Zalman RESERATOR 1 [20/22] Www zalman co kr www zalmanusa com

RESERATOR 1

www.zalman.co.kr www.zalmanusa.com

8. FAQ

8.1 When the Coolant isn’t Circulating

(1) Check that the water pump is connected to the power.

(2) Verify that the pump is properly functioning. Remove the Reserator’s sink cover and

look inside to see if there is movement in the coolant. If there is none, contact the

distributor where you purchased the product.

(3) Make sure that the Reserator is installed correctly. It must be placed at the same level

as the PC, or slightly higher.

(4) Check if the coolant is flowing in the right direction.

(5) Inspect for any twists or folds in the silicone tubes of the system.

(6) Durning initial operation, the coolant may not properly circulate due to internal air

pressure. In this case, repeatedly turn the water pump on and off at a 10-second

interval and shake the silicone tubes to help get the air bubbles out. Once they are out

of the system the coolant should be circulating properly.

8.2 When There is a Leak at a Compression Fitting or Universal

Fitting Socket

(1) Turn off the system.

(2) Make sure the silicone tube is pushed all the way into the end of the Fitting Socket.

(3) Check to see that the tube is cut cleanly and squarely.

(4) Verify that the Fitting Cap has been screwed all the way into the end of the fitting Socket.