Janome JEM PLATINUM 760 [33/46] Button sewing

Превью страниц Страница 33 / 46

Button Sewing

Unthread the needle thread.

Place a button on the fabric and lower the needle

by turning the handwheel, so that the needle

enters into the left hole in the button.

Align the holes in the button with the slot on the

foot and lower it to hold the button in place.

Turn the handwheel several times until the needle

bar swings to the right.

Adjust the stitch width so the needle enters into

the right hole in the button.

Rethread the machine and sew about 10 stitches

at a slow speed.

Raise the presser foot and remove the fabric.

Trim both needle and bobbin threads at the

beginning.

Cut both threads leaving 8” (20 cm) tails.

Pull the bobbin thread to bring the needle thread to

the wrong side of the fabric then knot the threads.

After sewing is finished, raise the feed dog.

Machine Settings

q Pattern: #05

w Presser foot: Satin stitch foot F

e Thread tension: 3 – 7

e Feed dog: Lowered