Loewe Xelos A 42 HD+ 100 — настройка спутникового телевидения и автоматический поиск станций [13/66]
![Loewe Xelos A 42 HD+ 100 [13/66] Initial installation](/views2/1020519/page13/bgd.png)
13 -
Normally, you do not need to change the values for high
and low band, unless the LNC (LNB) of your satellite
system uses a different oscillator frequency (important
for the frequency display).
After you have made these settings, you should receive
the picture and sound of the selected satellites (only with
Astra1 and HOTBIRD).
If you want to run the station search independently of
the channel grid, select frequency search for the search
method.
The symbol rates are specified by the satellite provider
and do not normally need to be changed.
Select the signal source from a list, the station of which is
to be at the top of your station list (starting with station
slot 1).
Start the automatic station search with OK.
First TV stations, then radio stations are searched for.
The stations found in the automatic search are divided into
the appropriate station blocks depending on the previously
selected antenna cables (signal sources). Subsequently the
stations can only be re-sorted within these blocks. At the
beginning of the station list you will find the block with
the stations of the preferred signal source.
Any mixed sorting of stations from different signal sources
is only possible with the favourites list.
➠ For TV sets with MHEG-5 software the stations are
tied to “Logical Channel Numbers” – “LCN” and
sorted from 1-799. Digital stations without “LCN” are
stored from 800 onwards. Analogue stations are stored
from 1001.
Then the connection and sound component wizard
starts which helps you to log in, set and connect video
recorders, decoders, a loudspeaker system or a HiFi/AV
amplifier to your TV set. DVD players and DVD recorders
are already registered at the factory.
You can start the connection wizard and the sound
components wizard manually later and add new devices.
Further information is available from page
40
(Connection
wizard) and page
47
(Sound components wizard).
Initial installation
Explanations of the setting possibilities, including the upgradeable
satellite reception:
Select the country for country-specific pre-settings.
If UK or IRL is selected for the location of TV set, it is pos-
sible to activate MHEG-5 (UK Freeview) for the TV set.
A dialogue appears, where you can confirm to set the
operating software to the selected location.
If Yes is selected and confirmed with OK, the TV set turns
off and on again automatically. First installation starts
again after activating the operation software.
If MHEG-5 was activated, DVB-C and DVB-S can not be
used anymore. Only terrestrial/cable and DVB-T stations
are available.
Antenna/cable (analogue):
analogue stations via
cable/antenna
DVB-T: digital terrestrial stations
DVB-C: digital stations via cable
DVB-S (line 1): digital stations via satellite
DVB-S (line 2): digital stations via satellite
You can state whether coded stations are to be searched
for in the search/update.
Select yes then coded stations
are also searched for. However, these stations can only
be received in connection with a CA module and the
appropriate Smart Card.
Handling of the CA module is
described on page 35.
If you are using an active antenna, then select yes (5V)
for the antenna power supply.
The conventional settings will be derived from the selec-
tion of set location. Only change this if you know other
symbol rates and modulation types or if you have to spec-
ify the network ID for your cable network (information
available from your cable network provider). If you want
to run the station search independently of the channel
grid, select frequency search for the search method.
Select which satellite(s) you receive from a list. For more
than one satellite, select the type of your changeover
switch or communal satellite system additionally. Ask
your dealer in this regard.
Specify here whether the high band of the selected satel-
lite is to be searched in addition to the low band.
