Home
Главная
FIRST Austria
Электрический Чайник
FA-5406-7
Инструкция по эксплуатации Страница: 2

FIRST Austria FA-5406-7 [2/18] English

INSTRUCTION MANUAL

JUG KETTLE

SAVE THESE INSTRUCTIONS!

PRODUCT DESCRIPTION

1. Cover

2. Soft Eject Button

3. ON/OFF & Temperature control Switch

4. MAX Water Level Indicator

5. Cordless Power Base

6. 360° Connector

IMPORTANT SAFEGUARDS

When using your kettle, basic safety precautions

should always be followed, including the following:

1. Read all instructions carefully, even if you are

familiar with the appliance.

2. Close supervision is necessary when any

appliance is used by or near children.

3. Before connecting the kettle, check if the

voltage indicated on the appliance corresponds

with the mains voltage in your home. If this is

not the case, contact your dealer and do not

use the kettle.

4. Switch off and unplug from the outlet before

filling, emptying or cleaning, or when not in use.

5. Do not overfill as boiling water may be ejected.

The maximum level is marked inside the kettle.

6. Do not operate or place any part of this

appliance on or near any hot surface (such as

gas or electric burner or in a heated oven).

7. Do not let the cord hang over the edge of a

table or counter. Do not let the cord touch hot

surfaces.

8. Never yank on the cord as this may damage

the cord and eventually cause a risk of electric

shock.

9. If the supply cord of this appliance is damaged,

it must only be replaced by a repair shop

appointed by the manufacturer, because special

purpose tools are required.

10. Avoid touching hot kettle surfaces - use the

handle and the knobs.

11. To avoid possible steam damage, turn the spout

away from walls or cabinets when operating the

kettle.

12. If operated on wood furniture, use a protective

pad to prevent damage to delicate finishes.

13. To avoid scalding, always ensure the lid is

correctly positioned before operating.

14. Scalding may occur if the lid is removed whilst

heating.

15. Extreme caution must be used when moving the

kettle containing hot water. Never lift the kettle

by it’s lid. Always use the body handle.

16. Do not switch your kettle on if it is empty.

17. To protect from electrical hazard, do not

immerse this kettle or cordset in any liquid.

18. Use the kettle only with the supplied base unit.

Do not use the base unit for other purposes.

19. To protect against fire, do not operate in the

presence of explosive and/or flammable fumes.

20. A kettle should not be left connected to a wall

socket when the room temperature is likely to

fall to outdoor winter temperatures. At sub-zero

temperatures the automatic control thermostat

may reset to boil and energize the element.

21. Do not use the kettle for any purpose other

than heating water. Other liquids or food will

contaminate the interior.

22. This product has not been designed for any

other uses than those specified in this manual.

23. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

24. Children should be supervised to ensure that

they do not play with the appliance.

WARNING:

Compare the local voltage with the voltage declared

on the device.

INSTRUCTIONS FOR USE

1. Before first use, fill the kettle with clean water to

maximum capacity and boil. Discard the water

and repeat.

2. The kettle should always be unplugged when

filling or adding water.

3. Fill the kettle with water to the desired level. Do

not overfill or there will be a risk of spillage or

spitting. Do not forget to close the lid after filling,

otherwise the kettle will not automatically switch

off after use.

4. Do not fill with less than 0.5 litre of water (up to

„MIN“ indication) to prevent the kettle runnning

dry while operating.

5. Do not fill with more than 1.8 litres of water (up

to „MAX“ indication).

6. An automatic safety cut-out has been fitted for

protection against overheat ing. It will operate

if the kettle is switched on when containing

insufficient water. Always ensure that the water

inside the kettle covers the minimum mark.

If the automatic safety cut-out has operated,

disconnect from the power outlet and allow the

kettle to cool down for 5 to 10 minutes. Then

refill with water and switch on - the kettle will

then boil and cut off as in normal operation.

7. Place the power base on a dry flat surface.

8. Place the kettle on the power base.

The electrical connections will be made

automatically as the kettle slides onto the power

base.

