Loewe Xelos A 42 HD+ 100 — важные инструкции по безопасности для телевизоров [9/66]
![Loewe Xelos A 42 HD+ 100 [9/66] For your safety](/views2/1020519/page9/bg9.png)
9 -
For your own safety and to prevent unnecessary damage to your device,
read and comply with the following safety instructions:
Proper use and environmental conditions
This TV set is intended exclusively for the reception and reproduction of
video and audio signals and designed for the home and office . It may
not be used in rooms with high humidity (e.g. bathrooms, saunas) or
high dust concentration (e.g. workshops ). The manufacturer‘s warranty is
only valid for use in the specified permissible environment.
If the set is used outdoors then ensure that it is protected against mois-
ture (rain, splashing water, or dew). High humidity and dust concentration
cause creep currents in the set . This can cause electric shocks or fires .
If you have brought the set into a
warm environment from the cold, then
wait for about 1 hour before switching
it on to avoid formation of condensa-
tion.
Do not place any objects filled with
liquid or burning candles on the de-
vice. Protect the set against dripping
and splashing water.
Never place the TV set in a position
where it is exposed to vibrations. This
can lead to material overload.
Transporting
Only transport the device in vertical position. Grasp the device on the
upper and lower edges of the housing.
The LCD screen is made of glass or plastic and can break if not handled
properly.
If the LCD screen is damaged and liquid crystal is leaking, wear rubber
gloves for handling the TV set. If there is skin contact immediately wash
thoroughly with water.
Power supply
The wrong voltage can damage the set. This equipment must only be
connected to a mains power supply which has the same voltage and
frequency as that specified on the rating plate; use the power cable
provided. The mains plug of the TV set must be easily accessible so that
the device can be disconnected from the mains at any time. When you
unplug the mains plug, do not pull on the cable rather pull on the plug
housing. The cable in the mains plug could be damaged and cause a
short circuit the next time it is plugged in.
Lay out the power cable in such a manner that it cannot be damaged.
The power cable may not be kinked or laid over sharp edges, stepped
on or exposed to che mi cals ; The latter also applies for the entire equip-
ment. A power cable with damaged insulation can cause electrical shock
and is a fire hazard.
Air circulation and high temperatures
The vent slots on the rear panel of the set must always be kept free.
Please do not place newspapers or cloths on/over the TV.
At least 10 cm clearance must be
left at the sides and top for air
circulation if the TV set is placed or
hung in a cabinet or a shelf.
Like any electronic device, your TV
set requires air for cooling. Ob-
struction of the air circulation can
cause fires.
The set is suitable for different instal-
lation solutions. See the instructions
for assembly for the different instal-
lation solutions.
Stand the TV set with the table or floor stand only on a level, sturdy,
horizontal base. Particularly ensure that the set does not protrude to the
front when placed in or on pieces of furniture.
Set up the device where it is not exposed to direct sunlight and where it
is not exposed to additional warming through heating elements.
Prevent metal items, needles, paper clips, liquids, wax, or similar items,
from getting into the interior of the device through the vent slots in the
rear panel. Such objects can cause short circuits in the set, which could
possibly cause a fire.
If something should get into the interior of the set then immediately
unplug the mains plug of the device and contact customer service for
more information.
For your safety
10 cm
10 cm 10 cm
33156_024_Xelos_A32_42_GB_9_00_B9 933156_024_Xelos_A32_42_GB_9_00_B9 9 03.07.2008 15:36:3603.07.2008 15:36:36
Содержание
- Operating instructions p.1
- Contents p.2
- Remote control tv functions p.3
- Control unit front side of the device p.4
- Radio only for dvb reception provided the station broadcasts this otherwise switch over to an audio input p.4
- Only with integrated digital recorder p.4
- You can change this during the ini tial installation page 12 or in the connection wizard page 40 p.5
- Factory settings av1 dvd player av2 dvd recorder p.5
- Connections rear side of the device xelos a 32 37 p.5
- Before you connect other devices or make any changes please start the connection wizard page 40 and the sound components wizard page 47 and then follow the instructions that are displayed on the tv set p.5
- You can change this during the ini tial installation page 12 or in the connection wizard page 40 before you connect other devices or make any changes please start the connection wizard page 40 and the sound components wizard page 47 and then follow the instructions that are displayed on the tv set p.6
- Factory settings av1 dvd player av2 dvd recorder p.6
- Connections rear side of the device xelos a 42 p.6
- Welcome p.7
- You can return to the previous step or exit the wizard at any time p.8
- Welcome p.8
- The wizards in overview p.8
- Operating convenience with wizards p.8
- Info display and tv index p.8
- If after the initial installation you want to search for new stations or if you have set up your antenna for the first time then you can handle this task with the help of the search wizard see page 24 you will find the search wizard in the tv menu under setting p.8
