M-Audio WizooVerb W5 [47/158] Low high freq

M-Audio WizooVerb W5 [47/158] Low high freq
47
Tail
English
Low/High Freq
Low Freq and High Freq let you divide the tail into three frequency ranges:
Low: The frequency range below the selected Low Freq.
Mid: The frequency range between the selected Low Freq and High Freq.
High: The frequency range above the selected High Freq.
Low Freq influences the sound only when Low Time is other than 0%.
High Freq influences the sound only when High Time is other than 0%.
If you prefer to determine reverb time globally (Main Time) rather than fre-
quency-specifically (Low/High Time), simply ignore Low/High Freq.
Low/High Time
These knobs let you dial in different reverb times for the low, middle and
high frequencies that you have defined using Low/High Freq:
Low: Use Low Time to adjust low frequencies’ reverb time relative to
Main Time.
Mid: Midrange frequencies’ reverb time is determined directly by the
Main Time setting.
High: Use High Time to adjust high frequencies’ reverb time relative to
Main Time.
HDIR tails’ reverb times may only be adjusted in accordance with the orig-
inal room’s spectrum. If the HDIR model contains few low or high fre-
quencies, these frequency ranges’ reverb times can only be varied to a very
limited extent.
On the other hand, you are free to tweak an AIR tail’s frequency-dependent
decay times at will. For example, you can have the top end decay faster
than the low end, and vice versa.
Though HDIR models allow slight corrections of the tail, if you want edit
extensively or get really creative, change over to an AIR tail. And this is
how that’s done:
wizooverbW5 en und de.book Page 47 Monday, May 30, 2005 10:59 PM

Содержание

Похожие устройства

Скачать