Janome JEM PLATINUM 760 — настройки швейной машины для аппликации и патчворка [38/46]
Превью страниц
Страница 38 /
46
![Janome JEM PLATINUM 760 [38/46] Decorative sewing](/views2/1341707/page38/bg26.png)
36
Patchwork
Machine setting
q Stitch pattern: #28, #51 or #53
w Presser foot: Satin stitch foot F
e Thread tension: 1 – 4
Applique
Machine setting
q Stitch pattern: #22 – #25 or #45
w Presser foot: Satin stitch foot F
e Thread tension: 1 – 4
Place the applique on the fabric and baste it in
place. Sew, guiding the edge of the applique along
the slit on the foot, so that the needle falls off the
edge of the applique when it swings to the right.
NOTE:
When changing the sewing direction at a corner or
curve, lower the needle into the applique at the left
swing and turn the fabric to a new direction.
Seam the patchwork pieces with straight stitch and
press seam allowance to open. Sew pattern #28, #51
or #53 on the right side of garment centering over the
seam line.
q
w
e
q
w
e
DECORATIVE SEWING
Содержание
62- Warnin
- The design and specifications are subject to change without a prior notice
- Important safety instructions
- Save these instructions
- Know your machine
- Setting the spool pin
- Name of parts
- Standard accessories
- Extention table
- Warning
- Getting ready to sew
- Connecting the power supply
- Controlling sewing speed
- Function buttons
- Warning
- Dropping the feed dog
- Detaching and attaching the foot holder
- Changing the presser foot
- Raising and lowering the presser foot
- Balancing thread tension
- Needle and thread chart
- Changing needles
- Always make sure to turn the power switch off and disconnect the machine from power supply before changing the needle
- Z loosen the needle clamp screw by turning it counterclockwise remove the needle from the clamp q needle clamp screw
- X insert a new needle into the needle clamp with the flat side of the needle to the rear when inserting the needle into the needle clamp push it up against the stopper pin and tighten the needle clamp screw firmly w stopper pin e flat side
- Warning
- To check needle straightness place the flat side of the needle onto something flat a needle plate glass etc the gap between the needle and the flat surface should be consistent never use a blunt needle r gap
- Raise the needle by turning the handwheel and lower the presser foot turn off the power switch
- Winding the bobbin
- Warning
- Threading the machine
- Needle threader
- Drawing up the bobbin thread
- Straight stitch
- Basic stitches
- Variety of straight stitches and recommended feet
- Zigzag stitch
- Overcasting with zigzag stitch
- Multiple zigzag stitch tricot stitch
- Utility stitches
- Buttonholes
- Button sewing
- Zipper sewing
- Caution
- Blind hemming
- Eyelet
- Patchwork
- Decorative sewing
- Applique
- Smocking
- Scallop stitch
- Decorative satin stitches
- Fagoting
- Cross stitch
- Correcting distorted stretch patterns
- Pattern combination
- Warning
- Replacing the bobbin holder
- Cleaning the hook race and feed dogs
- Care and maintenance
- Problems and warning signals
- Troubleshooting
Похожие устройства
-
Janome TOP 14Инструкция к устройству -
Janome TOP 12Руководство по использованию -
Janome ESCAPE V-17Руководство по эксплуатации -
Janome S-21Инструкция по работе -
Janome LADY 725Руководство по настройке -
Janome S-19Руководство по эксплуатации -
Janome ARTDECOR 724EРуководство по эксплуатации -
Janome ARTDECOR 724AРуководство по эксплуатации -
Janome LEGEND LE-35Руководство по эксплуатации -
Janome ARTDECOR 718AРуководство по эксплуатации -
Janome S-17Руководство по эксплуатации -
Janome LW 20Инструкция по эксплуатации
Узнайте, как правильно настроить швейную машину для аппликации и патчворка. Подробные инструкции по выбору стежков и давлению лапки.