Bosch BSGL 32383 [10/130] Before using for the first time

Bosch BSGL 32383 [10/130] Before using for the first time
9
When disconnecting the appliance from the mains,
pull on the plug, not the power cord.
Do not pull the power cord around sharp corners or
allow it to become trapped.
Unplug the power cord from the mains before
carrying out any work on the vacuum cleaner or its
accessories.
Do not use the vacuum cleaner if it
is damaged. Unplug the power cord from the mains if
a fault is detected.
For safety reasons, only authorised after-sales
service personnel are permitted to carry out repairs
and fit replacement parts to the vacuum cleaner.
Protect the vacuum cleaner from outside weather
conditions, moisture and sources of heat.
The vacuum cleaner is not suitable for use on
building sites.
=> Vacuuming up building rubble could damage the
appliance.
Switch off the appliance when it is not in use.
At the end of its life, the appliance should be
rendered unusable, then disposed of in an
appropriate manner.
Plastic bags and films must be kept out of the reach
of children before disposal (risk of suffocation).
do not pour any flammable substances or substances
containing alcohol onto the filters (filter bag, motor
protective filter, exhaust filter, etc.).
Disposal information
Packaging
The packaging is designed to protect the vacuum
cleaner from being damaged during transportation. It
is made of environmentally friendly materials and can
be recycled.
Dispose of packaging that is no longer required at an
appropriate recycling point.
Used vacuum cleaners
Used vacuum cleaners still contain many valuable
materials. Therefore, please take your used vacuum
cleaner to your retailer or recycling centre to be
recycled. For current disposal methods, please
enquire at your retailer or your local council.
Disposal of filters and dust bags
Filters and dust bags are made from environmentally
friendly materials.
As long as they do not contain substances that are
not permitted to be disposed of in the household
rubbish, you can dispose of them with your normal
household rubbish.
!
Please note
The mains socket must be protected by at least a 16
amp fuse.
If a fuse should blow when you switch on the
appliance, this may be because other electrical
appliances which have a high current draw are
connected to the same power circuit.
To prevent the fuse from blowing, select the lowest
power setting before switching the appliance on, and
increase the power only once it
is running.
Before using for the first time
Figure
Push the handle onto the flexible tube and until it
engages.
Figure
Push the crevice nozzle and upholstery nozzle back
into the accessories holder as indicated.
Setting up
Figure
a)Push the flexible hose adapter into the air intake
opening on the vacuum cleaner lid until it engages.
b)To remove the flexible hose, press the two lugs
together and pull the tube out.
Figure
a)Connect the handle and the telescopic tube together.
b)Push the handle into the telescopic tube until
it engages.
Press on the locking collar and pull out the
telescopic tube to disconnect.
Figure
a)Connect the floor tool and the telescopic tube
together.
b)Push the telescopic tube into the connecting piece of
the floor tool until it engages.
Press on the locking collar and pull out the
telescopic tube to disconnect.
Figure
To adjust the length of the telescopic tube, adjust
the adjusting sleeve/sliding switch in the direction of
the arrow and adjust the tube to the required length.
Figure
Holding the power cord by the plug, pull out the
required length and plug it into the mains socket.
Figure
Press the on/off button in the direction of the arrow
to switch your vacuum cleaner on/off.
Figure
Adjust the suction by turning the on/off button in the
direction of the arrow.
Vacuuming
Figure
Adjusting the floor tool:
Rugs and carpets =>
Hard surfaces =>
10*
9
8
7
6*
5*
4*
3
2*
1*
*
Depending on equipment

Содержание

Похожие устройства

When disconnecting the appliance from the mains pull on the plug not the power cord Do not pull the power cord around sharp corners or allow it to become trapped Unplug the power cord from the mains before carrying out any work on the vacuum cleaner or its accessories Do not use the vacuum cleaner if it is damaged Unplug the power cord from the mains if a fault is detected For safety reasons only authorised after sales service personnel are permitted to carry out repairs and fit replacement parts to the vacuum cleaner Protect the vacuum cleaner from outside weather conditions moisture and sources of heat The vacuum cleaner is not suitable for use on building sites Vacuuming up building rubble could damage the appliance Switch off the appliance when it is not in use At the end of its life the appliance should be rendered unusable then disposed of in an appropriate manner Plastic bags and films must be kept out of the reach of children before disposal risk of suffocation do not pour any flammable substances or substances containing alcohol onto the filters filter bag motor protective filter exhaust filter etc Disposal information Packaging The packaging is designed to protect the vacuum cleaner from being damaged during transportation It is made of environmentally friendly materials and can be recycled Dispose of packaging that is no longer required at an appropriate recycling point Used vacuum cleaners Used vacuum cleaners still contain many valuable materials Therefore please take your used vacuum cleaner to your retailer or recycling centre to be recycled For current disposal methods please enquire at your retailer or your local council Disposal of filters and dust bags Filters and dust bags are made from environmentally friendly materials As long as they do not contain substances that are not permitted to be disposed of in the household rubbish you can dispose of them with your normal household rubbish Please note The mains socket must be protected by at least a 16 amp fuse If a fuse should blow when you switch on the appliance this may be because other electrical appliances which have a high current draw are connected to the same power circuit To prevent the fuse from blowing select the lowest power setting before switching the appliance on and increase the power only once it is running Before using for the first time Figure Q Push the handle onto the flexible tube and until it engages Figure Push the crevice nozzle and upholstery nozzle back into the accessories holder as indicated Setting up Figure El a Push the flexible hose adapter into the air intake opening on the vacuum cleaner lid until it engages b To remove the flexible hose press the two lugs together and pull the tube out Figure a Connect the handle and the telescopic tube together b Push the handle into the telescopic tube until it engages Press on the locking collar and pull out the telescopic tube to disconnect Figure E9 a Connect the floor tool and the telescopic tube together b Push the telescopic tube into the connecting piece of the floor tool until it engages Press on the locking collar and pull out the telescopic tube to disconnect Figure To adjust the length of the telescopic tube adjust the adjusting sleeve sliding switch in the direction of the arrow and adjust the tube to the required length Figure Holding the power cord by the plug pull out the required length and plug it into the mains socket Figure El Press the on off button in the direction of the arrow to switch your vacuum cleaner on off Figure El Adjust the suction by turning the on off button in the direction of the arrow Vacuuming Figure ns Adjusting the floor tool Rugs and carpets Hard surfaces 0 SK Depending on equipment 9