Brayer BR1114 [10/64] Making cappuccino

Brayer BR1114 [10/64] Making cappuccino
10
EN
pressure in the boiler is released, you can remove
the lter holder (5).
ESPRESSO PORTION SETTING
- To enter the programming mode, press and hold
the one cup button (18) « » for 3 seconds, the
button (18) « » illumination will be ashing.
Press the button (18) « » again. After the
required amount of ready co󰀨ee is poured into the
cup, press the button (18) « » again to nish
setting. Maximum time of water supply for making
one cup of co󰀨ee is 45 seconds.
- To enter the programming mode, press and hold
the two cups button (19) «
» for 3 seconds,
the button (19) «
» illumination will be
ashing. Press the button (19) «
» again. After
the required amount of ready co󰀨ee is poured into
the cup, press the button (19) «
» again to
nish setting. Maximum time of water supply for
making two cups of co󰀨ee is 90 seconds.
Notes:
- if you have programmed the water supply time
for making one cup of co󰀨ee, then the water
supply time for making two cups of co󰀨ee will be
automatically set doubled;
- water supply time for two cups of co󰀨ee can be set
up to 90 seconds. If the water supply time for two
cups of co󰀨ee was set, then the water supply time
for making one cup of co󰀨ee will be automatically
set as half the time for making two cups of co󰀨ee.
RETURN TO THE FACTORY SETTINGS
Switch the co󰀨ee maker on and wait for preheating, the
button (18, 19, 20) indicators will light up.
After the preheating is nished, press and hold
simultaneously the buttons (20) «
» and (19) «
» for 3 seconds, the buttons (19 and 20) illumination will
ash 3 times, and the espresso machine will return to the
factory settings.
Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨 button
(17) « », the buttons (17, 18, 19, 20) illumination will
go out.
Switch the co󰀨ee maker on by pressing the on/o󰀨 button
(17) « », the settings will return to default.
MAKING CAPPUCCINO
ATTENTION!
Be careful to avoid burns by the released hot steam.
Make co󰀨ee, as described in the chapter «MAKING
ESPRESSO», in a cup with enough capacity to add
frothed milk.
Make sure that the steam control knob (9) «
» is in
the position «the steam supply is o󰀨 «•».
Press the steam supply button (19) «
» and wait until
the button (20) «
» illumination glows constantly. Place
any suitable bowl under the tip (11) for water. Carefully
turn the steam supply knob (9) « » counterclockwise
for a quarter of a turn to remove the condensed uid from
the cappuccinator pipe (10).

Содержание

Похожие устройства