![Compak К6 [10/26] Installation](/img/pdf.png)
Compak К6 [10/26] Installation
![Compak К6 [10/26] Installation](/views2/1335834/page10/bga.png)
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 02/09/2016 | K01068
8
7. INSTALLATION
7.1. General Warnings
The person installing the grinder should carefully read this instruction manual
before installation. The installation of this machine should be completed by
qualied and authorized personnel, and all norms of safety and sanitation should be
followed.
7.2. Important Warnings
The operator of the grinder should be a responsible adult, and a never a minor
or person incapable of safely using such equipment. When using the grinder,
the following precautions should be followed:
• No bare feet.
• No wet hands or feet.
• Do not submerge in water.
• Do not expose the grinder to sun or other atmospheric conditions.
• Do not place any type of object in the coffee entrance or exit while the grinder
is running. (It should be kept in mind that the cutting burrs continue turning for
a couple revolutions after the grinder is powered off).
• To disconnect the grinder, use the main power switch and never the power
cable, to avoid a possible short circuit.
This unit is provided with an equipotential grounding lug that is to be properly
attached to the rear of the frame by the authorized installer. The installation
location is marked by the equipotential bonding symbol (5021 of IEC 60417-1)
on the unit´s frame. (Only for MASTER models).
Содержание
- Safety measures 3
- Description 4
- For the optimum functionality of the grinder models described in this user manual the maximum work cycles are as follows 4
- Sound decibel level 4
- The level of sound emitted in different models is 4
- Your new grinder has been designed using the most sophisticated technologies in existence the result is a product of high quality that offers the assurance of the best results possible our products are manufactured by hand one by one following the strictest quality requirements in the manufacturing process we use only the highest quality materials aluminum stainless steel etc especially designated for being in contact with food stuff 4
- Identification 5
- Instructions 5
- Note the manufacturer will not be held responsible for any damages resulting from improper use of the equipment or for not following the safety measures as outlined below 6
- Technical caracterisitics 6
- Technical data 6
- The coffee grinders are intended for use on commercial premises and facilities where ground coffee is required or in small stores that sell coffee the grinder must only be used to grind coffee beans any use other than this will be considered improper and dangerous 6
- Doser capacity 7
- Doser lever position 7
- Height width depth 7
- Hopper capacity 7
- In mm in mm in mm in mm in mm 7
- K01068 v 02 09 2016 ref quality process 002 03 original instructions 7
- Lb h kg h 7
- Mini hopper capacity optional 7
- Mini hopper height widht depth 7
- Net weight 7
- Production 50hz 7
- Production 60hz 7
- Production is based on a medium roasted coffee and an espresso grind 7
- Ø burrs 7
- External components 8
- General warnings 10
- Important warnings 10
- Installation 10
- Before grinder installation the following should be considered 11
- Grinder installation 11
- In mm in mm in mm 11
- K01068 v 02 09 2016 ref quality process 002 03 original instructions 11
- Model height width depth 11
- Note the grinder should be used in environments with mínimum temperature of 77 86f and should not be installed in places such as industrial kitchens where cleaning is done with direct water spray cleaning 11
- The electric power at the location of installation should meet the minimum required to properly run the grinder 11
- The electrical outlet coincides with the grinder plug 11
- The grinder information plaque data coincides with the electrical system on site 11
- The grinder should be installed on a flat stable surface the minimum dimensions of the work space should be as follows 11
- The grinder should be properly grounded as specified by local code 11
- The installation site should have the proper electrical overload protections 11
- Where to use 11
- Grinder set up 12
- Regulation 12
- Grind adjustment system 13
- Micrometrical system parallel micrometrical system 13
- Stepped grind adjustment 13
- Regulating the coffee serving 14
- Main switch 15
- Operation 15
- Static press 16
- Telescopic press 16
- Bean hopper cleaning 17
- Cleaning 17
- General cleaning 17
- Grind chamber cleaning 17
- Ground coffee deposit cleaning 17
- Cleaning the outside of the grinder 18
- General warning 18
- Maintenance 18
- Dull burrs will result in a lower quality grind greater heat generation in the coffee and grinder increased electrical consumption and finally it puts additional stress on the grinder motor 19
- General maintenance of the grind chamber 19
- Grinding group maintenance 19
- Not following the recommended burr life guidelines can compromise the safety of the grinder these operations should be done by a qualified service tecnician 19
- Note based on extensive experience and a medium hard coffee blend we recommend replacing the burrs after grinding 350 kg 770 lb of coffee 19
- To guarantee the efficiency and correct operation of the grinder it is essential to follow manufacturer instructions and ensure that all maintenance work is carried out by qualified staff 19
- To perform grind chamber maintenance please observe the following steps 19
- Models with flat burrs k3 k6 and k8 21
- Models with conical burrs k10 23
- Ec conformity 25
- Environment 25
Похожие устройства
- Caso Nova B4 Инструкция по эксплуатации
- Caso VC 300 Инструкция по эксплуатации
- Caso MCG25 сhef black Инструкция по эксплуатации
- Caso IMCG25 Инструкция по эксплуатации
- Caso MCG25 сhef Инструкция по эксплуатации
- Caso MCG30 сhef Инструкция по эксплуатации
- Caso MG20 menu Инструкция по эксплуатации
- Caso TMCG25 сhef touch Инструкция по эксплуатации
- Daikin BRC1E53C Инструкция по эксплуатации
- Daikin BRC1E53C Руководство по монтажу
- Daikin BRC1E53C Схема
- Amitek FT3L Инструкция по эксплуатации
- Amitek FT3L Сертификат
- Amitek FE8R Инструкция по эксплуатации
- Amitek FE8R Сертификат
- Amitek FE88R Инструкция по эксплуатации
- Amitek FE88R Сертификат
- Caso W 3500 Инструкция по эксплуатации
- Caso S-Line 3500 Инструкция по эксплуатации
- Caso Pro 3500 Инструкция по эксплуатации