Bomann KK 2234, 26 л [31/46] Electric installation

Bomann KK 2234 CB [31/46] Electric installation
31
8 Glass door
9 Heating element
10 Baking tray
11 Grilling grid
12 Crumb tray
Unpacking the device
Unpack the device.
Remove all packaging materials such as
foils, lling material, cable ties and cardboard
packaging.
Check the scope of delivery.
Note:
There might be particles or production
remains on the device. We recommend you
wipe the enclosure with a damp cloth.
Electric installation
Be sure the voltage of the device (rating plate)
is in accordance with the mains voltage.
Connect the mains plug to a properly installed
shockproof socket (230V~ 50Hz) only.
a OFF
b Top heat
c Bottom heat
d Top and bottom heat
e Top and bottom heat together with big boiling
plate 900W
f Big boiling plate 850W
g Big boiling plate 1100W
h Big boiling plate 1500W
i Small boiling plate
Connected load
The device is intended for a maximum power
intake of 3320 W. This connected load recom-
mends a separate input lead secured with a 16
amp protected switch.
Caution Overload:
When using extension cords, these should
have a cable cross-section of at least 1.5
mm².
Do not use gang plugs, because the device
is too powerful.
Notes on operation
Imagery on switch 4 and 5
Switch
Use the following switches to operate both boil-
ing plates and the oven:
Control switch 3 Oven temperature
Select an oven temperature.
Note:
You may turn on/off the oven function with
switch 4 only.
Switch 4 Oven/Boiling plate, big
Select performance 850W, 1100W or 1500W
of the big boiling plate without oven function
(symbols f, g, h).
Select an oven function (symbols b, c, d).
Use control switch 3 to furthermore set the
temperature.
Select operation of big boiling plate with 900 W
in combination with the oven (symbol e).
Select position “OFF” to turn off all settings.
Switch 5 (symbol i) Boiling plate, small
Select a setting of the small boiling plate
between 1 and 6.
Note:
You may use the small boiling plate and the
oven simultaneously without any distur-
bance.
Select position “0” to turn off all settings.
Control light
As soon as you connect the device to the mains
and select a function, the control light turns on.
Operating the boiling plates
Leave the boiling plates turned on for 5 min-
utes before initial use, in order to remove the
protective lm.
In this connection there might be a slight
formation of smoke and odor, which will vanish
during the course of operation.
Ensure sufcient ventilation.
Cookware
Only use cooking pots with a at footing in
order to optimize the use of energy.
The pot should never be smaller than the boil-
ing plate. This would cause a loss of energy. In
the worst case the boiling plate might become
distorted.

Содержание

Похожие устройства

Скачать