Brayer BR1114 [8/64] How to make a good espresso
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR1114 [8/64] How to make a good espresso

Brayer BR1114 [8/64] Auto switch off function
8
EN
• Wait until the buttons (18, 19, 20) illumination lights up,
then switch the water supply on by pressing the button
(19) «
», the pump will switch on for 30 seconds,
drain the water from the cup and again press the button
(19) «
» to switch the water supply on again. After
switching the pump o󰀨, drain the water from the cup.
• Repeat this procedure several times, the boiler will be
clean after that.
• To switch the espresso machine o󰀨, press the on/
o󰀨 button (17) « », the buttons (17, 18, 19, 20)
illumination will go out.
ATTENTION!
• Do not remove the lter holder (5) during espresso
machine operation.
• Do not remove the lter holder (5) immediately after
preparing co󰀨ee as there is redundant water and steam
pressure inside the lter (5), let the co󰀨ee maker cool
down completely.
• To remove the lter holder (5) turn the handle (4) to the
left «INSERT» and remove the lter holder (5).
AUTO SWITCH OFF FUNCTION
• If no actions were performed during 25 minutes
after switching on, the co󰀨ee maker will switch o󰀨
automatically.
HOW TO MAKE A GOOD ESPRESSO
• Use ground co󰀨ee for espresso co󰀨ee makers.
• Slightly tamp the ground co󰀨ee in the lter (6), you
can do it with the back side of the measuring spoon
(17).
• Co󰀨ee strength depends on the quality and grinding
degree of co󰀨ee beans. If co󰀨ee is pouring out too
long, this means the co󰀨ee powder is too ne or it is
tamped too strongly.
PREHEATING
• To make a cup of hot espresso, it is recommended to
preliminary heat up the co󰀨ee lter (6) and the lter
holder (5).
• Open the lid (14) and ll the tank (15) with water, or
remove the tank (15) and ll it with water, then install
the tank (15) back to its place.
• Insert one of the co󰀨ee lters (6) into the holder (5).
Notes:
- use the small lter (6) to make one cup of co󰀨ee
and press one cup button (18) «
»;
- use the big lter (6) to make two cups of co󰀨ee
and press two cups button (19) «
».
• Install the lter holder (5) into the co󰀨ee maker. The
holder (5) ledges should match the grooves on the
boiler «INSERT », after that turn the lter holder
handle (4) to the right until bumping «LOCK».
• Place a suitable cup on the grid (2).
• Insert the power plug into the mains socket.
• Switch the co󰀨ee maker on by pressing the on/o󰀨
button (17) « », the button (17) illumination will

Содержание

Похожие устройства

Скачать