![Janome JEM PLATINUM 760 — как правильно пришить молнию: пошаговое руководство [34/46]](/icons/site-icon-64.png){kind=icon}
Janome JEM PLATINUM 760 — как правильно пришить молнию: пошаговое руководство [34/46]
Превью страниц
Страница 34 /
46
![Janome JEM PLATINUM 760 [34/46] Zipper sewing](/views2/1341707/page34/bg22.png)
32
Zipper Sewing
Attaching the zipper foot (optional item)
(A) Attach zipper foot E with the pin on the right-
hand side to the groove to sew the left side of
the zipper.
(B) Attach zipper foot E with the pin on the left-
hand side to the groove to sew the right side of
the zipper.
q Pin
w Groove
NOTE:
The zipper foot is available as an optional item.
Fabric preparation
z Add 3/8” (1 cm) to the zipper size. This is the
overall opening size.
q Right side of the fabric
w 3/8” (1 cm)
e Opening size
r Zipper size
t Slider
y Zipper teeth
u Zipper tape
i Wrong side of the fabric
o End of the opening
x Place the right (top) sides of the fabric together.
Sew a bottom seam 5/8" (2 cm) from the right edge
to the zipper bottom stop position. Sew a few
stitches in reverse to lock.
Increase the stitch length to “4”, set needle thread
tension to “1”, and baste the entire length of the
fabric.
!0 5/8” (2 cm)
!1 Basting
!2 Reverse stitch
!3 End of the opening
!4 Bottom seam
CAUTION:
When sewing with the zipper foot, make sure to use
pattern #01 (straight stitch with the center needle
position). Otherwise the needle may hit the foot and
possibly break.
Machine Settings
q Pattern: #01
w Presser foot: Zipper foot E (optional item)
e Thread tension: 2 – 6
To sew
z Attach zipper foot with the right side pin.
Fold back the upper layer seam allowance. Fold
back the lower layer seam allowance to leave a
1/8" (0.4 cm) margin of fabric.
q Lower layer
w End of the opening
e Zipper teeth
r 1/8” (0.4 cm) margin
t Upper layer
y Opening size
u Folded edge
q
w
(A)
(B)
q
w
e
r
t
y
u
z
x
z
e
r
t
y
u
i
o
!1
!2
!3
!4
q
w
!0
q
w
e
Содержание
62- Warnin
- The design and specifications are subject to change without a prior notice
- Important safety instructions
- Save these instructions
- Know your machine
- Setting the spool pin
- Name of parts
- Standard accessories
- Extention table
- Warning
- Getting ready to sew
- Connecting the power supply
- Controlling sewing speed
- Function buttons
- Warning
- Dropping the feed dog
- Detaching and attaching the foot holder
- Changing the presser foot
- Raising and lowering the presser foot
- Balancing thread tension
- Needle and thread chart
- Changing needles
- Always make sure to turn the power switch off and disconnect the machine from power supply before changing the needle
- Z loosen the needle clamp screw by turning it counterclockwise remove the needle from the clamp q needle clamp screw
- X insert a new needle into the needle clamp with the flat side of the needle to the rear when inserting the needle into the needle clamp push it up against the stopper pin and tighten the needle clamp screw firmly w stopper pin e flat side
- Warning
- To check needle straightness place the flat side of the needle onto something flat a needle plate glass etc the gap between the needle and the flat surface should be consistent never use a blunt needle r gap
- Raise the needle by turning the handwheel and lower the presser foot turn off the power switch
- Winding the bobbin
- Warning
- Threading the machine
- Needle threader
- Drawing up the bobbin thread
- Straight stitch
- Basic stitches
- Variety of straight stitches and recommended feet
- Zigzag stitch
- Overcasting with zigzag stitch
- Multiple zigzag stitch tricot stitch
- Utility stitches
- Buttonholes
- Button sewing
- Zipper sewing
- Caution
- Blind hemming
- Eyelet
- Patchwork
- Decorative sewing
- Applique
- Smocking
- Scallop stitch
- Decorative satin stitches
- Fagoting
- Cross stitch
- Correcting distorted stretch patterns
- Pattern combination
- Warning
- Replacing the bobbin holder
- Cleaning the hook race and feed dogs
- Care and maintenance
- Problems and warning signals
- Troubleshooting
Похожие устройства
-
Janome TOP 14Инструкция к устройству -
Janome TOP 12Руководство по использованию
-
Janome ESCAPE V-17Руководство по эксплуатации
-
Janome S-21Инструкция по работе
-
Janome LADY 725Руководство по настройке -
Janome S-19Руководство по эксплуатации -
Janome ARTDECOR 724EРуководство по эксплуатации -
Janome ARTDECOR 724AРуководство по эксплуатации
-
Janome LEGEND LE-35Руководство по эксплуатации -
Janome ARTDECOR 718AРуководство по эксплуатации -
Janome S-17Руководство по эксплуатации
-
Janome LW 20Инструкция по эксплуатации
Узнайте, как правильно пришить молнию с помощью специальной лапки. Пошаговые инструкции и советы по подготовке ткани и настройке машины.