Supermicro SYS-1028R-WC1RT — руководство пользователя по подключению кабелей к серверной плате [52/128]

Превью страниц Страница 52 / 128

5-2

SUPERSERVER 1028R-WC1R(T) USER'S MANUAL

5-2 Connecting Cables

Now that the serverboard is installed, the next step is to connect the cables to the

board. These include the data cables for the peripherals and control panel and the

power cables.

Connecting Data Cables

The cables used to transfer data from the peripheral devices have been carefully

routed to prevent them from blocking the ﬂ ow of cooling air that moves through

the system from front to back. If you need to disconnect any of these cables, you

should take care to keep them routed as they were originally after reconnecting

them (make sure the red wires connect to the pin 1 locations). Important! Make

sure the cables do not come into contact with the fans.

Connecting Power Cables

The X10DRW-i(T) has a 24-pin primary power supply connector (JPW1) for

connection to the ATX power supply. In addition, there are two 8-pin 12V processor

power connectors (JPW2 and JPW3) that must be connected to your power supply.

See Section 5-8 for power connector pin deﬁ nitions.