![Moxa ioLogik W5312 [12/194] Environmental limits](/img/pdf.png)
Moxa ioLogik W5312 [12/194] Environmental limits
![Moxa ioLogik W5312-T [12/194] Environmental limits](/views2/1201254/page12/bgc.png)
ioLogik W5300 Introduction
1-7
Internet:
HSPA+:
• Up to 5.76 Mbps upload speed.
• Up to 14.4 Mbps download speed.
UMTS:
• Up to 384k bps upload/download speed.
GPRS/EDGE:
• Multi
-slot class: Class 12
• Coding schemes: CS1 to CS4
• Terminal device class: Class B
SMS:
Point-to-Point Text/PDU mode
SIM Control Voltage:
3 V / 1.8 V
LAN
Ethernet:
1 x 10/100 Mbps, RJ45
Protection:
1.5 kV magnetic isolation
Protocols:
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, SNTP
Serial Communication
Interface:
1 x RS-232/422/485, software selectable
(9
-pin D-Sub male, or 5-contact terminal block)
Baudrate:
300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Power Requirements
Power Input:
24 VDC nominal, 12 to 36 VDC
Physical Characteristics
Dimensions:
46.8 x 135 x 105 mm (1.84 x 5.31 x 4.13 in)
Weight:
495 g
Mounting:
DIN-rail (standard), wall (optional)
Environmental Limits
Operating Temperature:
Standard Models:
-10 to 55°C (14 to 131°F)
Wide Temp. Models:
-30 to 70°C (-22 to 158°F)
Storage Temperature:
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
Altitude:
Up to 2000 m
Note: Please contact Moxa if you
require products guaranteed to function properly at higher altitudes.
Standards and Certifications
Safety:
UL 508, EN 60950-1, NCC
EMI:
EN 55022; EN 61000-3-2; EN 61000-3-3;
FCC Part 15, Subpart B, Class A
EMS:
EN 55024, EN 61000-4-2, EN 61000-4-3,
EN
61000-4-4, EN 61000-4-5, EN 61000-4-6,
EN 61000
-4-8, EN 61000-4-11, EN 61000-6-2
Shock:
IEC 60068-2-27
Freefall:
IEC 60068-2-32
Vibration:
IEC 60068-2-6
Green Product:
RoHS, CRoHS, WEEE
Note: Please check Moxa’s website for the most up
-to-date certification status.
Warranty
Warranty Period:
• ioLogik W5312: 5 years
• ioLogik W5340/W5340
-HSPA: 2 years*
*Because of the limited lifetime of power relays, products that use that component are covered by
a 2
-year warranty.
Details:
See www.moxa.com/warranty
Содержание
- Edition 9 november 2016 1
- Iologik w5300 series user s manual 1
- Www moxa com product 1
- Copyright notice 2
- Disclaimer 2
- Iologik w5300 series user s manual 2
- Technical support contact information 2
- Trademarks 2
- Www moxa com support 2
- Table of contents 3
- Introduction 6
- Architecture 7
- Iologik w5300 introduction 7
- Using active opc server to resolve dynamic ip addresses 7
- Iologik w5300 introduction 8
- Resolving dynamic private ip issues with ddns 8
- Appearance 9
- Iologik w5300 introduction 9
- Overview 9
- Product features 9
- Iologik w5300 introduction 10
- Led indicators 10
- Physical dimensions unit mm 10
- Common specifications 11
- Package checklist 11
- Product selection guide 11
- Product specifications 11
- Environmental limits 12
- Iologik w5300 introduction 12
- Physical characteristics 12
- Power requirements 12
- Serial communication 12
- Standards and certifications 12
- Warranty 12
- Analog input 13
- Digital input 13
- Digital output 13
- Inputs and outputs 13
- Iologik w5300 introduction 13
- Iologik w5312 w5312 t specifications 13
- Iologik w5340 w5340 t w5340 hspa w5340 hspa t 13
- Mtbf mean time between failure 13
- Power requirements 13
- Digital input 14
- Digital output 14
- Iologik w5300 introduction 14
- Mtbf mean time between failure 14
- Power requirements 14
- Relay output 14
- Getting started 15
- Before testing 16
- Installing the ioadmin utility 16
- Iologik w5300 getting started 16
- Attention 17
- Configuring the computer s ip address 17
- Connecting to a power source 17
- Connecting to ioadmin via ethernet 17
- Grounding the unit 17
- Laboratory testing 17
- Warning 17
- Activating ioadmin and connecting to the iologik 18
- Iologik w5300 getting started 18
- Iologik w5300 getting started 19
