Loewe Xelos A 42 HD+ 100 — оптимизация DVB-T антенны для лучшего приема сигнала [14/66]
![Loewe Xelos A 42 HD+ 100 [14/66] Positioning aligning the dvb t antenna](/views2/1020519/page14/bge.png)
- 14
Positioning/aligning the DVB-T antenna
If you receive one or more DVB-T stations with picture or sound interfer-
ence, you should change the position and alignment of the antenna. Ask
your dealer to tell you which channels are used to broadcast the DVB-T
stations in your region.
➠ In normal TV mode, without other displays.
A DVB-T station is received and selected.
Call TV menu.
Select Settings,
go to the menu line below.
Select Stations,
go to the menu line below.
Select Manual adjustment,
OK call manual adjustment.
The signal source is already on DVB-T due to the station
preselection.
Position and align the antenna in such a manner that
maximum values for C/N and Level are obtained.
Blue button: Start search.
Search for DVB-T stations one after another and compare
values for C/N and Level.
Then position/align the antenna to the weakest station
so that maximum values for C/N and Level are obtained.
Thereafter perform an automatic search for all DVB-T
stations, see page 24.
Explanation of the setting possibilities:
Depending on the selected channel and country the
associated bandwidth of 7 or 8 MHz will be set auto-
matically.
If you have logged in and connected a recorder in the
connection wizard, the Digital Link Plus transmission
starts when the sound component wizard closes. If a
Digital Link Plus compatible recorder is connected, the
station list of the analogue stations is transmitted to the
external recorder.
You can also call Digital Link Plus manually under TV menu
→ Connections → Digital Link Plus.
Explanations of the DVB-T antenna:
With good reception conditions a room antenna can be
used for DVB-T (socket ANT2).
Under less favourable reception conditions, an active
antenna is recommended which must be set accordingly
in the first time commissioning or in the TV menu → Con-
nections → Antenna DVB → Antenna DVB-T (see DVB-T
antenna on page 13).
If the location is outside of the normal transmission range
then a directional antenna can be used to improve recep-
tion quality.
Initial installation
END
INFO
Manual adjustment
SIgnal source DVB-T DVB-C DVB-S A
Channel E05
Frequency 177.50 MHz
Bandwidth 7 MHz
Name 12 Test
C/N 81
Level 80
BER 0 E-7
Overwrite station
Search
Signal source
Select the area in which you want the broadcaster to search here. You can
use the button to automatically select station by station.
Bandwidth
Digital Link
Plus
Room
antenna
Active
antenna
Unidirectional
antenna
33156_024_Xelos_A32_42_GB_9_00_B14 1433156_024_Xelos_A32_42_GB_9_00_B14 14 03.07.2008 15:36:5003.07.2008 15:36:50
Содержание
- Operating instructions p.1
- Contents p.2
- Remote control tv functions p.3
- Control unit front side of the device p.4
- Radio only for dvb reception provided the station broadcasts this otherwise switch over to an audio input p.4
- Only with integrated digital recorder p.4
- Factory settings av1 dvd player av2 dvd recorder p.5
- Connections rear side of the device xelos a 32 37 p.5
- Before you connect other devices or make any changes please start the connection wizard page 40 and the sound components wizard page 47 and then follow the instructions that are displayed on the tv set p.5
- You can change this during the ini tial installation page 12 or in the connection wizard page 40 p.5
- You can change this during the ini tial installation page 12 or in the connection wizard page 40 before you connect other devices or make any changes please start the connection wizard page 40 and the sound components wizard page 47 and then follow the instructions that are displayed on the tv set p.6
- Factory settings av1 dvd player av2 dvd recorder p.6
- Connections rear side of the device xelos a 42 p.6
- Welcome p.7
- You will find the connection wizard in the tv menu under connection p.8
- You can return to the previous step or exit the wizard at any time p.8
- Welcome p.8
- The wizards in overview p.8
- Operating convenience with wizards p.8
- Info display and tv index p.8
- If after the initial installation you want to search for new stations or if you have set up your antenna for the first time then you can handle this task with the help of the search wizard see page 24 you will find the search wizard in the tv menu under setting p.8
- For your safety p.9
- For your safety p.10
- Environmental protection p.10
- Connecting the tv set p.11
- Preparing the remote control unit p.11
- Installing the tv set p.11
- Initial installation p.11
- Use this button to go back one step p.12
- Or assist button assist menu is called p.12
- Turning the set on off p.12
- Meaning of the display colour red standby mode green tv set is switched on orange radio mode tv set receives epg data or timer recording active p.12
- The first step with the wizard starts when selecting the language for the user prompts from this point on follow the instructions on your tv set p.12