- You will find the connection wizard in the tv menu under connection p.8
- For your safety p.9
- For your safety p.10
- Environmental protection p.10
- Preparing the remote control unit p.11
- Installing the tv set p.11
- Initial installation p.11
- Connecting the tv set p.11
- Switching the set on with the remote control p.12
- Exit the wizard with the end button if available p.12
- Switching the set off with the remote control p.12
- Display p.12
- Switch on in radio mode p.12
- Continued on next page p.12
- Press the ring up down left right to move the cursor and to select settings p.12
- By pressing the ok button a setting is confirmed and you will go to the next step p.12
- Press the on off button in the middle for about 2 seconds to switch the tv set on off p.12
- Brief explanation of button functions p.12
- Press the on off button p.12
- Before switching off the set with the mains switch we recommend you to switch it to standby mode p.12
- Press r on the tv control unit p.12
- An example of multiple selection using the yellow button p.12
- Or tv button p.12
- Activate the mains switch on the back bottom of the set the display in the control panel on the front of the set will be illuminated red the set is now in standby mode p.12
- Or press the radio button on the remote control radio mode see page 34 p.12
- Or ok button station list is called p.12
- Or numeric buttons 0 99 p.12
- With the yellow button you can select or remove the indi vidual items see the example below when an element is selected it is marked by a checkmark p.12
- Use this button to go back one step p.12
- Or assist button assist menu is called p.12
- Turning the set on off p.12
- Meaning of the display colour red standby mode green tv set is switched on orange radio mode tv set receives epg data or timer recording active p.12
- The first step with the wizard starts when selecting the language for the user prompts from this point on follow the instructions on your tv set p.12
- Initial installation after switching on for the first time this wizard starts automatically after the set is switched on for the first time however it can also be called later manually in the tv index see repeat initial installation on page 16 p.12
- Switching the tv set to standby mode p.12
- Initial installation p.12
- Switching the tv on off on the control unit p.12
- First installation wizard p.12
- Initial installation p.13
- Positioning aligning the dvb t antenna p.14
- Initial installation p.14
- The info display p.15
- Operating convenience p.15
- General information on menu operation p.15
- The index in the tv set p.16
- The assist menu p.16
- Operating convenience p.16
- Operating convenience p.17
- Tv menu overview diagram p.17
- Tv menu p.17
- Sound stations timer functions p.17
- Settings p.17
- Recordin p.17
- Radio menu overview diagram p.17
- Radio menu p.17
- Picture sound connections p.17
- You can switch back and forth quickly between two stations using these buttons p.18
- If favourites are selected the station in the favourites list is switched over with p p see page 19 if other languages or dvb subtitles are available on dvb stations the language and subtitle selection is displayed under the station display see also 23 additional selection possibilities for dvb stations p.18
- With the station list p.18
- Enter initial letters with the numeric buttons like with a mobile phone keypad see page 15 the first station for the specified letters is marked p.18
- With the numeric keys of the remote control p.18
- Digit stations press all four numeric buttons the station changes imme diately p.18
- With the keys p and p on the remote control p.18
- Digit stations keep the numeric button pressed for one second the station changes immediately or press numeric button briefly the station changes after 2 seconds immediate change for up to 9 stored stations p.18
- When you select an empty memory location the tv switches to the next available station p.18
- Digit and 3 digit stations press first and second numeric button briefly keep the last numeric button pressed for one second the station changes immediately or press all the numeric buttons briefly the station changes after 2 seconds changes immediately in case of up to 99 or 999 stored stations p.18
- Select station p.18
- Daily operation p.18
- P p station up down the station display with sound identification is displayed briefly p.18
- Call last viewed station for tv sets with mheg 5 software p.18
- P p scroll in the pages of the station list p.18
- Blue button changes the sorting between numerically and alphabetically p.18
- Or enter the number of the station with the numeric buttons the marked station is shown as a small picture p.18
- Ok the marked station is called p.18
- Ok call station list p.18
- Mark stations ok the marked station is called p.18
- Mark stations p.18
- Jump to the next station block p.18
- In normal tv mode without other displays no favour ites selected p.18
- If favourites are selected you can switch to the station in the favourites list with the numeric buttons see page 19 maximum two digit station numbers are possible p.18
- Red button calls the favourites list p.19
- Red button back to the station list green button scan all stations of the currently selected favourites list yellow button change the favourites lists see page 27 p.19
