Coolfort CF-3203 [8/44] English

Coolfort CF-3203 [8/44] English
8
ENGLISH
neously press the front bumper and press the on/off button
(1) (Fig. 21) and hold for 3 seconds. After this time, release
the button and the bumper, after which the Wi-Fi indicator
(2) will start flashing blue frequently and the robot will say
«Please connect to the network following the instructions».
To add the robot vacuum cleaner to the Coolfort mobile app,
follow the additional instructions included in the package.
CLEANING AND MAINTENANCE
Cleaning the roller brush (9)
Press down on the rotating latches of the brush holder
frame and remove it (Fig. 20).
Lift the left side of the brush (9) and remove it. Remove
debris, hair, thread, etc. from the brush. Wipe the suc-
tion nozzle (11) with a cloth.
Cleaning the side brushes (5)
Pull the side brushes (5) by the leash, remove and wipe. With
a slightly damp cloth, wipe off dust from the places where the
brushes are installed. Install the brushes (5) back to its place.
Cleaning the dust bin (10)
Open the dust bin (10) and free it from debris (Fig. 15).
Disassemble the dust bin (10) as described in the Vacuum
cleaner assembly section (Fig. 18). Rinse and dry the filter
sponge (21) and HEPA filter (22). Rinse and dry the tank (27)
(Fig. 16 and 17).
Cleaning the main parts
•
Clean the sensors and the glass surfaces of the vacuum
cleaner with a damp cloth.
•
Turn the vacuum cleaner over and clean the front wheel
(4) of any dust and hair that has become entangled on it.
•
Clean the charging contacts (6) of the vacuum cleaner
with a dry cloth
•
Do not immerse the vacuum cleaner body, power supply
(16), power supply connection cord and dock-station
(14) in water or any other liquid. Provide that no liquid
gets inside the vacuum cleaner body.
•
Do not use solvents or abrasives to clean the vacuum
cleaner body, dock-station (14) and power supply (16).
STORAGE
•
Clean the vacuum cleaner, in accordance with the
CLEANING AND MAINTENANCE section before pro-
longed periods of storage.
•
Remove the batteries from the remote control.
•
Use the original package for storage.
•
Keep the vacuum cleaner in a dry cool place out of reach
of children and disabled persons.
Information about malfunctions of the vacuum cleaner
The vacuum cleaner will report malfunctions and problems that have arisen with sound and light signals.
Malfunction Possible problems Solution
Battery is not charging The vacuum cleaner is not correctly installed
on the dock-station
Make sure the battery charging contact points
on the vacuum cleaner body and dock-station
are clean. Wipe down the contact points if
necessary. Move the vacuum cleaner body
slightly with your hands to ensure better con-
tact with the dock-station.
The dock-station power supply is unplugged Connect the dock-station and plug the power
supply.
The vacuum cleaner
gives sound signals,
periodically switches on
and off
It is possible that foreign objects (wires,
threads, hanging curtains, etc.) have been
wound onto the driving wheels of the vacuum
cleaner.
Remove foreign objects from the driving
wheels and the floor.
The vacuum cleaner fin-
ishes cleaning ahead of
time and spontaneously
returns to the charging
station
If the battery is too low to clean the room, the
vacuum cleaner automatically returns to the
charging station
It is normal.
Do not interfere with the operation of the
vacuum cleaner.
The operation time of the vacuum cleaner
depends on the cleaning area, floor surface,
room configuration and the selected cleaning
mode
The vacuum cleaner
does not switch on in
the scheduled operation
mode
The vacuum cleaner is switched off Switch the vacuum cleaner on by pressing and
holding the start/stop button.
The vacuum cleaner battery is empty Always leave the vacuum cleaner on the dock-
station if you are going to use the scheduled
operation mode.
The vacuum cleaner
does not respond to the
remote control
The battery of the remote control has run out
and needs to be replaced
Remove the battery holder from the remote
control, remove the old battery, install the new
one, observing the correct polarity, and insert
the holder into the remote control.
The vacuum cleaner is switched off or the
vacuum cleaner’s battery is discharged
Make sure the battery is fully charged and the
vacuum cleaner is switched on.
The radiator of the remote control or the
receiver of the robot vacuum cleaner is dirty
Clean the dirt on the radiator of the remote
control or the receiver of the robot vacuum
cleaner.
Nearby there are infrared rays that interfere
with signal transmission
Avoid using the remote control in an infrared
environment.

Содержание

Скачать