- Iologik w5300 getting started 20
- Analog input 21
- Configuring digital i o channels 21
- Connecting i o devices 21
- Digital input dry contact 21
- Digital input wet contact connect to npn type sensor 22
- Digital input wet contact connect to pnp type sensor 22
- Digital output sink type 22
- Iologik w5300 getting started 22
- Relay output 22
- Attention 23
- Iologik w5300 getting started 23
- Testing i o devices 23
- Attention 24
- Din rail wall mounting 24
- Installing removing sim and sd cards 24
- Iologik w5300 getting started 24
- Connecting the iologik w5300 to a cellular network 25
- Iologik w5300 getting started 25
- Detailed instructions 26
- Installing aopc on a host with a static ip address 26
- Iologik w5300 getting started 26
- Iologik w5300 getting started 27
- Attention 28
- Export system config 28
- Import export a configuration file 28
- Import system config 28
- Using ioadmin to import export a device configuration 28
- The ioadmin utility 29
- Configuration file 30
- Device management list 30
- Key features 30
- On line wiring guide 30
- Remote management 30
- System requirements 30
- Ioadmin menu bar 31
- Iologik w5300 the ioadmin utility 31
- Menu bar file 31
- The ioadmin utility window 31
- Using the ioadmin utility 31
- Iologik w5300 the ioadmin utility 32
- Menu bar system 32
- Iologik w5300 the ioadmin utility 33
- Iologik w5300 the ioadmin utility 34
- Menu bar sort 34
- Iologik w5300 the ioadmin utility 35
- The wiring guide 35
- Auto scan iologik devices 36
- Ioadmin quick link buttons 36
- Iologik w5300 the ioadmin utility 36
- Sorting views 36
- Advanced functions delete restart reset import export config 37
- Basic functions add connect and disconnect 37
- Ioadmin navigation panel 37
- Iologik w5300 the ioadmin utility 37
- I o configuration panel general 38
- Iologik w5300 the ioadmin utility 38
- Main window 38
- Iologik w5300 the ioadmin utility 39
- Server info panel 39
- Server settings panel general 39
- Ioadmin status bar 40
- Iologik w5300 the ioadmin utility 40
- Message monitor panel general 40
- Synchronization rate status bar 40
- Attention 41
- Ioadmin configuration panels 41
- Iologik w5300 the ioadmin utility 41
- The server settings panel 41
- Dns settings 42
- Iologik w5300 the ioadmin utility 42
- Ip settings 42
- Modbus tcp alive check timeout settings 42
- The lan settings panel 42
- Configuring ai channels 43
- Snmp settings 43
- The i o configuration panel 43
- Iologik w5300 the ioadmin utility 44
- Two scaling methods slope formula and slope intercept 44
- Configuring virtual channels 45
- Iologik w5300 the ioadmin utility 45
- Iologik w5300 the ioadmin utility 46
- Configuring digital i o channels 47
- Configuring digital input channels 47
- Iologik w5300 the ioadmin utility 47
- Counter scaling 48
- Iologik w5300 the ioadmin utility 48
- Attention 49
- Configuring digital output relay output channels 49
- Iologik w5300 the ioadmin utility 49
- Iologik w5300 the ioadmin utility 50
- Relay count monitoring 50
- Attention 51
- Iologik w5300 the ioadmin utility 51
- Testing di and do channels 51
- Alias name 52
- Iologik w5300 the ioadmin utility 52
- The i o expansion panel 52
- Attention 53
- Iologik w5300 the ioadmin utility 53
- I o expansion step by step 54
- Iologik w5300 the ioadmin utility 54
- Iologik w5300 the ioadmin utility 55
- Iologik w5300 the ioadmin utility 56
- The active tags panel 56
- Active opc redundancy mode 57
- Iologik w5300 the ioadmin utility 57
- Active tags 58
- Heartbeat interval 58
- Iologik w5300 the ioadmin utility 58
- Read write privilege 58
- Attention 59
- Iologik w5300 the ioadmin utility 59
- Dial up setting 60
- Iologik w5300 the ioadmin utility 60
- The cellular settings panel 60
- Caller ids 61
- Iologik w5300 the ioadmin utility 61
- Operation mode 61
- Ddns settings 62
- Iologik w5300 the ioadmin utility 62
