Home
Главная
Vitek
Мультиварка
VT-4219 W
Инструкция по эксплуатации Страница: 7

Vitek VT-4219 W [7/40] English

E N G L I S H

BEFORE THE FIRST USE

After the unit transportation or storage at low

temperature it is necessary to keep it for at least

two hours at room temperature before switching

on.

– Unpack the unit, remove any stickers and package

materials that can prevent normal operation of the

multicooker.

– Place the unit on a flat, heat-resistant surface

away from all kitchen heat sources (gas cooker,

electric cooker or cooking unit).

– Place the multicooker keeping at least a 20 cm

gap between the multicooker body and the wall

and at least a 30-40 cm gap above the unit.

– Do not place the multicooker close to the objects

that can be damaged by the released steam of

high temperature.

Attention! Do not use the unit near bath tubs,

kitchen sinks or other containers filled with water.

– Open the lid (4) by pressing the button (5) and

pulling the handle (6).

– Wash all the removable parts - the bowl (12),

steam cooking basket (13), soup ladle (14), spat-

ula (15) and measuring cup (16), yogurt cups (22)

and small lids (23) - with a soft sponge with neutral

detergent, then rinse under running water and dry.

– Clean the unit body with a damp cloth, then wipe

it dry.

USING OF THE MULTICOOKER

– Place the food in the bowl following the recipe (see

“Recipe book”).

Note: Make sure that the ingredients and liquids level

does not exceed the maximal mark “1.8L” andthat it is

not lower than the minimal mark “0.6L”. Maximal level

mark for porridges (except rice) is «1.4L»

General example of loading products and water

(as an example rice is considered)

Measure rice with the measuring cup (16) (one mea-

suring cup is equal to approximately 160 grams of

rice), wash it and place in the casserole.

Add water up to the corresponding level.

For simplicity use the graduated scale in cups (CUP).

The scale has graduation, marking proportions of rice

and water.

Example: If you put four measuring cups of cereal,

pour water up to the mark of 4 cups (CUP).

For cooking thin milk porridges the recommended

proportion of rice and water is 1:3.

– Put the bowl (12) in the process chamber. Make

sure that the outer surface of the bowl (12) is

clean and dry, and the bowl itself (12) is placed

evenly and is in secure contact with heating ele-

ment (10) surface.

Notes:

– do not use the bowl (12) for washing cereals and

do not chop products in it, this can damage the

non-stick coating;

– make sure that there are no foreign objects, dirt or

moisture in the process chamber and on the bot-

tom of the bowl (12);

– wipe the outer surface and the bottom of the

bowl (12) dry before use;

– there is a temperature sensor (11) in the mid-

dle of the heating element (10); make sure that

nothing prevents free sensor movement.

– If you steam products, pour water into the bowl

(12) so that boiling water doesn’t reach the bot-

tom of the basket (13). Put the basket with food

(13) into the bowl (12).

– Close the lid (4) until click.

– Insert the power cord jack into the connector (9)

and the power cord plug into the socket. You will

hear a sound signal, the «8888» symb ols will light

up on the display (3) and the “Rice” cooking pro-

gram indicator will be flashing.

– Use the buttons (17) to select the desired auto-

cooking program, the cooking program indicator

will light up

Attention!

If you switched an auto-cooking program on by

pressing one of the buttons (17) without making

additional program settings, in 10 seconds you

will hear a sound signal and the multicooker will be

switched on in the selected food cooking mode.

– If necessary, enter the required cooking program

duration time, set the time by consequent pressing

of the buttons (18) «-/+», the numerical data will be

shown on the display (3).

Note: If you select the cooking program “Rice”, then

setting of the cooking duration time will be unavailable,

proceed to the next step of setting.

– Set the delayed start function, if necessary. For

this purpose press the “DELAYED START” button

(20) and then use the buttons (18) «-/+» to set the

time, after which cooking will be finished. If you

want to start cooking immediately, skip this step.

– Cooking will start automatically a few seconds af-

ter the setting is completed, the display will show

the operation remaining time (for all programs ex-

cept the “Rice” program).

– Sound signals will notify on finishing of cooking,

the unit will be automatically switched to the keep

warm mode (except for the “Yogurt” program), the

display (3) will show time of the multicooker opera-

tion in the keep warm mode.

– To cancel the keep warm mode, press the “OFF”

button (19).

VT-4219.indd 7 09.04.2014 16:50:30

Vitek VT-4219 W [7/40] English

Содержание

Похожие устройства