Dewalt D28886 [18/80] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Dewalt D28886 [18/80] English

Dewalt D28886 [18/80] English
18
ENGLISH
Safety instructions
When using power tools, always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and
personal injury.
Read all of this manual carefully before operating
the tool.
Save this manual for future reference.
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Do not expose the tool to rain. Do not use the tool
in damp or wet conditions. Keep the work area
well lit (250 - 300 Lux). Do not use the tool where
there is a risk of causing fire or explosion, e.g. in
the presence of flammable liquids and gases.
3 Keep children away
Do not allow children, visitors or animals to come
near the work area or to touch the tool or the
mains cable.
4 Dress properly
Do not wear loose clothing or jewellery, as these
can be caught in moving parts. Wear protective
hair covering to keep long hair out of the way.
When working outdoors, preferably wear suitable
gloves and non-slip footwear.
5 Personal protection
Always use safety glasses. Use a face or dust
mask whenever the operations may produce
dust or flying particles. If these particles might be
considerably hot, also wear a heat-resistant
apron. Wear ear protection at all times. Wear a
safety helmet at all times.
6 Guard against electric shock
Prevent body contact with earthed surfaces
(e.g. pipes, radiators, cookers and refrigerators).
When using the tool under extreme conditions
(e.g. high humidity, when metal swarf is being
produced, etc.), electric safety can be improved
by inserting an isolating transformer or a (FI)
earth-leakage circuit-breaker.
7 Do not overreach
Keep proper footing and balance at all times.
8 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
9 Secure workpiece
Use clamps or a vice to hold the workpiece. It is
safer and it frees both hands to operate the tool.
10 Connect dust extraction equipment
If devices are provided for the connection of dust
extraction and collection facilities, ensure that
these are connected and properly used.
11 Remove adjusting keys and wrenches
Always check that adjusting keys and wrenches
are removed from the tool before operating the
tool.
12 Extension cables
Before use, inspect the extension cable and
replace if damaged. When using the tool
outdoors, only use extension cables intended for
outdoor use and marked accordingly.
13 Use appropriate tool
The intended use is described in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which it
was intended. Do not force the tool.
Warning! The use of any accessory or attachment
or performance of any operation with thistool
other than those recommended in this instruction
manual may present a risk of personal injury.
14 Check for damaged parts
Before use, carefully check the tool and mains
cable for damage. Check for misalignment and
seizure of moving parts, breakage of parts, damage
to guards and switches and any other conditions
that may affect its operation. Ensure that the tool
will operate properly and perform its intended
function. Do not use the tool if any part is damaged
or defective. Do not use the tool if the switch does
not turn it on and off. Have any damaged or
defective parts replaced by an authorised DEWALT
repair agent. Never attempt any repairs yourself.
15 Unplug tool
Switch off and wait for the tool to come to a
complete standstill before leaving it unattended.
Unplug the tool when not in use, before changing
any parts of the tools, accessories or
attachments and before servicing.
16 Avoid unintentional starting
Do not carry the tool with a finger on the switch.
Be sure that the tool is switched off before
plugging in.

Содержание

Похожие устройства

ENGLISH Safety instructions When using power tools always observe the safety regulations applicable in your country to reduce the risk of fire electric shock and 9 Secure workpiece Use clamps or a vice to hold the workpiece It is safer and it frees both hands to operate the tool 10 Connect dust extraction equipment personal injury If devices are provided for the connection of dust Read all of this manual carefully before operating extraction and collection facilities ensure that the tool Save this manual for future reference these are connected and properly used 11 Remove adjusting keys and wrenches Always check that adjusting keys and wrenches General are removed from the tool before operating the tool 1 Keep work area clean Cluttered areas and benches can cause accidents 2 Consider work area environment Do not expose the tool to rain Do not use the tool in damp or wet conditions Keep the work area well lit 250 300 Lux Do not use the tool where Before use inspect the extension cable and replace if damaged When using the tool outdoors only use extension cables intended for outdoor use and marked accordingly 13 Use appropriate tool there is a risk of causing fire or explosion e g in The intended use is described in this instruction the presence of flammable liquids and gases manual Do not force small tools or attachments 3 Keep children away to do the job of a heavy duty tool The tool will Do not allow children visitors or animals to come do the job better and safer at the rate for which it near the work area or to touch the tool or the was intended Do not force the tool mains cable Warning The use of any accessory or attachment 4 Dress properly Do not wear loose clothing or jewellery as these can be caught in moving parts Wear protective hair covering to keep long hair out of the way or performance of any operation with thistool other than those recommended in this instruction manual may present a risk of personal injury 14 Check for damaged parts When working outdoors preferably wear suitable Before use carefully check the tool and mains gloves and non slip footwear cable for damage Check for misalignment and 5 Personal protection Always use safety glasses Use a face or dust seizure of moving parts breakage of parts damage to guards and switches and any other conditions mask whenever the operations may produce that may affect its operation Ensure that the tool dust or flying particles If these particles might be will operate properly and perform its intended considerably hot also wear a heat resistant function Do not use the tool if any part is damaged apron Wear ear protection at all times Wear a or defective Do not use the tool if the switch does safety helmet at all times not turn it on and off Have any damaged or 6 Guard against electric shock Prevent body contact with earthed surfaces e g pipes radiators cookers and refrigerators defective parts replaced by an authorised DEWALT repair agent Never attempt any repairs yourself 15 Unplug tool When using the tool under extreme conditions Switch off and wait for the tool to come to a e g high humidity when metal swarf is being complete standstill before leaving it unattended produced etc electric safety can be improved Unplug the tool when not in use before changing by inserting an isolating transformer or a Fl any parts of the tools accessories or earth leakage circuit breaker 7 Do not overreach Keep proper footing and balance at all times 8 Stay alert Watch what you are doing Use common sense Do not operate the tool when you are tired 18 12 Extension cables attachments and before servicing 16 Avoid unintentional starting Do not carry the tool with a finger on the switch Be sure that the tool is switched off before plugging in

Скачать