- Iologik w5300 the ioadmin utility 63
- Port forwarding 63
- Example gateway to gateway connection between iologik and ipsec servers 64
- Iologik ipsec vpn specifications 64
- Iologik w5300 the ioadmin utility 64
- Vpn settings panel iologik w5340 hspa t only 64
- What are virtual private networks vpns 64
- General settings 65
- Ioadmin vpn settings tab 65
- Iologik w5300 the ioadmin utility 65
- Manual key esp 65
- Iologik w5300 the ioadmin utility 66
- Isakmp psk 66
- Local identify 66
- Advanced settings 67
- Iologik w5300 the ioadmin utility 67
- Isakmp phase 1 67
- Isakmp phase 2 67
- Vpn system log events and error codes 67
- Cellular reconnection 68
- Iologik w5300 the ioadmin utility 68
- Iologik w5300 the ioadmin utility 69
- Meter sensor 69
- Op mode 69
- Attention 70
- Iologik w5300 the ioadmin utility 70
- Network statistics 70
- Iologik w5300 the ioadmin utility 71
- Watchdog panel 71
- Attention 72
- Click go logic panel 72
- Iologik w5300 the ioadmin utility 72
- Click go logic 73
- Click go function comparison table by product line 74
- I overview 74
- Ii getting started 74
- Iii start working with the logic 74
- Iologik w5300 click go logic 74
- Overview 74
- To get a quick start 74
- Click go logic basics 75
- Features 75
- Iologik w5300 click go logic 75
- Attention 76
- Click go development process 76
- Working with the rules 76
- Attention 77
- Configurable dio channel mode selection 77
- Digital input mode selection 77
- I o configuration 77
- Attention 78
- Digital output mode selection 78
- Iologik w5300 click go logic 78
- Alias configuration 79
- Analog input mode selection 79
- Iologik w5300 click go logic 79
- Attention 80
- Iologik w5300 click go logic 80
- Testing the i o channels 80
- Defining global variables 81
- Internal register integer settings 81
- Iologik w5300 click go logic 81
- Timer settings 81
- E mail server 82
- Iologik w5300 click go logic 82
- Snmp trap server 82
- Iologik w5300 click go logic 83
- Active message server 84
- Iologik w5300 click go logic 84
- Sms phone book 84
- Ftp settings 85
- Iologik w5300 click go logic 85
- Working off working days 85
- Data logging profile list 86
- Iologik w5300 click go logic 86
- Iologik w5300 click go logic 87
- Click go logic basics 88
- Internal register float settings 88
- Iologik w5300 click go logic 88
- Working with logic 88
- If a then b else c 89
- Iologik w5300 click go logic 89
- If then else conditionals 90
- Iologik w5300 click go logic 90
- Di digital input 91
- Iologik w5300 click go logic 91
- Ai analog input 92
- Counter 92
- Iologik w5300 click go logic 92
- Iologik w5300 click go logic 93
- Relay counter 93
- Virtual channel 93
- Internal register integer 94
- Iologik w5300 click go logic 94
- Expansion module connection fail 95
- Iologik w5300 click go logic 95
- Schedule 95
- Iologik w5300 click go logic 96
- More information about repeat interval vs edge detection 96
- System start up 96
- Iologik w5300 click go logic 97
- Iologik w5300 click go logic 98
- Then else actions 98
- Counter 99
- Iologik w5300 click go logic 99
- Iologik w5300 click go logic 100
- Pulse output 100
- Iologik w5300 click go logic 101
- Relay counts 101
- Internal register integer 102
- Iologik w5300 click go logic 102
- Active message 103
- Attention 103
- Iologik w5300 click go logic 103
- Snmp trap 103
- Iologik w5300 click go logic 104
- Iologik w5300 click go logic 105
- Short message service 105
- Data log start stop 106
- Ftp service 106
- Iologik w5300 click go logic 106
- Activating the rule set 107
- Iologik w5300 click go logic 107
- Upload restart and run 107
- Import export configuration 108
- Iologik w5300 click go logic 108
- Rule set management bar 108
- Planning and assistance 109
- Iologik w5300 planning and assistance 110
- Known issue 1 dynamic or private ip over a cellular network 110
