Yamaha DRAG STAR XVS650 (1997) [179/360] Middle gear

Содержание

Похожие устройства

MIDDLE GEAR ENG MIDDLE DRIVEN PINION GEAR REMOVAL 1 Remove Universal joint Disassembly steps Remove the circlips Place the universal joint in a press Using a suitable diameter pipe beneath the yoke press the bearing into the pipe as shown NOTE ________________________________ It may be necessary to lightly tap the yoke with a punch Repeat the steps for the opposite bearing Remove the yoke 2 Loosen Nut middle driven shaft NOTE ________________________________ Use the universal joint holder to hold the yoke 3 Universal joint holder YM 04062 90890 04062 3 Remove Bearing housing assembly Removal steps Clean the outside of the middle driven shaft Place the middle driven shaft assembly onto a hydraulic press CAUTION _________________________ Never directly press the shaft end with a hydraulic press this will result in damage to the shaft thread Install the suitable socket on the shaft end to protect the thread from damage NOTE ________________________________ When the middle driven shaft is removed from the bearing housing assembly always replace the bearing Press the shaft end and remove the bear ing housing 4 72

Скачать