- Please ensure that the appropriate devices have also been registered with the connection wizard see page 40 p.19
- P p scroll in the pages of the favourites list p.19
- Other favourites lists can only be selected if these contain stations p.19
- Ok the marked station is called p.19
- Ok calls the station list p.19
- Ok call the station list if the favourites list is displayed switch to the station list first p.19
- You can save and call your favourite stations in 6 favourites lists e g for multiple users each favourites list can contain up to 99 stations after initial installation 10 stations from the station list are already stored in the first list change the favourites list to suit your requirements see put together change favourites lists on page 27 p.19
- Mark stations p.19
- With the station list p.19
- In numerical sorting the connections or devices are always at the beginning of the list in alphabetic sorting the connections or devices are sorted in alphabetically p.19
- With the favourites lists p.19
- With the av selection p.19
- In normal tv mode without other displays p.19
- Select video source p.19
- Explanation of the icons following station names digital dvb t station terrestrial via antenna digital dvb c station via cable digital dvb s station via satellite coded station p.19
- Select station directly with numeric buttons or p.19
- Explanation of the favourites lists the selection made with the red button favourites list is retained until you switch back to the station list with the red button if favourites are selected the name of the favourites list appears in the status display after the station name after changing stations p.19
- Select other favourites list p.19
- Daily operation p.19
- Select desired device or connection ok switch over p.19
- Call av selection p.19
- Select connection device ok switch over p.19
- A signal from the selected video source should now be visible p.19
- Daily operation p.20
- Adjusting the sound p.20
- Operation without remote control p.21
- Daily operation p.21
- Adjusting the picture p.21
- Daily operation p.22
- Button functions p.22
- Daily operation p.23
- Tv stations p.24
- Managing stations p.24
- Managing stations p.25
- Not possible for mheg 5 stations stations can only be resorted within the signal source block p.26
- Not possible for mheg 5 stations dvb stations which also transmit the station name cannot be renamed in this case the rename function is hidden p.26
- Move station change order p.26
- Managing stations p.26
- Yellow button starts move station mark several stations if needed ok selection ended select insertion position from which the selected stations are to be inserted ok to execute the move p.26
- In this menu you can delete move rename or restore stations or numeric buttons select the appropriate station scroll with p p if necessary p.26
- Under the 1st letter of the name you will see a line indicating the current input position input position one character to the right also for blanks input position one character to the left deletes the character p.26
- Green button switch upper lower case letters p.26
- The restored station is sorted in according to its signal source at the end of the respective signal bloc p.26
- Green button starts restore stations p.26
- Station p.26
- Enter the letters one after another with the numeric buttons on the remote control like using a mobile phone keypad press a numeric button until the desired charac ter appears the available letters are printed respectively on the buttons different special characters can be selected with button 1 p.26
- Select stations go to the menu line below p.26
- Delete station p.26
- Select station o p.26
- Change station can also be called via the station list page 18 p.26
- Select settings go to the menu line below p.26
- Change delete move rename restore station p.26
- Select change stations ok call list of stations p.26
- Call tv menu p.26
- Restore stations stations which have been deleted from the station list can be restored p.26
- Rename station p.26
- Red button starts delete station select several stations to be deleted if necessary ok to execute the delete p.26
- Ok to save new name p.26
- P p scroll in the pages of the station list if necessary p.27
- Call tv menu p.27
- Ok transfers the station to the favourites list the new station is inserted at the end of the favour ites list proceed in the same manner with addi tional stations p.27
- Blue button starts rename favourites list p.27
- Ok to save new name p.27
- All stations left column must be selected if not change the list with p.27
- Ok to execute the move p.27
- Add station to favourites list p.27
- Ok confirms clear favourites list p.27
- Numeric buttons enter new name same procedure as under rename station see page 26 p.27
- Move change order of stations in the favourites list p.27
- Mark station to be moved p.27
- Yellow button starts move station p.27
- Mark station to be deleted ok removes the marked station from the favourites list p.27
- The insertion position can also be selected with the numeric buttons p.27
- Managing stations p.27
- Select stations go to the menu line below p.27
- Select settings go to the menu line below p.27
- Green button select the next favourites list p.27
- Select select change favourites ok calls list of all stations and last active favourites list p.27
- Favourites list right column must be selected if not change the list with p.27