- Known issue 2 low bandwidth and slow response time 110
- Known issue 3 unexpected disconnection from cellular networks carriers 110
- Known issues of cellular monitoring systems 110
- Active opc server with a static ip address 111
- Iologik w5300 planning and assistance 111
- Known issue 4 large power consumption when attached to base stations 111
- Cellular remote i o architecture 112
- Iologik w5300 planning and assistance 112
- Using ioadmin to perform simple data monitoring from a remote site 112
- Iologik w5300 planning and assistance 113
- Expanding input output channels 114
- Iologik w5300 planning and assistance 114
- Iologik w5300 planning and assistance 115
- Iologik w5300 planning and assistance 116
- Iologik w5300 planning and assistance 117
- Using modbus tcp protocol with your program 117
- Iologik w5300 planning and assistance 118
- Iologik w5300 planning and assistance 119
- Iologik w5300 planning and assistance 120
- Using the counter to get meter readings and statistics 120
- Iologik w5300 planning and assistance 121
- Log profile creation 121
- Record your i o data in the data log file 121
- Iologik w5300 planning and assistance 122
- Iologik w5300 planning and assistance 123
- Iologik w5300 planning and assistance 124
- Log file upload with ftp 124
- Iologik w5300 planning and assistance 125
- Iologik w5300 planning and assistance 126
- Connecting a modbus rtu serial device attached to the iologik over a cellular network 127
- Connecting to a scada system 127
- Environment 127
- Iologik w5300 planning and assistance 127
- Diagram 128
- Iologik w5300 planning and assistance 128
- Setup procedure 128
- Iologik w5300 planning and assistance 129
- Setup procedure 129
- Updating serial tags to scada system with active opc server over a cellular network 129
- Iologik w5300 planning and assistance 130
- Handling front end events and alarms 131
- Iologik w5300 planning and assistance 131
- Setup procedure 131
- Iologik w5300 planning and assistance 132
- Setup procedure 132
- Sms escalation and acknowledgement 132
- Iologik w5300 planning and assistance 133
- Iologik w5300 planning and assistance 134
- Setup procedure 134
- Sms commands for monitoring and control 134
- Enabling the power saving function and secure wake on call 135
- Iologik w5300 planning and assistance 135
- Setup procedure 135
- Enabling ethernet and cellular redundancy 136
- Iologik w5300 planning and assistance 136
- Setup procedure 136
- Pin outs and cable wiring 137
- Cn1 sma cellular antenna connector 138
- Cn2 db9 male rs 232 connector 138
- Cn3 rj 45 ethernet connector 138
- Iologik w5300 pin outs and cable wiring 138
- Pinouts 138
- Iologik w5300 pin outs and cable wiring 139
- Tb1 power input terminal block 139
- Tb2 i o terminal block w5340 139
- Tb3 5 pin 4 wire 2 wire rs 422 485 terminal block 139
- Cable wiring 140
- Digital input dry contact 140
- Digital input wet contact 140
- Iologik w5300 pin outs and cable wiring 140
- Tb2 i o terminal block w5312 140
- Analog input 141
- Attention 141
- Digital output sink mode 141
- Iologik w5300 pin outs and cable wiring 141
- Relay output 141
- Sms commands 142
- Details 143
- Example 143
- Sms command syntax 143
- Sms command table 143
- System information commands 143
- Example 144
- Iologik w5300 sms commands 144
- Local i o commands 144
- Expansion i o commands 145
- Iologik w5300 sms commands 145
- Details 146
- Example 146
- Internal registers integer 146
- Iologik w5300 sms commands 146
- Optional commands 146
- Modbus tcp address mapping 147
- Iologik w5300 modbus tcp address mapping 148
- Iologik w5340 and iologik w5340 hspa modbus mapping 148
- Xxxx read write coils support functions 1 5 15 148
- Iologik w5300 modbus tcp address mapping 149
- Iologik w5300 modbus tcp address mapping 150
- Iologik w5300 modbus tcp address mapping 151
- Iologik w5300 modbus tcp address mapping 152
