place.
Notes:
- to ll the water tank (15) with water you can open
the lid (14) and pour water into the tank (15).
- to carry the water tank (15), take it by the handle
(13).
Insert any co󰀨ee lter (6) into the holder (5) (do not
add ground co󰀨ee into the lter).
Install the lter holder (5) into the co󰀨ee maker. The
holder (5) ledges should match the grooves on the
boiler «INSERT», after that turn the lter holder
handle (4) to the right until bumping «LOCK».
Place a suitable cup on the grid (2).
Insert the power plug into the mains socket.
Switch the co󰀨ee maker on by pressing the on/o󰀨
button (17) «
», the button (17) illumination will
light up, when the buttons (18, 19, 20) illumination
will light up, this means that preheating is completed.
Notes:
- the rst switching on of the pump may be
accompanied by an uncharacteristic sound, this
is a normal. After lling the boiler with water, the
sound of the pump will return to normal.

Содержание

Похожие устройства