Brayer BR1114 [12/64] Hot water and its usage
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR1114 [12/64] Hot water and its usage

Brayer BR1114 [12/64] Hot water and its usage
12
EN
- Wait until the co󰀨ee maker cools down and remove
the tip (11) from the cappuccinator pipe (10), wipe
the outer side of the cappuccinator pipe (10) with a
soft damp cloth and wash the tip (11) under a water
jet.
Note: after frothing milk, if you press the water supply
button (18) «
» or the button (20) « », and
the button (18) «
», (20) « » and (19) «
» illumination will be ashing quickly, the pump will
not switch on, because the water temperature in the
boiler is high. To decrease the water temperature,
place a cup under the tip (11), turn the knob (9) « »
counterclockwise and drain hot water. When the buttons
(18, 19, 20) illumination glows constantly, the pump will
stop operating, turn the knob (9) « » to the position
«•». After that you can continue making co󰀨ee.
HOT WATER AND ITS USAGE
• You can use hot water for warming the cups before
making co󰀨ee or, for instance, for brewing tea.
• Drain hot water to decrease the boiler temperature after
frothing the milk.
• Switch the co󰀨ee maker on and wait for the co󰀨ee
maker to preheat, the buttons (18, 19, 20) illumination
will light up.
• Place a cup under the tip (11), carefully turn the steam
supply control knob (9) « » counterclockwise a
quarter of a turn or more, switch the water supply on
by pressing the button (19) «
», hot water will ow
into the cup.
• Switch the water supply o󰀨 by pressing the button (19) «
», turn the steam supply control knob (9) « »
clockwise to the position «•» to stop the hot water supply.
Notes:
- if you need to stop the water supply, press the button
(19) «
» again;
- you can set up the pump operation time (see the
chapter «ESPRESSO PORTION SETTING»).
WARMING THE DRINKS
You can warm up your drinks by putting the cappuccinator
pipe (10) without the tip (11) into the cup with the drink.
• Switch the co󰀨ee maker on and wait for the co󰀨ee maker
to preheat, the buttons (18, 19, 20) illumination will light
up.
• Press the steam supply button (20) «
».
• Put the cappuccinator pipe (10) without the tip (11) into
the cup with the drink you want to warm up. Carefully
turn the steam supply control knob (9) « »
counterclockwise.
• Close the steam supply by turning the knob (15) «
» clockwise until bumping «•».
• Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨 button
(17) « », the buttons (17, 18, 19, 20) illumination
will go out.
Note: some water or steam may appear from the lter
holder (5), it is normal.

Содержание

Похожие устройства

Скачать