Yamaha DRAG STAR XVS650 (1997) [188/360] Middle gear

Содержание

Похожие устройства

MIDDLE GEAR ENG 6 Tighten Bolts driven gear bearing housing IV 25 Nm 2 5 m kg 18 1 ft lb NOTE ________________________________ Tighten the bolts carefully one thread turn at a time only Push in the bearing housing and tighten the bearing housing bolts CAUTION _________________________ Do not overtighten the bearing housing bolts or you may obtain too little gear backlash and cause damage to the gears If over tightened loosen the three bolts so that the crankcase bearing housing clear ance is about 2 mm and repeat all previous steps 7 Repeat steps 4 and 5 until the correct gear backlash is achieved Backlash gear 0 05 0 10 mm 0 002 0 004 in 8 Measure Crankcase bearing housing clearance Use a feeler gauge 9 Select Shim s Selection steps For example the clearance between the crankcase and the bearing housing is 0 46 mm 0 018 in The shim can only be selected in 0 05 mm 0 001 in increments round off the hun dredths digit and select the appropriate shim s Hundredths 0 1 2 3 4 5 6 7 8 9 4 81 Rounded value 0 5 10

Скачать