Yamaha DRAG STAR XVS650 (1997) [118/360] Cylinder heads

Содержание

Похожие устройства

CYLINDER HEADS ENG CYLINDER HEAD REMOVAL Rear cylinder head I AIign T mark with the stationary pointer Removal steps Temporarily install the AC magneto cover without the pickup coil and stator coil Turn the crankshaft clockwise Align the T mark a with the stationary pointer on the crankcase cover left when the rear piston is at TDC on the compression stroke When the T mark is aligned with the stationary pointer the punch mark on the camshaft sprocket should be aligned with the stationary pointer on the cylin der head The rear piston is at TDC on the compres sion stroke when there is clearance at both of the rocker arms If there is no clearance then turn the crankshaft clock wise one full turn Check that the rear piston is at TDC in the compression stroke 2 Loosen Bolt camshaft sprocket NOTE ________________________________ Use the sheave holder to hold the rotor Sheave holder YS 01880 90890 01701 3 Loosen Cap bolt timing chain tensioner 4 Remove Timing chain tensioner Gasket 5 Remove Bolt camshaft sprocket Camshaft sprocket plate only rear Camshaft sprocket NOTE __ ______________________________ To prevent the timing chain from falling into the crankcase fasten a wire to it 4 11

Скачать