- Initial installation after switching on for the first time this wizard starts automatically after the set is switched on for the first time however it can also be called later manually in the tv index see repeat initial installation on page 16 p.12
- Switching the tv set to standby mode p.12
- Initial installation p.12
- Switching the tv on off on the control unit p.12
- First installation wizard p.12
- Switching the set on with the remote control p.12
- Exit the wizard with the end button if available p.12
- Switching the set off with the remote control p.12
- Display p.12
- Switch on in radio mode p.12
- Continued on next page p.12
- Press the ring up down left right to move the cursor and to select settings p.12
- By pressing the ok button a setting is confirmed and you will go to the next step p.12
- Press the on off button in the middle for about 2 seconds to switch the tv set on off p.12
- Brief explanation of button functions p.12
- Press the on off button p.12
- Before switching off the set with the mains switch we recommend you to switch it to standby mode p.12
- An example of multiple selection using the yellow button p.12
- Press r on the tv control unit p.12
- Activate the mains switch on the back bottom of the set the display in the control panel on the front of the set will be illuminated red the set is now in standby mode p.12
- Or tv button p.12
- Or press the radio button on the remote control radio mode see page 34 p.12
- Or ok button station list is called p.12
- With the yellow button you can select or remove the indi vidual items see the example below when an element is selected it is marked by a checkmark p.12
- Or numeric buttons 0 99 p.12
- Initial installation p.13
- Positioning aligning the dvb t antenna p.14
- Initial installation p.14
- The info display p.15
- Operating convenience p.15
- General information on menu operation p.15
- The index in the tv set p.16
- The assist menu p.16
- Operating convenience p.16
- Settings p.17
- Recordin p.17
- Radio menu overview diagram p.17
- Radio menu p.17
- Picture sound connections p.17
- Operating convenience p.17
- Tv menu overview diagram p.17
- Tv menu p.17
- Sound stations timer functions p.17
- Mark stations ok the marked station is called p.18
- Mark stations p.18
- Jump to the next station block p.18
- In normal tv mode without other displays no favour ites selected p.18
- If favourites are selected you can switch to the station in the favourites list with the numeric buttons see page 19 maximum two digit station numbers are possible p.18
- You can switch back and forth quickly between two stations using these buttons p.18
- If favourites are selected the station in the favourites list is switched over with p p see page 19 if other languages or dvb subtitles are available on dvb stations the language and subtitle selection is displayed under the station display see also 23 additional selection possibilities for dvb stations p.18
- With the station list p.18
- Enter initial letters with the numeric buttons like with a mobile phone keypad see page 15 the first station for the specified letters is marked p.18
- With the numeric keys of the remote control p.18
- Digit stations press all four numeric buttons the station changes imme diately p.18
- With the keys p and p on the remote control p.18
- Digit stations keep the numeric button pressed for one second the station changes immediately or press numeric button briefly the station changes after 2 seconds immediate change for up to 9 stored stations p.18
- When you select an empty memory location the tv switches to the next available station p.18
- Digit and 3 digit stations press first and second numeric button briefly keep the last numeric button pressed for one second the station changes immediately or press all the numeric buttons briefly the station changes after 2 seconds changes immediately in case of up to 99 or 999 stored stations p.18
- Select station p.18
- Daily operation p.18
- P p station up down the station display with sound identification is displayed briefly p.18
- Call last viewed station for tv sets with mheg 5 software p.18
- P p scroll in the pages of the station list p.18
- Blue button changes the sorting between numerically and alphabetically p.18
- Or enter the number of the station with the numeric buttons the marked station is shown as a small picture p.18
- Ok the marked station is called p.18
- Ok call station list p.18
- Select video source p.19
- Explanation of the icons following station names digital dvb t station terrestrial via antenna digital dvb c station via cable digital dvb s station via satellite coded station p.19
- Select station directly with numeric buttons or p.19
- Explanation of the favourites lists the selection made with the red button favourites list is retained until you switch back to the station list with the red button if favourites are selected the name of the favourites list appears in the status display after the station name after changing stations p.19
- Select other favourites list p.19
- Daily operation p.19
- Select desired device or connection ok switch over p.19
- Call av selection p.19
- Select connection device ok switch over p.19
- A signal from the selected video source should now be visible p.19