LNC
frequencies
Low Band /
High Band
Search
method
Symbol rates
Favoured
signal source
Start search
Connecting
additional
devices
Location of
TV set
Antenna
selection
Encrypted
stations
DVB-T:
Antenna
DVB-C:
Settings
DVB-S:
Satellite
system
High band
continued on next page
p
33156_024_Xelos_A32_42_GB_9_00_B13 1333156_024_Xelos_A32_42_GB_9_00_B13 13 03.07.2008 15:36:5003.07.2008 15:36:50
Содержание
- Operating instructions p.1
- Contents p.2
- Remote control tv functions p.3
- Control unit front side of the device p.4
- Radio only for dvb reception provided the station broadcasts this otherwise switch over to an audio input p.4
- Only with integrated digital recorder p.4
- You can change this during the ini tial installation page 12 or in the connection wizard page 40 p.5
- Factory settings av1 dvd player av2 dvd recorder p.5
- Connections rear side of the device xelos a 32 37 p.5
- Before you connect other devices or make any changes please start the connection wizard page 40 and the sound components wizard page 47 and then follow the instructions that are displayed on the tv set p.5
- You can change this during the ini tial installation page 12 or in the connection wizard page 40 before you connect other devices or make any changes please start the connection wizard page 40 and the sound components wizard page 47 and then follow the instructions that are displayed on the tv set p.6
- Factory settings av1 dvd player av2 dvd recorder p.6
- Connections rear side of the device xelos a 42 p.6
- Welcome p.7
- You can return to the previous step or exit the wizard at any time p.8
- Welcome p.8
- The wizards in overview p.8
- Operating convenience with wizards p.8
- Info display and tv index p.8
- If after the initial installation you want to search for new stations or if you have set up your antenna for the first time then you can handle this task with the help of the search wizard see page 24 you will find the search wizard in the tv menu under setting p.8
- You will find the connection wizard in the tv menu under connection p.8
- For your safety p.9
- For your safety p.10
- Environmental protection p.10
- Preparing the remote control unit p.11
- Installing the tv set p.11
- Initial installation p.11
- Connecting the tv set p.11
- Switching the set on with the remote control p.12
- Exit the wizard with the end button if available p.12
- Switching the set off with the remote control p.12
- Display p.12
- Switch on in radio mode p.12
- Continued on next page p.12
- Press the ring up down left right to move the cursor and to select settings p.12
- By pressing the ok button a setting is confirmed and you will go to the next step p.12
- Press the on off button in the middle for about 2 seconds to switch the tv set on off p.12
- Brief explanation of button functions p.12
- Press the on off button p.12
- Before switching off the set with the mains switch we recommend you to switch it to standby mode p.12
- Press r on the tv control unit p.12
- An example of multiple selection using the yellow button p.12
- Or tv button p.12
- Activate the mains switch on the back bottom of the set the display in the control panel on the front of the set will be illuminated red the set is now in standby mode p.12
- Or press the radio button on the remote control radio mode see page 34 p.12
- Or ok button station list is called p.12
- With the yellow button you can select or remove the indi vidual items see the example below when an element is selected it is marked by a checkmark p.12
- Or numeric buttons 0 99 p.12
- Use this button to go back one step p.12
- Or assist button assist menu is called p.12
- Turning the set on off p.12
- Meaning of the display colour red standby mode green tv set is switched on orange radio mode tv set receives epg data or timer recording active p.12
- The first step with the wizard starts when selecting the language for the user prompts from this point on follow the instructions on your tv set p.12
- Initial installation after switching on for the first time this wizard starts automatically after the set is switched on for the first time however it can also be called later manually in the tv index see repeat initial installation on page 16 p.12
- Switching the tv set to standby mode p.12
- Initial installation p.12
- Switching the tv on off on the control unit p.12
- First installation wizard p.12
- Initial installation p.13
- Positioning aligning the dvb t antenna p.14
- Initial installation p.14
- The info display p.15
- Operating convenience p.15
- General information on menu operation p.15
- The index in the tv set p.16
- The assist menu p.16
- Operating convenience p.16
- Operating convenience p.17
- Tv menu overview diagram p.17
- Tv menu p.17
- Sound stations timer functions p.17
- Settings p.17
- Recordin p.17
- Radio menu overview diagram p.17
- Radio menu p.17
- Picture sound connections p.17
- You can switch back and forth quickly between two stations using these buttons p.18
- If favourites are selected the station in the favourites list is switched over with p p see page 19 if other languages or dvb subtitles are available on dvb stations the language and subtitle selection is displayed under the station display see also 23 additional selection possibilities for dvb stations p.18
- With the station list p.18
- Enter initial letters with the numeric buttons like with a mobile phone keypad see page 15 the first station for the specified letters is marked p.18
- With the numeric keys of the remote control p.18
- Digit stations press all four numeric buttons the station changes imme diately p.18
- With the keys p and p on the remote control p.18
- Digit stations keep the numeric button pressed for one second the station changes immediately or press numeric button briefly the station changes after 2 seconds immediate change for up to 9 stored stations p.18
- When you select an empty memory location the tv switches to the next available station p.18
