Moxa TRC-190-DC [10/21] Replacing the media converter slide in modules

TRC-190 Slide-in Modules

2-4

Replacing the Media Converter Slide-in Modules

To replace a media converter slide-in module in the TRC-190 chassis:

1. The media converter slide-in module can be hot-swapped, which means the chassis doesn’t have to power

off during the installation or when removing the module.

2. Remove the slide-in module to be replaced by loosening the panel fastener screw that secures the module

to the chassis. Slide the module out from the chassis.

3. Align the replacement slide-in module with the chassis installation slot so that the panel fastener screw is

at the top of the module.

4. Carefully slide the slide-in module into the slot while aligning the module’s circuit board with the installation

guide.

5. Ensure the slide-in module is firmly seated inside the chassis.

6. Push in and rotate the attached panel fastener screw clockwise to secure the module to the chassis.