- Xxxx read only coils supports function 2 152
- Iologik w5300 modbus tcp address mapping 153
- Xxxx read only registers supports function 4 153
- Iologik w5300 modbus tcp address mapping 154
- Xxxx read write registers supports functions 3 6 16 154
- Iologik w5300 modbus tcp address mapping 155
- Iologik w5300 modbus tcp address mapping 156
- Iologik w5300 modbus tcp address mapping 157
- Iologik w5300 modbus tcp address mapping 158
- Iologik w5300 modbus tcp address mapping 159
- Iologik w5300 modbus tcp address mapping 160
- Iologik w5300 modbus tcp address mapping 161
- Iologik w5300 modbus tcp address mapping 162
- Iologik w5300 modbus tcp address mapping 163
- Iologik w5300 modbus tcp address mapping 164
- Xxxx write registers supports function 8 164
- Iologik w5300 modbus tcp address mapping 165
- Iologik w5312 modbus mapping 165
- Xxxx read write coils supports functions 1 5 15 165
- Iologik w5300 modbus tcp address mapping 166
- Iologik w5300 modbus tcp address mapping 167
- Iologik w5300 modbus tcp address mapping 168
- Iologik w5300 modbus tcp address mapping 169
- Iologik w5300 modbus tcp address mapping 170
- Xxxx read only coils supports function 2 170
- Xxxx read only registers supports function 4 170
- Iologik w5300 modbus tcp address mapping 171
- Iologik w5300 modbus tcp address mapping 172
- Xxxx read write registers supports functions 3 6 16 172
- Iologik w5300 modbus tcp address mapping 173
- Iologik w5300 modbus tcp address mapping 174
- Iologik w5300 modbus tcp address mapping 175
- Iologik w5300 modbus tcp address mapping 176
- Iologik w5300 modbus tcp address mapping 177
- Iologik w5300 modbus tcp address mapping 178
- Iologik w5300 modbus tcp address mapping 179
- Iologik w5300 modbus tcp address mapping 180
- Iologik w5300 modbus tcp address mapping 181
- Iologik w5300 modbus tcp address mapping 182
- Iologik w5300 modbus tcp address mapping 183
- Iologik w5300 modbus tcp address mapping 184
- Iologik w5300 modbus tcp address mapping 185
- Xxxx write registers supports function 8 185
- Rfc1213 mib ii supported snmp variables 186
- Snmp agents with mib ii rs 232 like groups 186
- Iologik w5300 snmp agents with mib ii rs 232 like groups 187
- Iologik w5300 snmp agents with mib ii rs 232 like groups 188
- Iologik w5340 w5340 hspa 188
- Private mib file and snmp variables 188
- Iologik w5300 snmp agents with mib ii rs 232 like groups 189
- Factory default settings 190
- Iologik w5300 factory default settings 191
- Iologik w5300 network port usage 191
- Problem description 192
- Self checklist 192
- Sim card settings 192
- Troubleshooting the cellular i o connection 192
- Active opc server aopc 193
- Cellular modem error codes 193
- Client test 193
- Ioadmin 193
- Iologik w5300 troubleshooting the cellular i o connection 193
- Remote client test 193
- How to set active opc to get better connection quality 194
- Service delay time 194
- Which tcp ports should initial open 194
Похожие устройства
- Moxa ioLogik W5312 Технические характеристики
- Moxa ioLogik W5312 Брошюра
- Moxa ioLogik W5312-T Инструкция по эксплуатации
- Moxa ioLogik W5312-T Технические характеристики
- Moxa ioLogik W5312-T Брошюра
- Moxa ioLogik W5340 Инструкция по эксплуатации
- Moxa ioLogik W5340 Технические характеристики
- Moxa ioLogik W5340 Брошюра
- Moxa ioLogik W5340-T Инструкция по эксплуатации
- Moxa ioLogik W5340-T Технические характеристики
- Moxa ioLogik W5340-T Брошюра
- Moxa ioLogik R1210 Инструкция по эксплуатации
- Moxa ioLogik R1210 Технические характеристики
- Moxa ioLogik R1210 Руководство по аппаратной части
- Moxa ioLogik R1210-T Инструкция по эксплуатации
- Moxa ioLogik R1210-T Руководство по аппаратной части
- Moxa ioLogik R1210-T Технические характеристики
- Moxa ioLogik R1212 Инструкция по эксплуатации
- Moxa ioLogik R1212 Руководство по аппаратной части
- Moxa ioLogik R1212 Технический паспорт