Gigabyte G1.Sniper Z6 [51/80] 6 peripherals

- 51 -

2-6 Peripherals

& Initial Display Output

 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIgraphicscard,PCIExpressgraphics

card or the onboard graphics.

IGFX   Setstheonboardgraphicsastherstdisplay.

PCIe1Slot SetsthegraphicscardonthePCIEX16slotastherstdisplay.(Default)

toxHCIorEHCIaccordingtosettingusedinpreviousboots(fornon-G3boot)inthe

pre-boot environment. This allows the use of USB 3.0 devices prior to OS boot. xHCI

controller enabling and rerouting should follow the steps in Auto, when previous boot

routsportstoEHCI.Note:ThisistherecommendedmodewhenBIOShasxHCIpre-

bootsupport.(Default)

Auto BIOS routes the sharable ports to EHCI controller. Then it uses ACPI protocols to

provideanoptiontoenablethexHCIcontrollerandreroutethesharableports.Note:

ThisistherecommendedmodewhenBIOSdoesNOThavexHCIpre-bootsupport.

Enabled All shared ports are eventually routed to the xHCI controller during the BIOS boot process.

If BIOS does not have pre-boot support for the xHCI controller, it should initially route