Brayer BR1114 [9/64] Making espresso
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR1114 [9/64] Making espresso

Brayer BR1114 [9/64] Making espresso
9
EN
light up, when the buttons (18, 19, 20) illumination
lights up, it means preheating is completed.
• Switch the water supply on by pressing the button
(19) «
», the pump will switch on for 30 seconds
and hot water will be poured into the cup. After
switching the pump o󰀨, pour the water out from the
cup.Preheating is over.
MAKING ESPRESSO
ATTENTION! When making co󰀨ee do not leave the
operating co󰀨ee maker unattended, as it is necessary to
watch the cup being lled with ready co󰀨ee!
AFTER PREHEATING:
• Make sure that the steam supply is closed. To do this
turn the knob (9) «
» clockwise until bumping
«•».
• Remove the lter holder (5) by turning the handle (4)
to the left «INSERT» and remove the lter holder (5).
• Put ground co󰀨ee in the small or large lter (6),
slightly tamp the ground co󰀨ee with the back side of
the measuring spoon (16).
• Install the lter holder (5) into the co󰀨ee maker. The
holder (5) ledges should match the grooves on the
boiler «INSERT», after that turn the lter holder
handle (4) to the right until bumping «LOCK».
• Wait until the buttons (18, 19, 20) illumination lights
up, the co󰀨ee maker is ready for making co󰀨ee.
• If you use a small lter (6), switch the water supply
on by pressing the button (18) « » to prepare one
cup of co󰀨ee, the pump will switch on and work for 15
seconds, the pump operation time of 15 seconds is set
by default.
• To prepare two cups of co󰀨ee, use a large lter (6) and
press the button (19) «
», the pump will switch on
and work for 30 seconds, the pump operation time of 30
seconds is set by default.
Note: - watch the cup lling with the ready co󰀨ee, if you
need t switch the water supply o󰀨, press again the button
(18) «
» or the button (19) « ».
• Switch the espresso machine o󰀨 by pressing the on/
o󰀨 button (17) «
», the buttons (17, 18, 19, 20)
illumination will go out.
• Wait until the co󰀨ee maker cools down and remove
the lter holder (5) by turning the handle (4) to the left
«INSERT». Remove the ground co󰀨ee remnants and
wash the lter (6).
• For easy removing of the co󰀨ee remnants use the
retainer on the handle (4) to prevent the lter (6) from
falling o󰀨 the holder (5).
• Notes:
- the cups should be preliminary heated up, when
water heats up in the boiler, put the cups on the tray
(8).
- if you need to promptly remove the lter holder (5),
you have to reduce the pressure in the boiler, switch
the co󰀨ee maker o󰀨 by pressing the on/o󰀨 button
(17) « », place a suitable cup under the tip
(11) and slightly open the steam supply by turning
the knob (9) « » counterclockwise. After the

Содержание

Похожие устройства

Скачать