Moxa UC-8410A-T-LX [33/86] Bpower on off module

Moxa UC-8410A-LX [33/86] Bpower on off module
UC-8410A Series Linux Software Advanced Configuration of Peripherals
3-13
Power on/off Module
cell_mgmt can be used to re-initialize the module without rebooting the UC-8410A-LX. Issue the following
command to power off the module:
moxa@Moxa:~# sudo cell_mgmt power_off
Issue the following command re-initialize and power on the cellular module:
moxa@Moxa:~# sudo cell_mgmt power_on
NOTE
Additional information about qmi utilities can be found at the following link.
http://www.freedesktop.org/wiki/Software/libqmi/
Configuring the Wireless LAN
You can configure the Wi-Fi connection on the UC-8410A Wi-Fi connection using a configuration file or by using
the
wpa_supplicant command (recommended).
NOTE
You might encounter compatibility issues if you configure Wi
-Fi settings using commands other than
wpa_supplicant
.
Use the following command to list the available wireless network IDs:
#iwlist wlan0 scanning
root@Moxa:# iwlist wlan0 scanning
wlan0 Scan completed :
Cell 01 - Address: 50:67:F0:61:2D:7A
Protocol:802.11b/g
ESSID:"MIS-WAP-1"
Mode:Managed
Frequency:2.412 GHz (Channel 1)
Quality=81/100 Signal level=-58 dBm Noise level=-92 dBm
Encryption key:on
Bit Rates:54 Mb/s
Configuring WPA2 Settings
The UC-8410A series computer supports WPA2 security using the /sbin/wpa_supplicant program. Refer to
the following table for configuration options. The Key required before joining network? column describes
whether an encryption and/or authentication key must be configured before associating with a network.
Infrastructure
mode
Authentication
mode
Encryption
status
Manual Key
required?
IEEE 802.1X
enabled?
Key required
before joining
network?
ESS Open None No No No
ESS Open WEP Optional Optional Yes
ESS Shared None Yes No Yes
ESS Shared WEP Optional Optional Yes
ESS WPA WEP No Yes No
ESS WPA TKIP No Yes No
ESS WPA AES No Yes No
ESS WPA-PSK WEP Yes Yes No
ESS WPA-PSK TKIP Yes Yes No
ESS WPA-PSK AES Yes Yes No

Содержание

Скачать