Dewalt D28886 [21/80] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Dewalt D28886 [21/80] English

Dewalt D28886 [21/80] English
21
ENGLISH
• Securely tighten the collet using the 19 mm
spanner provided.
• Release the spindle lock.
• To remove the accessory, proceed in reverse
order.
Always mount the accessory with the
required length X of the shank inserted in
the collet (fig. D).
Never tighten the collet nut without an
accessory in the collet.
D28886 - Setting the electronic speed control
dial (fig. A)
The speed is infinitely variable from 7,
000 - 27,000
min
-1
using the electronic speed control dial (5).
• Turn the electronic speed control dial to the
required level. The correct setting, however, is a
matter of experience.
• Generally, harder materials require a higher setting.
Instructions for use
Always observe the safety instructions
and applicable regulations.
Ensure all materials to be ground or cut are secured
in place.
Apply only a gentle pressure to the tool.
Avoid overloading. Should the tool become hot, let it
run a few minutes under no load condition.
Prior to operation:
• Install the appropriate accessory. Do not use
excessively worn accessories.
Switching on and off (fig. A)
• To run the tool, press the on/off switch (1) to the
front.
• For continuous operation, press down the front
end of the switch.
• To stop the tool, release the on/off switch.
• To stop the tool in continuous operation,
press the rear end of the on/off switch.
Holding the tool
• Always hold the tool with both hands.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your DEWALT power tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an authorized DEWALT repair
agent where it will be disposed of in an
environmentally safe way.

Содержание

Похожие устройства

ENGLISH Securely tighten the collet using the 19 mm spanner provided Consult your dealer for further information on the appropriate accessories Release the spindle lock To remove the accessory proceed in reverse order Maintenance Your DEWALT power tool has been designed to operate over a long period of time with a minimum Always mount the accessory with the A tA required length X of the shank inserted in of maintenance Continuous satisfactory operation depends upon proper tool care and regular cleaning the collet fig D Never tighten the collet nut without an Lubrication accessory in the collet Your power tool requires no additional lubrication D28886 Setting the electronic speed control dial fig A The speed is infinitely variable from 7 000 27 000 min using the electronic speed control dial 5 Turn the electronic speed control dial to the required level The correct setting however is a Cleaning Keep the ventilation slots clear and regularly clean the housing with a soft cloth matter of experience Generally harder materials require a higher setting Instructions for use Unwanted tools and the environment Take your tool to an authorized DEWALT repair Always A observe the safety instructions and applicable regulations agent where it will be disposed of in an environmentally safe way Ensure all materials to be ground or cut are secured in place Apply only a gentle pressure to the tool Avoid overloading Should the tool become hot let it run a few minutes under no load condition Prior to operation Install the appropriate accessory Do not use excessively worn accessories Switching on and off fig A To run the tool press the on off switch 1 to the front For continuous operation press down the front end of the switch To stop the tool release the on off switch To stop the tool in continuous operation press the rear end of the on off switch Holding the tool Always hold the tool with both hands 21

Скачать