- Digit and 3 digit stations press first and second numeric button briefly keep the last numeric button pressed for one second the station changes immediately or press all the numeric buttons briefly the station changes after 2 seconds changes immediately in case of up to 99 or 999 stored stations p.18
- Select station p.18
- Daily operation p.18
- P p station up down the station display with sound identification is displayed briefly p.18
- Call last viewed station for tv sets with mheg 5 software p.18
- P p scroll in the pages of the station list p.18
- Blue button changes the sorting between numerically and alphabetically p.18
- Or enter the number of the station with the numeric buttons the marked station is shown as a small picture p.18
- Ok the marked station is called p.18
- Ok call station list p.18
- Mark stations ok the marked station is called p.18
- Mark stations p.18
- Jump to the next station block p.18
- In normal tv mode without other displays no favour ites selected p.18
- If favourites are selected you can switch to the station in the favourites list with the numeric buttons see page 19 maximum two digit station numbers are possible p.18
- Red button calls the favourites list p.19
- Red button back to the station list green button scan all stations of the currently selected favourites list yellow button change the favourites lists see page 27 p.19
- Please ensure that the appropriate devices have also been registered with the connection wizard see page 40 p.19
- P p scroll in the pages of the favourites list p.19
- Other favourites lists can only be selected if these contain stations p.19
- Ok the marked station is called p.19
- Ok calls the station list p.19
- Ok call the station list if the favourites list is displayed switch to the station list first p.19
- You can save and call your favourite stations in 6 favourites lists e g for multiple users each favourites list can contain up to 99 stations after initial installation 10 stations from the station list are already stored in the first list change the favourites list to suit your requirements see put together change favourites lists on page 27 p.19
- With the station list p.19
- Mark stations p.19
- With the favourites lists p.19
- In numerical sorting the connections or devices are always at the beginning of the list in alphabetic sorting the connections or devices are sorted in alphabetically p.19
- With the av selection p.19
- In normal tv mode without other displays p.19
- Select video source p.19
- Explanation of the icons following station names digital dvb t station terrestrial via antenna digital dvb c station via cable digital dvb s station via satellite coded station p.19
- Select station directly with numeric buttons or p.19
- Explanation of the favourites lists the selection made with the red button favourites list is retained until you switch back to the station list with the red button if favourites are selected the name of the favourites list appears in the status display after the station name after changing stations p.19
- Select other favourites list p.19
- Daily operation p.19
- Select desired device or connection ok switch over p.19
- Call av selection p.19
- Select connection device ok switch over p.19
- A signal from the selected video source should now be visible p.19
- Daily operation p.20
- Adjusting the sound p.20
- Operation without remote control p.21
- Daily operation p.21
- Adjusting the picture p.21
- Daily operation p.22
- Button functions p.22
- Daily operation p.23
- Tv stations p.24
- Managing stations p.24
- Managing stations p.25
- Not possible for mheg 5 stations stations can only be resorted within the signal source block p.26
- Not possible for mheg 5 stations dvb stations which also transmit the station name cannot be renamed in this case the rename function is hidden p.26
- Move station change order p.26
- Managing stations p.26
- Yellow button starts move station mark several stations if needed ok selection ended select insertion position from which the selected stations are to be inserted ok to execute the move p.26
- In this menu you can delete move rename or restore stations or numeric buttons select the appropriate station scroll with p p if necessary p.26
- Under the 1st letter of the name you will see a line indicating the current input position input position one character to the right also for blanks input position one character to the left deletes the character p.26
- Green button switch upper lower case letters p.26
- The restored station is sorted in according to its signal source at the end of the respective signal bloc p.26
- Green button starts restore stations p.26
- Station p.26
- Enter the letters one after another with the numeric buttons on the remote control like using a mobile phone keypad press a numeric button until the desired charac ter appears the available letters are printed respectively on the buttons different special characters can be selected with button 1 p.26
- Select stations go to the menu line below p.26
- Delete station p.26
- Select station o p.26
- Change station can also be called via the station list page 18 p.26
- Select settings go to the menu line below p.26
- Change delete move rename restore station p.26
- Select change stations ok call list of stations p.26
- Call tv menu p.26
- Restore stations stations which have been deleted from the station list can be restored p.26
- Rename station p.26
- Red button starts delete station select several stations to be deleted if necessary ok to execute the delete p.26
- Ok to save new name p.26
- P p scroll in the pages of the station list if necessary p.27
- Call tv menu p.27
- Ok transfers the station to the favourites list the new station is inserted at the end of the favour ites list proceed in the same manner with addi tional stations p.27
- Blue button starts rename favourites list p.27
- Ok to save new name p.27
- All stations left column must be selected if not change the list with p.27
- Ok to execute the move p.27
- Add station to favourites list p.27
- Ok confirms clear favourites list p.27
- Numeric buttons enter new name same procedure as under rename station see page 26 p.27
