Zyxel ZyWALL USG 2000 [30/150] Configure a wan ethernet interface

Chapter 2 How to Set Up Your Network

ZyWALL USG 20-2000 User’s Guide

•The wan1 interface uses a static IP address of 1.2.3.4.

•Add P5 (lan2) to the DMZ interface (Note: In USG 20/20W, use P4 (lan2) instead of P5 in this

example). The DMZ interface is used for a protected local network. It uses IP address

192.168.3.1 and serves as a DHCP server by default.

• You want to be able to apply specific security settings for the VPN tunnel created by the Quick

Setup - VPN Setup wizard (named WIZ_VPN). So you create a new zone and add WIZ_VPN

to it.

Figure 21 Ethernet Interface, Port Roles, and Zone Configuration Example

2.2.1 Configure a WAN Ethernet Interface

You need to assign the ZyWALL’s wan1 interface a static IP address of 1.2.3.4.

Click Configuration > Network > Interface > Ethernet and double-click the wan1 interface’s

entry in the Configuration section. Select Use Fixed IP Address and configure the IP address,

subnet mask, and default gateway settings and click OK.