- Select insertion position at which the selected station is to be inserted p.27
- Enter the initial letters in case of alpha betical station orde p.27
- Rename favourites list p.27
- Each favourites list can contain up to 99 stations you can put together the favourites lists to suit your requirements e g topic lists other persons using this tv set can create their own favourites lists the favourites lists also have the advantage that the stations of different signal sources can be stored in the order you wish p.27
- Red button starts clear favourites list p.27
- Delete station from favourites list p.27
- Put together change favourites list p.27
- Change favourites can also be called via the favourites list page 19 p.27
- Picture in picture pip p.28
- Picture in picture p.28
- Picture in picture p.29
- Configure picture in picture pip mode p.29
- Electronic programme guide epg p.30
- Electronic programme guide p.30
- Configuring epg p.31
- Electronic programme guide p.31
- _024_xelos_a32_42_gb_9_00_b32 32 33156_024_xelos_a32_42_gb_9_00_b32 32 03 7 008 15 38 26 03 7 008 15 38 26 p.32
- Teletext p.32
- Teletext menu p.33
- Teletext p.33
- Digital teletext mheg 5 p.33
- Radio mode p.34
- Epg electronic programme guide radio p.34
- Conditional access module ca module p.35
- Software update p.36
- Timer functions p.38
- Parental lock p.38
- Other settings p.38
- Time and date p.39
- Other settings p.39
- On screen displays p.39
- The connection wizard can be exited at any time with the end button p.40
- The connection diagram shows the currently logged in equipment p.40
- The connection diagram is displayed again connect the equipment to the corresponding connections of the tv set as shown in the connection diagram p.40
- The accessory equipment should be connected to the tv set with the power off disconnected from the mains see also the instructions in the operating manual of the equipment to be connected p.40
- Select the equipment you want to connect or remove equipment you no longer use in the av equipment selection p.40
- Select new devices modifications ok calls the wizard p.40
- Select equipment connection p.40
- Select connections go to the menu line below p.40
- Operating additional equipment p.40
- Ok proceed p.40
- New equipment should not be connected until it has been logged in in the connection wizard first dvd player on av1 and dvd recorder on av2 are preset at the factory p.40
- Connection wizard p.40
- Connection diagram p.40
- Call tv menu p.40
- Av equipment selection p.40
- Yellow button connect disconnect equipment p.40
- The connection wizard serves to connect accessory equipment optimally to the tv set make changes to the wiring of the devices or remove mo mentarily logged in equipment the exact process of the wizard depends on the choice of equipment p.40
- A camcorder camera is connected to the tv set additi onally in the following example p.40
- Operating additional equipment p.41
- Operating additional equipment p.42
- Devices to the connections av1 av2 avs p.42
- Operating additional equipment p.43
- Operating additional equipment p.44
- Devices to the hdmi dvi connections p.44
- Operating additional equipment p.45
- Devices to the pc in connection p.45
- Operating additional equipment p.46
- Devices to the component in connection p.46
- Sound components wizard p.47
- Play sound via tv speakers and active subwoofer p.47
- Play sound via active speakers p.47
- Operating additional equipment p.47
- Operating additional equipment p.48
- Connecting audio amplifiers p.48
- Rs 232c interface upgradable interface p.49
- Operating additional equipment p.49
- Audio connection in hdmi dvi devices p.49
- Assignment of the digital audio input p.49
- The direct way to record p.50
- Operating additional equipment p.50
- Timer recording with external devices p.51
- Operating additional equipment p.51
- Photoviewer p.52
- Operating additional equipment p.52
- Operating additional equipment p.53
- Operating additional equipment p.54
- 23 24 25 26 p.54
- 2 3 4 5 6 p.54
- Operating loewe equipment p.54
- Operating additional equipment p.55
- Rotating the tv set upgradable interface p.56
- Operating additional equipment p.56
- Troubleshooting p.57
- Troubleshooting p.58
- Technical data p.59
- General data p.59
- Electrical data p.59
- Connections max equipment p.59
- Setup possibilities p.60
- Accessories p.60
- Equipment variants and upgrade kits p.61
- Accessories p.61
- Glossary p.62
- Glossary p.63
- The code number 3001 cancels an access code and thus the parental lock please keep in a safe place p.64
- Glossary p.64
- Service p.66
Похожие устройства
-
Loewe BluTech VisionИнструкция по эксплуатации -
Loewe Art 32 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 47 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 42 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Art 37 SL Full-HD+ 100Инструкция по эксплуатации -
Loewe Spheros 20Инструкция по эксплуатации -
Loewe Xelos A 42Инструкция по эксплуатации -
Loewe Xelos A 37 Full-HD+ 100Инструкция по эксплуатации -
Loewe Xelos A 37Инструкция по эксплуатации -
Loewe Xelos A 32 Full-HD+ 100Инструкция по эксплуатации -
Loewe Xelos A 32Инструкция по эксплуатации -
Loewe Xelos A 26Инструкция по эксплуатации
Следуйте этим важным инструкциям по безопасности для вашего телевизора, чтобы избежать повреждений и обеспечить долгую работу устройства. Узнайте о правильном использовании и условиях эксплуатации.