Home
Главная
Dewalt
Перфораторы
D28886
Инструкция по эксплуатации Страница: 20

Dewalt D28886 [20/80] Assembly and adjustment

Dewalt D28886 [20/80] Assembly and adjustment

20

ENGLISH

Your DEWALT tool is double insulated in

accordance with EN 50144; therefore no

earth wire is required.

Mains plug replacement

(U.K. & Ireland only)

• Should your mains plug need replacing and you

are competent to do this, proceed as instructed

below. If you are in doubt, contact an authorized

DEWALT repair agent or a qualified electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug

with bared copper conductors is dangerous if

engaged in a live socket outlet.

• Only fit 13 Amperes BS1363A approved plugs

fitted with the correctly rated fuse (1).

• The cable wire colours, or a letter, will be marked

at the connection points of most good quality

plugs. Attach the wires to their respective points

in the plug (see below). Brown is for Live (L) (2)

and Blue is for Neutral (N) (4).

• Before replacing the top cover of the mains plug

ensure that the cable restraint (3) is holding the

outer sheath of the cable firmly and that the two

leads are correctly fixed at the terminal screws.

Never use a light socket.

Never connect the live (L) or neutral (N)

wires to the earth pin marked E or .

For 115 V units with a power rating exceeding 1500 W,

we recommend to fit a plug to BS4343 standard.

Using an extension cable

If an extension cable is required, use an approved

extension cable suitable for the power input of this

tool (see technical data). The minimum conductor

size is 1.5 mm

2

.

When using a cable reel, always unwind the cable

completely.

Also refer to the table below.

Conductor size (mm

2

) Cable rating (Amperes)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Cable length (m)

7.5 15 25 30 45 60

Voltage Amperes Cable rating (Amperes)

115 0-2.0 66 66 610

2.1 - 3.4 6 6 6 6 15 15

3.5 - 5.0 6 6 10 15 20 20

5.1 - 7.0 10 10 15 20 20 25

7.1 - 12.0 15 15 20 25 25 -

12.1 - 20.0 20 20 25 - - -

230 0 - 2.0 6 6 6 6 6 6

2.1 - 3.4 6 6 6 6 6 6

3.5 - 5.0 6 6 6 6 10 15

5.1 - 7.0 10 10 10 10 15 15

7.1 - 12.0 15 15 15 15 20 20

12.1 - 20.0 20 20 20 20 25 -

Assembly and adjustment

Prior to assembly and adjustment always

unplug the tool.

Mounting an accessory (fig. B, C & D)

D28885 (fig. B)

• Hold the spindle (6) using the 13 mm spanner

provided.

• Loosen the collet nut (4) by turning it

counterclockwise.

• Insert the shank of the accessory into the collet (7).

• Securely tighten the collet using the 19 mm

spanner provided.

• To remove the accessory, proceed in reverse

order.

D28886 (fig. C)

• Press the spindle lock (3) and rotate the spindle

(6) until it locks in position.

• Loosen the collet nut (4) by turning it

counterclockwise.

• Insert the shank of the accessory into the collet (7).

Содержание

Похожие устройства

ENGLISH Your DEWALT tool is double insulated in Also refer to the table below accordance with EN 50144 therefore no earth wire is required Mains plug replacement U K Ireland only Conductor size mm2 Cable rating Amperes 0 75 6 1 00 10 1 50 15 Should your mains plug need replacing and you 2 50 20 are competent to do this proceed as instructed 4 00 25 below If you are in doubt contact an authorized Cable length m DEWALT repair agent or a qualified electrician 7 5 Disconnect the plug from the supply Voltage Cut off the plug and dispose of it safely a plug 115 Amperes 15 25 30 45 60 10 Cable rating Amperes 0 2 0 6 6 6 6 6 with bared copper conductors is dangerous if 2 1 3 4 6 6 6 6 15 15 engaged in a live socket outlet 3 5 5 0 6 6 10 15 20 20 5 1 7 0 10 10 15 20 20 25 7 1 12 0 15 15 20 25 25 12 1 20 0 20 20 25 6 Only fit 13 Amperes BS1363A approved plugs fitted with the correctly rated fuse 1 The cable wire colours or a letter will be marked at the connection points of most good quality 0 2 0 6 6 6 6 6 plugs Attach the wires to their respective points 230 2 1 3 4 6 6 6 6 6 6 in the plug see below Brown is for Live L 2 3 5 5 0 6 6 6 6 10 15 and Blue is for Neutral N 4 5 1 7 0 10 10 10 10 15 15 7 1 12 0 15 15 15 15 20 20 20 20 20 20 25 Before replacing the top cover of the mains plug ensure that the cable restraint 3 is holding the 12 1 20 0 outer sheath of the cable firmly and that the two leads are correctly fixed at the terminal screws Assembly and adjustment A Prior to assembly and adjustment always unplug the tool Mounting an accessory fig B C D D28885 fig B Hold the spindle 6 using the 13 mm spanner provided Loosen the collet nut 4 by turning it Never use a light socket counterclockwise Never connect the live L or neutral N Insert the shank of the accessory into the collet 7 wires to the earth pin marked E or X Securely tighten the collet using the 19 mm spanner provided For 115 V units with a power rating exceeding 1500 W we recommend to fit a plug to BS4343 standard Using an extension cable If an extension cable is required use an approved extension cable suitable for the power input of this tool see technical data The minimum conductor size is 1 5 mm2 When using a cable reel always unwind the cable completely 20 To remove the accessory proceed in reverse order D28886 fig C Press the spindle lock 3 and rotate the spindle 6 until it locks in position Loosen the collet nut 4 by turning it counterclockwise Insert the shank of the accessory into the collet 7