9. Plug the cordset into an earthed power socket.

10. Press the

button, the kettle heats up and

a beep sounds. After the water has boiled the

indicator turns off and the buzzer sounds some

beeps.

11. When the water has boiled, the kettle will switch

off automatically.

12. Do not remove the kettle from the power base

without switching off first.

13. To pour water, lift the kettle from the power base

and pour.

ADVANCED OPERATION:

Keeping temperature mode

1. Press and hold the (ON/OFF) button for 2

seconds, a beep sounds from the buzzer and

the kettle is in “keeping temperature mode”.

The red illumination indicates that the kettle is in

“boiling water mode”.

It will keep the temperature above 85°C for 2

hours.

2. Press the button (+/-) once, the green

illumination indicates that the kettle is in “60°C

mode”. It will keep the temperature at 60°C for 2

hours.

3. Press the button (+/-) twice, the blue illumination

indicates that the kettle is in “70°C mode”. It will

keep the temperature at 70°C for 2 hours.

4. Press the button (+/-) 3 times, the yellow

illumination indicates that the kettle is in “80°C

mode”. It will keep the temperature at 80°C for 2

hours.

5. Press the button (+/-) 4 times, the purple

illumination indicates that the kettle is in “90°C

mode”. It will keep the temperature at 90°C for

2 hours.

Setting temperature only once

1. Press the (ON/OFF) button shortly, a beep

sounds from the buzzer and you can set now the

temperature. The red illumination indicates that

the water will be boiled.

2. Press the button (+/-) once, the green

illumination of 60°C turns on.

The heating element will switch off when the

water temperature reaches 60°C.

3. Press the button (+/-) twice, the blue illumination

of 70°C turns on.

The heating element will switch off when the

water temperature reaches 70°C.

4. Press the button (+/-) 3 times, the yellow

illumination of 80°C turns on.

The heating element will switch off when the

water temperature reaches 80°C.

5. Press the button (+/-) 4 times, the purple

illumination of 90°C turns on.

The heating element will switch off when the

water temperature reaches 90°C.

After use, please remove the plug from the

power outlet.

HOW TO CARE FOR YOUR KETTLE

Wipe the exterior of the kettle with a soft, damp

cloth or sponge. Remove stubborn spots with a

cloth moistened with mild liquid detergent. Do not

use abrasive scouring pads or powders. Never

immerse the kettle in water or other liquids.

From time to time depending on the nature of

your water supply, a lime scale deposit is naturally

formed and can be found mostly adhered to

the heating element and reduces the heating

capacity. The amount of lime scale deposited (and

subsequently the need to clean or descale) largely

depends on the water hardness in your area and

the frequency with which the kettle is used.

Limescale is not harmful to your health. But if

poured into your beverage, it can give a powdery

taste to your drink. Therefore, the kettle should be

descaled periodically as indicated below:

DESCALING

Descale the kettle regularly. With normal use, at

least twice a year.

1. Fill the kettle up to „MAX“ with a mixture of

one part ordinary vinegar and two parts water.

Switch on and wait for the appliance to switch

off automatically.

2. Let the mixture remain inside the kettle

overnight.

3. Throw the mixture away next morning.

4. Fill the kettle with clean water up to „MAX“ and

boil again.

5. Throw away this boiled water to remove any

remaining scale and vinegar.

6. Rinse the inside of the kettle with clean water.

360° CONNECTOR BASE

The 360° connector between the kettle and its base

means that the kettle can be located at any point on

the base. This is ideal for left and right-handed users

as the kettle can be positioned conveniently on your

kitchen counter.

TECHNICAL DATA:

220-240V • 50/60Hz • 1850-2200W

Environment friendly disposal

You can help protect the environment! Please

remember to respect the local regulations: hand

in the non-working electrical equipments to an

appropriate waste disposal center.

ENGLISH

FIRST Austria FA-5406-7 [2/18] English

Содержание

Похожие устройства