Kenwood sjm 023 [3/66] Care and cleaning
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kenwood sjm 023 [3/66] Care and cleaning

Kenwood 0WSJM020A2 [3/66] Care and cleaning
to use your kettle
1 Fill the kettle through either the
spout or lid. The water level must be
between ‘MAX’ and ‘MIN’.
●
Be economical: do not boil more
water than you need.
●
To improve the quality of your drinks
always use fresh water.
●
Empty the kettle after each use.
2 Check the lid is closed. Close the lid
by pushing down on the finger pad
area .
3 Plug in and switch on.
4Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
●
If you experience problems
with your kettle switching on
and off during use or
switching off before boiling,
check that the flat element is
free from scale - see
“descaling”.
●
Your kettle is fitted with a filter to
hold back limescale particles.
●
If you find drops of water under your
kettle, don’t worry - it is just
condensation.
boil-dry protection
●
If you switch on with too little water,
your kettle will cut out automatically.
Switch off, remove from the
powerbase and let it cool down
before re-filling. When it has cooled
down, the switch will reset itself.
care and cleaning
●
Before cleaning, unplug your kettle
and let it cool down.
the outside and powerbase
●
Wipe with a damp cloth, then dry.
Do not use abrasives - they will
scratch the metal and plastic
surfaces.
the inside
●
Even though your kettle comes with
a filter, you still need to clean the
inside (and the filter) regularly.
the filter
1 Open the lid.
2 Slide the filter out .
3 either rinse under the tap or use a
soft brush.
or when descaling your kettle, drop
the filter in too. Rinse thoroughly.
4 Slide the filter back in to refit .
descaling
●
Regular descaling of the flat element
will improve the performance of your
kettle. If the kettle is not descaled
regularly the build up of limescale
may result in the following:
●
problems may be experienced
with the kettle switching on and
off during use or switching off
before boiling.
●
the kettle may take longer to boil.
●
the flat element may be damaged.
Please note: Failure to descale your
kettle may invalidate your guarantee.
●
When limescale starts to build up on
the heating element, buy a suitable
descaler and descale your kettle.
After descaling, boil with fresh water
several times and discard. Clean any
descaler off the kettle - it can
damage the parts.
●
Some regions of the country have
chalky water. This makes boiled
water look cloudy and leaves a
deposit on the side of the kettle. This
is normal but can be removed with
regular cleaning.
●
Alternatively, to reduce limescale
build up, use filtered water to fill your
kettle.
3

Содержание

Похожие устройства

the inside Even though your kettle comes with a filter you still need to clean the inside and the filter regularly to use your kettle 1 Fill the kettle through either the spout or lid The water level must be between MAX and MIN Be economical do not boil more water than you need To improve the quality of your drinks always use fresh water Empty the kettle after each use 2 Check the lid is closed Close the lid by pushing down on the finger pad area 3 Plug in and switch on 4 Your kettle will boil and switch off automatically To re boil wait a few seconds the on off switch needs time to reset If you experience problems with your kettle switching on the filter 1 Open the lid 2 Slide the filter out 3 either rinse under the tap or use a soft brush or when descaling your kettle drop the filter in too Rinse thoroughly 4 Slide the filter back in to refit 0 descaling Regular descaling of the flat element will improve the performance of your kettle If the kettle is not descaled regularly the build up of limescale may result in the following problems may be experienced with the kettle switching on and off during use or switching off before boiling the kettle may take longer to boil the flat element may be damaged and off during use or switching off before boiling check that the flat element is free from scale see descaling Your kettle is fitted with a filter to hold back limescale particles If you find drops of water under your kettle don t worry it is just condensation Please note Failure to descale your kettle may invalidate your guarantee When limescale starts to build up on the heating element buy a suitable descaler and descale your kettle After descaling boil with fresh water several times and discard Clean any descaler off the kettle it can damage the parts Some regions of the country have chalky water This makes boiled water look cloudy and leaves a deposit on the side of the kettle This is normal but can be removed with regular cleaning Alternatively to reduce limescale build up use filtered water to fill your kettle boil dry protection If you switch on with too little water your kettle will cut out automatically Switch off remove from the powerbase and let it cool down before re filling When it has cooled down the switch will reset itself care and cleaning Before cleaning unplug your kettle and let it cool down the outside and powerbase Wipe with a damp cloth then dry Do not use abrasives they will scratch the metal and plastic surfaces 3

Скачать