Yamaha DRAG STAR XVS650 (1997) [170/360] Crankshaft and connecting rods

Содержание

Похожие устройства

CRANKSHAFT AND CONNECTING RODS ENG 5 Install Connecting rod cap NOTE ________________________________ Be sure that the characters on the side of the cap and connecting rod are aligned 6 Tighten Nuts connecting rod cap X 36 Nm 3 6 m kg 26 0 ft lb NOTE ________________________________ Apply molybdenum disulfide grease to the rod cap bolt threads and nut surfaces CAUTION _________________________ When tightening the nuts be sure to use an F type torque wrench Without pausing tighten to full torque specification Apply continuous torque between 3 0 and 3 6 m kg Once you reach 3 0 m kg DO NOT STOP TIGHTEN ING until final torque is reached If the tightening is interrupted between 3 0 and 3 6 m kg loosen the nut to less than 3 0 m kg and start again 7 Install Crankshaft NOTE ________________________________ Align the left connecting rod with the rear cylinder sleeve hole CRANKCASE ASSEMBLY 1 Apply Engine oil onto the main journal bearings Sealant onto the crankcase mating surfaces Yamaha Bond No 1215 ACC 1100 15 01 90890 85505 4 63

Скачать