- Move change order of stations in the favourites list p.27
- Mark station to be moved p.27
- Yellow button starts move station p.27
- The insertion position can also be selected with the numeric buttons p.27
- Mark station to be deleted ok removes the marked station from the favourites list p.27
- Select stations go to the menu line below p.27
- Managing stations p.27
- Select settings go to the menu line below p.27
- Green button select the next favourites list p.27
- Select select change favourites ok calls list of all stations and last active favourites list p.27
- Favourites list right column must be selected if not change the list with p.27
- Select insertion position at which the selected station is to be inserted p.27
- Enter the initial letters in case of alpha betical station orde p.27
- Rename favourites list p.27
- Each favourites list can contain up to 99 stations you can put together the favourites lists to suit your requirements e g topic lists other persons using this tv set can create their own favourites lists the favourites lists also have the advantage that the stations of different signal sources can be stored in the order you wish p.27
- Red button starts clear favourites list p.27
- Delete station from favourites list p.27
- Put together change favourites list p.27
- Change favourites can also be called via the favourites list page 19 p.27
- Picture in picture pip p.28
- Picture in picture p.28
- Picture in picture p.29
- Configure picture in picture pip mode p.29
- Electronic programme guide epg p.30
- Electronic programme guide p.30
- Configuring epg p.31
- Electronic programme guide p.31
- _024_xelos_a32_42_gb_9_00_b32 32 33156_024_xelos_a32_42_gb_9_00_b32 32 03 7 008 15 38 26 03 7 008 15 38 26 p.32
- Teletext p.32
- Teletext menu p.33
- Teletext p.33
- Digital teletext mheg 5 p.33
- Radio mode p.34
- Epg electronic programme guide radio p.34
- Conditional access module ca module p.35
- Software update p.36
- Timer functions p.38
- Parental lock p.38
- Other settings p.38
- Time and date p.39
- Other settings p.39
- On screen displays p.39
- The connection wizard can be exited at any time with the end button p.40
- The connection diagram shows the currently logged in equipment p.40
- The connection diagram is displayed again connect the equipment to the corresponding connections of the tv set as shown in the connection diagram p.40
- The accessory equipment should be connected to the tv set with the power off disconnected from the mains see also the instructions in the operating manual of the equipment to be connected p.40
- Select the equipment you want to connect or remove equipment you no longer use in the av equipment selection p.40
- Select new devices modifications ok calls the wizard p.40
- Select equipment connection p.40
- Select connections go to the menu line below p.40
- Operating additional equipment p.40
- Ok proceed p.40
- New equipment should not be connected until it has been logged in in the connection wizard first dvd player on av1 and dvd recorder on av2 are preset at the factory p.40
- Connection wizard p.40
- Connection diagram p.40
- Call tv menu p.40
- Yellow button connect disconnect equipment p.40
- Av equipment selection p.40
- The connection wizard serves to connect accessory equipment optimally to the tv set make changes to the wiring of the devices or remove mo mentarily logged in equipment the exact process of the wizard depends on the choice of equipment p.40
- A camcorder camera is connected to the tv set additi onally in the following example p.40
- Operating additional equipment p.41
- Operating additional equipment p.42
- Devices to the connections av1 av2 avs p.42
- Operating additional equipment p.43
- Operating additional equipment p.44
- Devices to the hdmi dvi connections p.44
- Operating additional equipment p.45
- Devices to the pc in connection p.45
- Operating additional equipment p.46
- Devices to the component in connection p.46
- Sound components wizard p.47
- Play sound via tv speakers and active subwoofer p.47
- Play sound via active speakers p.47
- Operating additional equipment p.47
- Operating additional equipment p.48
- Connecting audio amplifiers p.48
- Rs 232c interface upgradable interface p.49
- Operating additional equipment p.49
- Audio connection in hdmi dvi devices p.49
- Assignment of the digital audio input p.49
- The direct way to record p.50
- Operating additional equipment p.50
- Timer recording with external devices p.51
- Operating additional equipment p.51
- Photoviewer p.52
- Operating additional equipment p.52
- Operating additional equipment p.53
- Operating additional equipment p.54
- 23 24 25 26 p.54
- 2 3 4 5 6 p.54
- Operating loewe equipment p.54
- Operating additional equipment p.55
- Rotating the tv set upgradable interface p.56
- Operating additional equipment p.56
- Troubleshooting p.57
- Troubleshooting p.58
- Technical data p.59
- General data p.59
- Electrical data p.59
- Connections max equipment p.59
- Setup possibilities p.60
- Accessories p.60
- Equipment variants and upgrade kits p.61
- Accessories p.61
- Glossary p.62
- Glossary p.63
- The code number 3001 cancels an access code and thus the parental lock please keep in a safe place p.64
- Glossary p.64
- Service p.66
Похожие устройства
-
Loewe BluTech VisionИнструкция по эксплуатации -
Loewe Art 32 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 47 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 42 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 37 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Spheros 20Инструкция по эксплуатации -
Loewe Xelos A 42Инструкция по эксплуатации -
Loewe Xelos A 37 Full-HD+ 100Инструкция по эксплуатации -
Loewe Xelos A 37Инструкция по эксплуатации -
Loewe Xelos A 32 Full-HD+ 100Инструкция по эксплуатации -
Loewe Xelos A 32Инструкция по эксплуатации -
Loewe Xelos A 26Инструкция по эксплуатации
Узнайте, как правильно настроить спутниковое телевидение, выполнить автоматический поиск станций и подключить дополнительные устройства для улучшения качества сигнала.