Philips Avent scf870/22 — essential Cleaning and Maintenance Tips for Kitchen Appliances [14/156]

Превью страниц Страница 14 / 156

Cleaning and maintenance

Clean the appliance after every use.

Never immerse the motor unit in water.

Never use bleach or chemical sterilising solutions/tablets in the appliance.

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol, acetone or

alcohol to clean the appliance.

1 Unplug the appliance and remove the jar from the motor unit (Fig. 19).

2 Remove the lid from the jar and turn the lid upside down (Fig. 20).

3 Remove the sieve and the valve from the lid. (Fig. 21)

4 Clean the valve in hot water with some washing-up liquid and rinse it under the tap.

5 Remove the blade unit from the jar (Fig. 22).

6 Clean the blade unit under the tap thoroughly, immediately after use. Make sure you also

rinse the inside of the tube of the blade unit (Fig. 23).

Handle the blade unit very carefully. The cutting edges are very sharp.

Note: If you want to clean the blade unit more thoroughly, you can also place it in the dishwasher after

you have rinsed it.

7 Clean the other parts that have come into contact with food in hot water with some

washing-up liquid immediately after use.

Note: All parts, except the motor unit, can also be cleaned in the dishwasher.

8 If necessary, clean the motor unit with a moist cloth.

9 Check if any food particles have entered the water tank. You can do this by looking into the

lling opening to see if there are any food particles in it or by checking if the water has an

unusual colour and by smelling if the water tank produces an unpleasant or a burnt smell.

If this is the case, clean the water tank (see section ‘Cleaning the water tank’ in this chapter).

10 Leave the lid of the lling opening open to prevent bacterial growth.

Descaling the water tank

If food particles enter the water tank, they may get stuck to the heating element in the water tank

during the next steaming processes. These particles cannot be removed by just rinsing the water

tank.

In addition, you have to descale the appliance every four weeks to ensure it continues to work

100% effectively. To reduce scale build-up, it is helpful to use pre-boiled or ltered water in the

appliance.

To remove food particles inside the water tank and to descale the appliance, follow the descaling

instructions below.

1 Make sure the appliance is switched off.

2 Add one sachet of citric acid (10g) to 200ml of warm water.

Note: You can also use a solution of 150ml water and 50ml white vinegar (8% acetic acid).

3 Fill the water tank with the solution of citric acid (or vinegar) and water.

4 Close the lid of the lling opening.

ENGLISH14