Zyxel ZyWALL USG 2000 [107/150] Before you start

Chapter 5 Managing Traffic

ZyWALL USG 20-2000 User’s Guide

107

5.4.2 Before You Start

ZyWALL A should already be configured. You will use device HA to copy ZyWALL A’s settings to B

later (in Section 5.4.4 on page 108). To avoid an IP address conflict, do not connect ZyWALL B to

the LAN subnet until after you configure its device HA settings and the instructions tell you to

deploy it (in Section 5.4.5 on page 110).

5.4.3 Configure Device HA on the Master ZyWALL

1 Log into ZyWALL A (the master) and click Configuration > Device HA > Active-Passive Mode.

Double-click the LAN interface’s entry.

2 Configure 192.168.1.3 as the Manage IP and 255.255.255.0 as the Manage IP Subnet Mask.

Click OK.

3 Set the Device Role to Master. This example focuses on the connection from the LAN to the

Internet through the WAN interface, so select the LAN and WAN interfaces and click Activate. Enter

a Synchronization Password (“mySyncPassword” in this example). Retype the password and

click Apply.