Pioneer GM-7200M [3/85] English

Pioneer GM-7200M [3/85] English
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
êìëëäàâ
2
Thank you for purchasing this PIONEER
product. Before attempting operation, be
sure to read this manual.
In case of trouble
When the unit does not operate properly,
contact your dealer or the nearest autho-
rized PIONEER Service Station.
About This Product
This product is an amplifier for the sub-
woofer. If both L (left) and R (right) chan-
nels are connected to the RCA input of
this product, output is mixed because this
product is a mono amplifier.
CAUTION
Never replace the fuse with one of greater
value or rating than the original fuse. Use
of an improper fuse could result in over-
heating and smoke and could cause dam-
age to the product and injury including
burns.
WARNING
Always use the special red battery and ground
wire [RD-223], which is sold separately. Connect
the battery wire directly to the car battery positive
terminal (+) and the ground wire to the car body.
Do not touch the amplifier with wet hands.
Otherwise you may get an electric shock. Also,
do not touch the amplifier when it is wet.
For traffic safety and to maintain safe driving
conditions, keep the volume low enough so that
you can still hear normal traffic sound.
Check the connections of the power supply and
subwoofer if the fuse of the separately sold bat-
tery wire or the amplifier fuse blows. Detect the
cause and solve the problem, then replace the
fuse with another one of the same size and rating.
To prevent malfunction of the amplifier and sub-
woofer, the protective circuit will cut the power
supply to the amplifier (sound will stop) when an
abnormal condition occurs. In such a case, switch
the power to the system OFF and check the
connection of the power supply and subwoofer.
Detect the cause and solve the problem.
Contact the dealer if you cannot detect the cause.
To prevent an electric shock or short-circuit
during connection and installation, be sure to
disconnect the negative (–) terminal of the battery
beforehand.
Confirm that no parts are behind the panel when
drilling a hole for installation of the amplifier. Be
sure to protect all cables and important equipment
such as fuel lines, brake lines and the electrical
wiring from damage.
DO NOT allow amplifier to come into contact
with liquids due to, for example, the location
where the amplifier is installed. Electrical shock
could result. Also, amplifier and speaker damage,
smoke, and overheating could result from contact
with liquids. In addition, the amplifier surface
and the surface of any attached speakers could
become hot to the touch and minor burns could
result.

Содержание

Похожие устройства

In case of trouble When the unit does not operate properly contact your dealer or the nearest autho rized PIONEER Service Station About This Product_________________ This product is an amplifier for the sub woofer If both L left and R right chan nels are connected to the RCA input of this product output is mixed because this product is a mono amplifier A CAUTION_______________________ Never replace the fuse with one of greater value or rating than the original fuse Use of an improper fuse could result in over heating and smoke and could cause dam age to the product and injury including burns ENGLISH Thank you for purchasing this PIONEER product Before attempting operation be sure to read this manual WARNING Always use the special red battery and ground wire RD 223 which is sold separately Connect the battery wire directly to the car battery positive terminal and the ground wire to the car body Do not touch the amplifier with wet hands Otherwise you may get an electric shock Also do not touch the amplifier when it is wet For traffic safety and to maintain safe driving conditions keep the volume low enough so that you can still hear normal traffic sound Check the connections of the power supply and subwoofer if the fuse of the separately sold bat tery wire or the amplifier fuse blows Detect the cause and solve the problem then replace the fuse with another one of the same size and rating To prevent malfunction of the amplifier and sub woofer the protective circuit will cut the power supply to the amplifier sound will stop when an abnormal condition occurs In such a case switch the power to the system OFF and check the connection of the power supply and subwoofer Detect the cause and solve the problem Contact the dealer if you cannot detect the cause To prevent an electric shock or short circuit during connection and installation be sure to disconnect the negative terminal of the battery beforehand Confirm that no parts are behind the panel when drilling a hole for installation of the amplifier Be sure to protect all cables and important equipment such as fuel lines brake lines and the electrical wiring from damage DO NOT allow amplifier to come into contact with liquids due to for example the location where the amplifier is installed Electrical shock could result Also amplifier and speaker damage smoke and overheating could result from contact with liquids In addition the amplifier surface and the surface of any attached speakers could become hot to the touch and minor bums could result 2

Скачать
Случайные обсуждения