- Red button calls the favourites list p.19
- Red button back to the station list green button scan all stations of the currently selected favourites list yellow button change the favourites lists see page 27 p.19
- Please ensure that the appropriate devices have also been registered with the connection wizard see page 40 p.19
- P p scroll in the pages of the favourites list p.19
- Other favourites lists can only be selected if these contain stations p.19
- Ok the marked station is called p.19
- Ok calls the station list p.19
- You can save and call your favourite stations in 6 favourites lists e g for multiple users each favourites list can contain up to 99 stations after initial installation 10 stations from the station list are already stored in the first list change the favourites list to suit your requirements see put together change favourites lists on page 27 p.19
- Ok call the station list if the favourites list is displayed switch to the station list first p.19
- With the station list p.19
- Mark stations p.19
- With the favourites lists p.19
- In numerical sorting the connections or devices are always at the beginning of the list in alphabetic sorting the connections or devices are sorted in alphabetically p.19
- With the av selection p.19
- In normal tv mode without other displays p.19
- Daily operation p.20
- Adjusting the sound p.20
- Operation without remote control p.21
- Daily operation p.21
- Adjusting the picture p.21
- Daily operation p.22
- Button functions p.22
- Daily operation p.23
- Tv stations p.24
- Managing stations p.24
- Managing stations p.25
- Call tv menu p.26
- Select change stations ok call list of stations p.26
- Restore stations stations which have been deleted from the station list can be restored p.26
- Rename station p.26
- Red button starts delete station select several stations to be deleted if necessary ok to execute the delete p.26
- Ok to save new name p.26
- Not possible for mheg 5 stations stations can only be resorted within the signal source block p.26
- Not possible for mheg 5 stations dvb stations which also transmit the station name cannot be renamed in this case the rename function is hidden p.26
- Move station change order p.26
- Managing stations p.26
- Yellow button starts move station mark several stations if needed ok selection ended select insertion position from which the selected stations are to be inserted ok to execute the move p.26
- In this menu you can delete move rename or restore stations or numeric buttons select the appropriate station scroll with p p if necessary p.26
- Under the 1st letter of the name you will see a line indicating the current input position input position one character to the right also for blanks input position one character to the left deletes the character p.26
- Green button switch upper lower case letters p.26
- The restored station is sorted in according to its signal source at the end of the respective signal bloc p.26
- Green button starts restore stations p.26
- Station p.26
- Enter the letters one after another with the numeric buttons on the remote control like using a mobile phone keypad press a numeric button until the desired charac ter appears the available letters are printed respectively on the buttons different special characters can be selected with button 1 p.26
- Select stations go to the menu line below p.26
- Delete station p.26
- Select station o p.26
- Change station can also be called via the station list page 18 p.26
- Select settings go to the menu line below p.26
- Change delete move rename restore station p.26
- Select select change favourites ok calls list of all stations and last active favourites list p.27
- Favourites list right column must be selected if not change the list with p.27
- Select insertion position at which the selected station is to be inserted p.27
- Enter the initial letters in case of alpha betical station orde p.27
- Rename favourites list p.27
- Each favourites list can contain up to 99 stations you can put together the favourites lists to suit your requirements e g topic lists other persons using this tv set can create their own favourites lists the favourites lists also have the advantage that the stations of different signal sources can be stored in the order you wish p.27
- Red button starts clear favourites list p.27
- Delete station from favourites list p.27
- Put together change favourites list p.27
- Change favourites can also be called via the favourites list page 19 p.27
- P p scroll in the pages of the station list if necessary p.27
- Call tv menu p.27
- Ok transfers the station to the favourites list the new station is inserted at the end of the favour ites list proceed in the same manner with addi tional stations p.27
- Blue button starts rename favourites list p.27
- Ok to save new name p.27
- All stations left column must be selected if not change the list with p.27
- Ok to execute the move p.27
- Add station to favourites list p.27
- Ok confirms clear favourites list p.27
- Numeric buttons enter new name same procedure as under rename station see page 26 p.27
