Aquael AQUAJET PFN 10000 PLUS [11/54] English

b2) the side wings (J) of the plug fit into indentations on the bottom ledge of the back

cover (10) /the small indentations have to be cleaned!/;

c) locating the ensemble (10 and 11) back, the claws (L) of the back cover on the bottom of

pump stand should be pushed in first (see arrows “III” on the figure 4).

The pump is powered by a water-proof, asynchronous engine that does not require any

maintenance. If because of using the pump without a filter (or loosing the cord plug (11))

the pump will get clogged with leaves, big stones or other impurities and will get blocked

the impeller and its chamber have to be cleaned. In order to do that, the following

steps should be taken: unscrew the screws (4), remove impeller chamber (2), unscrew the

screws securing the impeller (5), take the complete impeller out (6) and remove the gasket

(7). Do not use any hard tools to clean the removed elements, never scrub! The cleaning

should be exercised under a stream of flowing water or in lukewarm water possibly us-

ing gentle cleaning agent. Use only sponge or soft brush. Several comments for cleaning

individual elements:

a) Impeller chamber (2). Particularly carefully clean the threads of intake and outlet and the

internal cylindrical surface that will compress the gasket (7);11

b) Pump body (8). It must not be disassembled. In case of hard deposits a gentle scale

removal agent can be used. After completing the cleaning the device should necessarily

be washed in clean water. Particularly carefully clean the sleeve of the axle and the surface

“F” for the gasket (see fig. 1);

c) Complete impeller (6). It must not be disassembled. It should only be cleaned under

a stream of running water.

d) Gasket (7). After cleaning it place it back in its place (surface “F” on fig. 1) and lubricate

lightly with Vaseline.

The pump should now be assembled in reverse order.

DISSASEMBLY AND DISPOSAL

It is forbidden to dispose of used electric and electrical equipment in a trash bin. Segregat-

ing and proper utilization of this kind of waste leads to conserving the resources of natural

environment and allows avoiding negative influence on health as it can be endangered

by improper waste handling. The user is responsible for delivering the used product to

a specialized collection point where it will be accepted free of charge. You can obtain

information about such a facility at the local authorities, or by asking either the seller or

the manufacturer service.

WARRANTY CONDITIONS

The manufacturer grants a 24 month guarantee beginning on the date of purchase. The

guarantee covers defects arising from manufacturer fault i.e. defective materials or as-

sembly errors. It does not cover damage caused by improper handling or construction

changes introduced by the user. In order to perform repair send the device with filled out

warranty card to the manufacturer or distributor address. The conformity of production

date from the warranty card with the one of pump base is a condition for warranty rec-

ognition. The following warranty conditions do not exclude, limit or suspend user’s rights

derived from discrepancy of the merchandise with the agreement.

ENGLISH