- Move change order of stations in the favourites list p.27
- Yellow button starts move station p.27
- Mark station to be moved p.27
- The insertion position can also be selected with the numeric buttons p.27
- Mark station to be deleted ok removes the marked station from the favourites list p.27
- Select stations go to the menu line below p.27
- Managing stations p.27
- Select settings go to the menu line below p.27
- Green button select the next favourites list p.27
- Picture in picture pip p.28
- Picture in picture p.28
- Picture in picture p.29
- Configure picture in picture pip mode p.29
- Electronic programme guide epg p.30
- Electronic programme guide p.30
- Electronic programme guide p.31
- Configuring epg p.31
- _024_xelos_a32_42_gb_9_00_b32 32 33156_024_xelos_a32_42_gb_9_00_b32 32 03 7 008 15 38 26 03 7 008 15 38 26 p.32
- Teletext p.32
- Teletext p.33
- Digital teletext mheg 5 p.33
- Teletext menu p.33
- Radio mode p.34
- Epg electronic programme guide radio p.34
- Conditional access module ca module p.35
- Software update p.36
- Timer functions p.38
- Parental lock p.38
- Other settings p.38
- Time and date p.39
- Other settings p.39
- On screen displays p.39
- Connection wizard p.40
- Connection diagram p.40
- Call tv menu p.40
- Yellow button connect disconnect equipment p.40
- Av equipment selection p.40
- The connection wizard serves to connect accessory equipment optimally to the tv set make changes to the wiring of the devices or remove mo mentarily logged in equipment the exact process of the wizard depends on the choice of equipment p.40
- A camcorder camera is connected to the tv set additi onally in the following example p.40
- The connection wizard can be exited at any time with the end button p.40
- The connection diagram shows the currently logged in equipment p.40
- The connection diagram is displayed again connect the equipment to the corresponding connections of the tv set as shown in the connection diagram p.40
- The accessory equipment should be connected to the tv set with the power off disconnected from the mains see also the instructions in the operating manual of the equipment to be connected p.40
- Select the equipment you want to connect or remove equipment you no longer use in the av equipment selection p.40
- Select new devices modifications ok calls the wizard p.40
- Select equipment connection p.40
- Select connections go to the menu line below p.40
- Operating additional equipment p.40
- Ok proceed p.40
- New equipment should not be connected until it has been logged in in the connection wizard first dvd player on av1 and dvd recorder on av2 are preset at the factory p.40
- Operating additional equipment p.41
- Operating additional equipment p.42
- Devices to the connections av1 av2 avs p.42
- Operating additional equipment p.43
- Operating additional equipment p.44
- Devices to the hdmi dvi connections p.44
- Operating additional equipment p.45
- Devices to the pc in connection p.45
- Operating additional equipment p.46
- Devices to the component in connection p.46
- Sound components wizard p.47
- Play sound via tv speakers and active subwoofer p.47
- Play sound via active speakers p.47
- Operating additional equipment p.47
- Operating additional equipment p.48
- Connecting audio amplifiers p.48
- Operating additional equipment p.49
- Audio connection in hdmi dvi devices p.49
- Assignment of the digital audio input p.49
- Rs 232c interface upgradable interface p.49
- The direct way to record p.50
- Operating additional equipment p.50
- Timer recording with external devices p.51
- Operating additional equipment p.51
- Photoviewer p.52
- Operating additional equipment p.52
- Operating additional equipment p.53
- Operating loewe equipment p.54
- Operating additional equipment p.54
- 23 24 25 26 p.54
- 2 3 4 5 6 p.54
- Operating additional equipment p.55
- Rotating the tv set upgradable interface p.56
- Operating additional equipment p.56
- Troubleshooting p.57
- Troubleshooting p.58
- Technical data p.59
- General data p.59
- Electrical data p.59
- Connections max equipment p.59
- Setup possibilities p.60
- Accessories p.60
- Equipment variants and upgrade kits p.61
- Accessories p.61
- Glossary p.62
- Glossary p.63
- The code number 3001 cancels an access code and thus the parental lock please keep in a safe place p.64
- Glossary p.64
- Service p.66
Похожие устройства
-
Loewe BluTech VisionИнструкция по эксплуатации -
Loewe Art 32 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 47 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 42 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 37 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Spheros 20Инструкция по эксплуатации -
Loewe Xelos A 42Инструкция по эксплуатации -
Loewe Xelos A 37 Full-HD+ 100Инструкция по эксплуатации -
Loewe Xelos A 37Инструкция по эксплуатации -
Loewe Xelos A 32 Full-HD+ 100Инструкция по эксплуатации -
Loewe Xelos A 32Инструкция по эксплуатации -
Loewe Xelos A 26Инструкция по эксплуатации
Узнайте, как правильно позиционировать и настраивать DVB-T антенну для улучшения качества приема. Следуйте нашим рекомендациям для достижения максимального уровня сигнала.